LG Projector PH150G User Manual

							 PH150G
Please read the safety information carefully before using this product.
Owner's Manual
LG Minibeam Nano 
Lcos Projector
www.lg.com
P/NO : SAC37034653 (1609-REV00)  
						

							2
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available  at [www.divx.com/patents]
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This device meets the EMC requirements for home appliances (Class 
B) and is intended for home usage. This device can be used in all regions.

•	Image shown may differ from your projector. 
•	 Your projector’s OSD (On Screen Display) may differ slightly from 
that shown in this manual.
NOTE
ENGLISH  
						

							3
SAFETY	PRECAUTIONS
Please take note of the safety instructions to prevent any potential acc\
ident or misuse of the projector.
•	Safety precautions are given in two forms, i.e., WARNING and CAUTION as detailed below. WARNING  Failure to follow the instructions may cause serious injury and even death. CAUTION  Failure to follow the instructions may cause personal injury or product damage.
•	Read the owner's manual carefully and keep it on hand.
WARNING/CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with 
arrowhead symbol, within 
an equilateral triangle, is 
intended to alert the user to the 
presence of uninsulated dangerous 
voltage within the product’s 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point  within an equilateral 
triangle is intended to alert 
the user to the presence of 
important operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the device.
WARNING/CAUTION
 
- TO REDUCE THE RISK 
OF FIRE AND ELECTRIC 
SHOCK, DO NOT EXPOSE 
THIS PRODUCT TO RAIN OR 
MOISTURE.
Read	these	instructions. 	
Keep	these	instructions.	
Heed	all	warnings.	
Follow	all	instructions.
Indoor	Installation
	WARNING
•	Do not use the projector outside and do not expose the product to any humidity or water. -Since the product is not waterproof, this may result in a fire or electric shock.
•	Do not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc. -This may result in fire.
•	Do not place flammable materials such as aerosols near the projector.
 -This may result in fire.
ENGLISH  
						

							4
•	Do not allow children to cling to or climb up to the projector. -This may cause the projector to fall, causing injury or death.
•	Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. -This may result in fire due to the increase in internal temperature.
•	Do not place the product close to sources of steam, oil or oil mist, such as humidifiers and kitchen counters. -Failure to do so may result in fire, electric shock, or corrosion.
•	Do not install the product onto a wall or ceiling that is close to sources of oil or oil mist. -The product may be damaged and fall, resulting in serious injury.
•	Do not place the projector where it might be exposed to dust. -This may result in fire.
•	Do not use the projector in a damp place such as a bathroom where it is likely to get wet. -This may result in fire or electric shock.
•	Do not allow a tablecloth or curtain to block the air vent. -This may result in fire due to the increase in the internal temperature.
•	Ensure good ventilation around the projector. The distance between the projector and the wall should be at least 30 cm. -This will prevent fire due to the increase in the internal temperature.
	CAUTION
•	When placing the projector on a table or shelf, be careful not to put it near the edge. -The projector could fall due to balance problems, which may cause personal injury or damage to the product. Make sure to use the projector cabinet or stand that fits the projector.
ENGLISH  
						

							5
•	When moving the projector, make sure to switch it off and remove the power plug and cords. -The power cord may be damaged, resulting in fire or electric shock.
•	Do not place the projector on an unstable or vibrating surface such as a wobbly shelf or a slope. -It may fall and cause injury.
•	Be careful not to tip the projector over when connecting external devices to the projector. -This may cause personal injury or damage to the projector.
Power
	WARNING
•	DISCONNECTING THE DEVICE FROM THE MAIN POWER -The Power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.
•	The grounding wire should be connected. (Except for devices which are not grounded.) -Ensure that you connect the grounding cable to avoid electric shock.  If it is not possible to ground the unit, have a qualified electrician install a separate circuit breaker. Do not try to ground the projector by connecting it to telephone wires, lightning rods, or gas pipes.
•	The power plug should be inserted fully into the power outlet. -An unstable connection may cause a fire.
•	Do not place heavy objects on the power cord. -This may result in fire or electric shock.
•	Never touch the power plug with wet hands. -This may result in electric shock.
•	Do not plug too many devices into one multi-power outlet. -This may result in fire due to the power outlet overheating.
ENGLISH  
						

							6
•	Keep the AC adapter, power plug, and the used power outlet clean from dust or foreign materials building up. –This may result in fire.
•	If there is any smoke or a burning smell from the projector or AC adapter, stop using the product immediately. Disconnect the power cord from the power outlet, and then contact the customer service center. –This may result in fire.
•	To turn off the main power, remove the power plug, which should be positioned so it is easy to access for operation.
	CAUTION
•	Always grab the plug to remove the AC adapter or power cord. –Otherwise, this may result in a fire or may damage the product.
•	Refrain from constantly bending the power cord of the AC adapter. –If the power cord is bent excessively for a long period of time, the cord may break inside. This may result in a fire or electric shock.
•	Ensure the power cord and plug are not damaged, modified, severely bent, twisted, pulled, 
sandwiched or hot. Do not use the product if the power outlet is loose. –This may result in fire or electric shock.
•	Keep the power cord away from heating devices. -The wire's sheath may melt, which may result in fire or electric shock.
ENGLISH  
						

							7
•	Place the projector where people will not trip over or step on the power cord to protect the power cord and plug from any damage. -This may result in fire or electric shock.
•	Do not turn the projector on or off by plugging in the power plug or unplugging it from the power outlet. (Do not use the power plug as a switch.) -This may result in electric shock or damage to the product.
•	Do not insert a conductor into the other side of the wall outlet while the power plug is inserted into the wall outlet. In addition, do not touch the power plug immediately after it is disconnected from the wall outlet. -This may result in electric shock.
•	Only use the official power cord provided by LG Electronics. Do not use other power cords. -This may result in fire or electric shock.
•	If any water or foreign materials have gone into the AC adapter, power cord, or the interior of the projector, turn off the projector by pressing the power button. Remove all the cables, and then contact the customer service center. –This may result in fire or electric shock.
•	The surface of the AC adapter is hot. Keep the AC adapter out of the reach of children and avoid touching it during use.
•	Never disassemble the power supply devices (AC adapter/power cord, etc.). –This may damage the power cord and result in a fire or electric shock.
•	Connect the AC adapter and the power cord firmly. –Not doing so may result in a product failure or fire.
ENGLISH  
						

							8
•	Do not place heavy objects or put pressure on the power cord and AC adapter and avoid damage. –This may result in a fire or may damage the product.
•	Always use the AC adapter provided or any AC adapters approved and certified by LG Electronics. –Any other AC adapter connected may result in the screen flickering.
When	in	Use
	WARNING
•	Do not place anything containing liquid on top of the projector such as a vase, flower pot, cup, cosmetics, medicine, or ornaments, candles, etc. -This may result in fire or electric shock, or cause injury due to falling.
•	In the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized service center. -This may result in electric 
shock.
•	Do not insert pieces of metal such as coins, hairpins, or metal debris, nor flammable materials such as paper or matches into the projector. -This is to prevent electric shock or fire.
ENGLISH  
						

							9
•	Make sure that a child does not swallow the batteries when you replace the old remote control batteries with new ones. Keep batteries out of reach of children. -If a child swallows a battery, consult a doctor immediately.
•	Never open any cover on the projector. -There is a high risk of electric shock.
•	Do not look directly into the lens when the projector is in use. -The bright light may damage your eyes.
•	When the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot.
•	If there is a gas leak in the room with the projector, do not touch the projector or power outlet. Open the windows for ventilation. -Sparks may cause fire or burns.
•	Unplug the power cord from the outlet during a lightning storm. -This will prevent shock or 
damage to the projector.
•	Do not use the projector near electronic devices that generate a strong magnetic field.
•	Keep the plastic film used for packaging the projector out of the reach of children. –If not handled safely, it can cause suffocation.
•	Do not keep your hand on the projector for a long time when it is running.
•	When you play a game by connecting a game console to a projector, it is recommended that you maintain a distance of more than four times the diagonal length of the screen. -Make sure that the connecting cable is long enough. Otherwise, the product may fall causing personal injury or damage to the product.
•	Do not place the projector or its remote control with battery in an extremely high temperature environment. -This may result in fire.
ENGLISH  
						

							10
	CAUTION
•	Do not place heavy objects on the projector. -It may fall down and cause personal injury.
•	Be careful not to allow any impact to the lens during transport.
•	Do not touch the lens of the projector. -The lens may be damaged.
•	Do not use any sharp tools on 
the projector such as a knife or hammer, because this may damage the casing.
•	In the event that no image appears on the screen or no sound is heard, stop using the projector. Switch off the projector, unplug it from the power outlet and contact our service center. -This may result in fire or electric shock.
•	Do not drop anything onto the projector or allow anything to bang into the projector. -This may cause damage to the projector or personal injury.
•	It is recommended that you maintain a distance of more than 5 to 7 times the diagonal length of the screen. –If you watch the screen at a close distance for a long time, your eye sight may become worse.
•	Do not block the light beam emitted from the projector using a book or other object. -Lengthy exposure to the projector beam may result in fire. In addition, the lens may be overheated and damaged by the reflected heat. Disable the AV function to stop projection temporarily or turn off the power.
•	Do not start the projector with the volume turned up high. -High volume may damage hearing.
•	Do not use high voltage electrical equipment near the 
projector, (e.g., a bug zapper). This may result in product malfunction.
ENGLISH