LG Projector PW600G User Manual

							513D FUNCTION
Requirements for Watching 3D Images
*  Optimum viewing angle: Top/Bottom/Left/Right 9° 
Recommended viewing distance: 3 m to 5 m 
Recommended screen size: 101 cm
* Watching 3D videos should be done in dark room environments only. 
 NOTE
 
y  
The pairing with the DLP-LINK glasses is affected by the intensity of light reflected 
from the screen. 
 
Therefore, the pairing with DLP-LINK glasses may not work properly if th\
e light 
reflected from the screen is not bright enough, such as when the surroun\
ding area 
is bright, the screen is big, or the maximum energy saving mode is enabl\
ed.
 
y    
Some menus may not work while playing a 3D video.
 
y  
You can only watch a 3D video properly when the 3D video format option ha\
s been 
selected on the projector.  
						

							523D FUNCTION
1 Please check the minimum system requirements for your computer. Minimum 
requirements are as follows: 
Microsoft® Windows®  XP, Vista 32/64 bit ,Windows 7 32/64 bit 
Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higher
More than 1 GB of system memory (2 GB recommended)
Free space of 100 MB or more
DirectX 9 or higher
  Video card should support 120 vertical frequency (Hz).
  Recommended video card requirements
           - Graphic  Processor speed  700 MHz higher
           - Memory  512 MB higher
 y A laptop equipped with the chipsets above can be used but it may not work\
 properly.
2 Set the video output to XGA 120 Hz and play a video file using a video player that 
supports 3D output. 
The following video players support 3D output: Stereoscopic Player, nVidia 3D 
Vision, and TriDef 3D.  
For more information on the players above, please visit their websites a\
t: 
www.3dtv.at 
www.nvidia.com 
www.tridef.com  
						

							533D FUNCTION
To Use DLP-LINK (DLP-Ready) Type Glasses
1 While watching 3D images from the projector, press buttons on the glasses.
2   When you press the button, the glasses flicker to be synchronized with the 3D 
images.  
(The flickering is a unique operation method of DLP-LINK type glasses. It may be 
different depending on the glasses type.)
 3 If the glasses flicker or problems occur while watching 3D, first turn the lights off to 
make the room darker. Contact your projector seller for queries about the glasses.  
Supported 3D input formats
InputSignalResolution
Vertical 
Frequency 
(Hz)
Supported 3D Formats
HDMIXGA1024 x 768120Frame Sequential / Frame Alternative
RGB-PCXGA1024 x 768120Frame Sequential / Frame Alternative
 y The resolution supporting 3D mode is 1024 x 768 for HDMI and RGB input.
 y Some menus may not work in 120 Hz input.
Watching 3D Images
1 Play supported 3D video titles. 
2 For RGB-PC, you must press AUTO on the remote control before watching 3D.
3 Press the 3D button.
4 While watching 3D images from the projector, press buttons on the glasses.
5 Press the L/R button to switch the playing direction of an image. Select a screen 
with better 3D display quality.
 y If you press the 3D button during viewing, it returns to 2D.  
						

							54CUSTOMIZING SETTINGS 
CUSTOMIZING SETTINGS
SETTINGS
*  
The illustration of the menu may differ from the actual screen on the product.  
The illustration of Settings is from the PW800G model.
1 Press the SETTINGS button.
2 Use the , , , or  button to select the desired item and press the OK button.
3 Use the , , , or  button to set up the desired item and press the OK button.
4 Press the EXIT button when completed.
MenuDescription
PICTUREAdjusts the image quality for optimal viewing.
AUDIOAdjusts the sound quality and volume level.
TIMESets time-related settings.
WIRELESSWireless-related features. 
(Available for the PW800G model only.)
INFORMATIONShows information about the Projector. 
(Available for the PW600G model only.)
OPTION 1Customizes the general settings.
OPTION 2Customizes the settings related the projector.
INPUTSelects the desired input source.
MY MEDIAAccesses photo, music, movie, and document files.  
						

							55CUSTOMIZING SETTINGS 
PICTURE Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select  
PICTURE and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available picture settings are described as follows.
ItemDescription
Energy 
Saving
Reduces power consumption by adjusting peak screen brightness.
Mode
Minimum/ 
Medium/ 
Maximum
Applies the pre-set Energy Saving mode.
Picture 
Mode
Selects the picture mode optimized for the viewing environment or the 
program.
You can also customize advanced options for each mode.
Mode
VividMaximizes the visual effect of video.
Heightens contrast, brightness and sharpness to display 
vivid images.
Standard Displays images in standard levels of contrast, 
brightness and sharpness.
CinemaOptimizes the image for a movie.
SportOptimizes the image for sports by emphasizing primary 
colors and dynamic actions.
GameOptimizes the image for playing games on fast-moving 
screens.
Expert1/2Menu for adjusting picture quality that allows experts 
and amateurs to enjoy the best Projector viewing.
-  Expert mode is for picture tuning professionals to 
control and fine-tune using a specific image. For 
normal images, the effects may not be dramatic.
ContrastAdjusts the difference between bright and dark regions of the screen.
0033002C002600370038003500281BD20003
0003
y 1C1A00030028005100480055004A005C0003003600440059004C0051004A00030003000300030003001D0003003000480047004C00580050
0003
y 0033004C00460057005800550048000300300052004700480003
000300030003000300030003000300030003000300030003001D000300360057004400510047004400550047
0003
y 00260052005100570055004400560057000300030003001400130013
0003
0003
0003
y 00250055004C004A004B00570051004800560056000300030003001800130003
0003
y 0036004B004400550053005100480056005600030003001400130003
0003
y 00260052004F005200550003000300030003000300030003000300030003001800180003
0003
y 0037004C0051005700030003000300030003000300030003000300030003000300030003
001300030035 002A    
						

							56CUSTOMIZING SETTINGS 
ItemDescription
BrightnessAdjusts the overall screen brightness.
SharpnessAdjusts the sharpness of the borders between bright and dark.
Horizontal and Vertical Sharpness are available only in Expert1/2.
ColorAdjusts the intensity of all colors.
TintAdjusts the balance between red and green levels.
Advanced 
Control
Customizes the advanced settings.
Picture  
Option
Sets optional settings.
Picture 
Reset
Resets values customized by the user.
Each picture mode is reset. Select the picture mode you wish to reset.
Aspect 
Ratio
Resizes the picture.
Screen 
(RGB-PC)
Adjusts the picture quality of RGB-PC input.
Option
ResolutionAvailable resolutions are 768 resolution (1024 x 768/ 
1280 x 768/ 1360 x 768, 60 Hz) and 1050 resolution 
(1400 x 1050/ 1680 x 1050, 60 Hz).
Auto Config.Provides optimized picture quality by automatically 
calibrating the mismatch of horizontal width and picture 
shake caused by clashes between the internal settings 
of the projector and various PC graphic signals.
 yYou can also use the AUTO button on the remote 
control.
PositionMoves the image up/down/left/right.
SizeChanges the screen size.
PhaseMakes the picture look clear by removing horizontal 
noise.
ResetRestores all the settings to the factory default.  
						

							57CUSTOMIZING SETTINGS 
Advanced Control
ItemDescription
Dynamic 
Contrast
Adjusts contrast and colour to the optimal level according to the 
screen’s brightness.
Dynamic 
Color
Adjusts colours for more natural-looking colours.
Color GamutSelects the range of colours that can be expressed.
 y Standard:  Displays the original colors of an input signal regardless 
of the display features.
 y Wide: Makes use of the display's rich colors.
Skin ColorSkin colour spectrum can be separately set to implement the skin 
colour as defined by the user.
Sky ColorSky colour is set separately.
Grass ColorNatural colour spectrum (meadows, hills, etc.) can be separately set.
GammaSets the gradation curve according to the output of the picture signal i\
n 
relation to the input signal.
*   Depending on input signal or other picture settings, the range of detail\
ed items for 
adjustment may differ.
Expert Control
ItemDescription
Dynamic 
Contrast
Adjusts contrast and colour to the optimal level according to the 
screen’s brightness.
Color GamutSelects the range of colours that can be expressed.
 y Standard:  Displays the original colors of an input signal regardless 
of the display features.
 y Wide: Makes use of the display's rich colors.
Edge  
Enhancer
Shows clearer and distinctive yet natural edges of the video.
Color FilterFilters a specific colour spectrum in RGB colours to fine-tune colour 
saturation and hue accurately.  
						

							58CUSTOMIZING SETTINGS 
ItemDescription
Color  
Temperature
In Expert mode, you can customize the options of each mode.
Gamma: Select 1.9, 2.2, or 2.4.
a.  Method: 2 Points 
- Pattern: Inner, Outer 
- Points: Low, High 
-  Red/Green/Blue: Adjustable  range -50 to +50.
- Apply to all inputs:  The values of the Color Temperature is 
applied to all the input modes.
b.   Method: 20 Point IRE 
- Pattern: Inner, Outer 
- IRE (Institute of Radio Engineers) is the unit indicating the size 
of a video signal and can be set to 0, 5, 10, 15, ... 100.You can fine-
tune for each setting as shown below.
- Luminance: The adjustment range is 50 to 500.
- Red/Green/Blue: The adjustment range is -50 to +50.
- Apply to all inputs:  
The values of the Color Temperature is 
applied to all the input modes.
Color  
Management 
System
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an 
expert to adjust the tint using a test pattern. Six colors (Red/Green/
Blue/Cyan/Magenta/Yellow) can be selectively adjusted without 
affecting other colors. You may not see colors change on a normal 
picture even after adjustment.
-  Saturation Red/Green/Blue/Yellow/Cyan/Magenta,  
Tint Red/Green/Blue/Yellow/Cyan/Magenta,  
Luminance Red/Green/Blue/Yellow/Cyan/Magenta: 
The adjustment range is -30 to +30 each.
*   Depending on input signal or other picture settings, the range of detail\
ed items for 
adjustment may differ.  
						

							59CUSTOMIZING SETTINGS 
Picture Option
ItemDescription
Noise  
Reduction
Reduces screen noise in the video.
MPEG Noise 
Reduction
Eliminates noise generated while creating digital picture signals.
Black LevelAdjusts the brightness or darkness of the screen to suit the black level\
 of 
the picture input using the degree of darkness (black level) of the sc\
reen.
Real CinemaOptimizes the screen for movie viewing.
Color  
Temperature
Adjusts the overall color of the screen to suit your preference.
Select Warm, Cool, Medium, or Natural.  
						

							60CUSTOMIZING SETTINGS 
AUDIO Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select AUDIO 
and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available audio settings are described as follows.
ItemDescription
Sound ModeSets the sound mode.
Mode
StandardSuitable for all types of video.
News/ Music/ 
Cinema/ Sport/ 
Game
Sets audio optimized for a specific genre.
Sound EffectThe user can select various sound effects. 
Mode
Clear Voice IIMakes the voice from the projector crisp and clear.
Virtual  
Surround
LG’s proprietary audio processing technology 
allows 5 channel-like surround sound from two 
speakers.
 yWhen Clear Voice II is set to on, Virtual 
Surround cannot be selected. 
EqualizerAdjusts the volume to a level of your choice using 
the Equalizer. 
 yAudio-band (100 Hz/ 300 Hz/ 1 kHz/ 3 kHz/  
10 kHz) can be adjusted from - 10  to 10.
 yReset: Resets voice options that the user has 
changed. 
BalanceAdjusts the balance of the left and right speakers.
ResetInitialize the applied effect under the Sound Effect 
menu. 
Auto VolumeAutomatically adjusts the volume level.
002400380027002C00321BD20003
y
y 00360052005800510047000300300052004700480003
000300030003000300030003000300030003000300030003001D000300360057004400510047004400550047
y
y 003600520058005100470003002800490049004800460057
y
y 0024005800570052000300390052004F0058005000480003
0003000300030003000300030003
00030003000300030003001D0003003200490049