LG Projector Minibeam UST PF1000U User Manual

www.lg.com
Owner's Manual
LG Minibeam UST
DLP Projector
PF1000U
Please read the safety information carefully before using this product.  

2LICENSES
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX®...

3LICENSES
This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions.
 
•	Image shown may differ from your projector. 
•	 Your projector’s OSD (On Screen Display) may differ slightly from 
that shown in this manual.
NOTE  

4SAFETY	PRECAUTIONS
SAFETY	PRECAUTIONS
Please take note of the safety instructions to prevent any potential acc\
ident or misuse of the projector.
•	Safety precautions are given in two forms, i.e., WARNING and CAUTION as detailed below. WARNING  Failure to follow the instructions may cause serious injury and even death. CAUTION  Failure to follow the instructions may cause personal injury or product damage.
•	Read the owner's manual carefully and keep it on hand.
WARNING/CAUTIONRISK OF ELECTRIC...

5SAFETY	PRECAUTIONS
•	Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. –This may result in fire due to the increase in internal temperature.
•	Do not place the product close to sources of steam, oil or oil mist, such as humidifiers and kitchen counters. –Failure to do so may result in fire, electric shock, or corrosion.
•	Do not install the product onto a wall or ceiling that is close to sources of oil or oil mist. –The product may...

6SAFETY	PRECAUTIONS
 –Please make sure the device is installed near the wall outlet to which it is connected.
•	The grounding wire should be connected. –Ensure that you connect the grounding cable to avoid electric shock. If it is not possible to ground the unit, have a qualified electrician install a separate circuit breaker. Do not try to ground the projector by connecting it to telephone wires, lightning rods or gas pipes.
•	The power plug should be inserted fully into the power outlet. –An unstable...

7SAFETY	PRECAUTIONS
•	Place the projector where people will not trip over or step on the power cord to protect the power cord and plug from any damage. –This may result in fire or electric shock.
•	Do not turn the projector on or off by plugging in the power plug or unplugging it from the power outlet. (Do not use the power plug as a switch.) –This may result in electric shock or damage to the product.
•	Do not insert a conductor into the other side of the wall outlet while the power plug is inserted...

8SAFETY	PRECAUTIONS
•	In the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized service center. –This may result in electric shock.
•	Do not insert pieces of metal such as coins, hairpins or metal debris, nor flammable materials such as paper or matches into the projector. –This is to prevent electric shock or fire.
•	Make sure that a child does not swallow the batteries when you replace the old remote control batteries...

9SAFETY	PRECAUTIONS
	CAUTION
•	Do not place heavy objects on the projector. –It may fall down and cause personal injury.
•	Be careful not to allow any impact to the lens during transport.
•	Do not touch the lens of the projector. –The lens may be damaged.
•	Do not use any sharp tools on 
the projector such as a knife or hammer, because this may damage the casing.
•	In the event that no image appears on the screen or no sound is heard, stop using the projector. Switch off the projector, unplug it from the...

10SAFETY	PRECAUTIONS
•	Use air spray, a soft cloth or a cotton swab moistened with a lens cleaning chemical or alcohol to remove dust or stains on the front projection lens.
	CAUTION
•	Contact your seller or our service center once a year to clean the internal parts of the projector. –If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector.
•	When cleaning plastic parts such as the projector case, unplug the power first and...