LG Projector Minibeam PW800 User Manual

							61CUSTOMIZING SETTINGS 
Advanced Control
ItemDescription
Dynamic 
Contrast
Adjusts contrast and color to the optimal level according to the 
screen’s brightness.
Dynamic 
Color
Adjusts colors for more natural-looking colors.
Color GamutSelects the range of colors that can be expressed.
 y Standard:  Displays the original colors of an input signal regardless 
of the display features.
 y Wide: Makes use of the display's rich colors.
Skin ColorSkin color spectrum can be separately set to implement the skin color 
as defined by the user.
Sky ColorSky color is set separately.
Grass ColorNatural color spectrum (meadows, hills, etc.) can be separately set.
GammaSets the gradation curve according to the output of the picture signal i\
n 
relation to the input signal.
*   Depending on input signal or other picture settings, the range of detail\
ed items for 
adjustment may differ.
Expert Control
ItemDescription
Dynamic 
Contrast
Adjusts contrast and color to the optimal level according to the 
screen’s brightness.
Color GamutSelects the range of colors that can be expressed.
 y Standard:  Displays the original colors of an input signal regardless 
of the display features.
 y Wide: Makes use of the display's rich colors.
Edge  
Enhancer
Shows clearer and distinctive yet natural edges of the video.
Expert  
Pattern
Patterns used for expert adjustment.
Color FilterFilters a specific color spectrum in RGB colors to fine-tune color 
saturation and hue accurately.  
						

							62CUSTOMIZING SETTINGS 
ItemDescription
Color  
Temperature
In Expert mode, you can customize the options of each mode.
Gamma: Select 1.9, 2.2, or 2.4.
a.  Method: 2 Points 
- Pattern: Inner, Outer 
- Points: Low, High 
-  Red/Green/Blue: Adjustable  range -50 to +50.
- Apply to all inputs:  The values of the Color Temperature is 
applied to all the input modes.
b.   Method: 20 Point IRE 
- Pattern: Inner, Outer 
-  IRE (Institute of Radio Engineers) is the unit indicating the size 
of a video signal and can be set to 0, 5, 10, 15, ... 100. You can  
fine-tune for each setting as shown below.
- Luminance: The adjustment range is 50 to 500.
- Red/Green/Blue: The adjustment range is -50 to +50.
- Apply to all inputs:   
The values of the Color Temperature is 
applied to all the input modes.
Color  
Management 
System
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an 
expert to adjust the tint using a test pattern. Six colors (Red/Green/
Blue/Cyan/Magenta/Yellow) can be selectively adjusted without 
affecting other colors. You may not see colors change on a normal 
picture even after adjustment.
-  Saturation Red/Green/Blue/Yellow/Cyan/Magenta,  
Tint Red/Green/Blue/Yellow/Cyan/Magenta,  
Luminance Red/Green/Blue/Yellow/Cyan/Magenta: 
The adjustment range is -30 to +30 each.
*   Depending on input signal or other picture settings, the range of detail\
ed items for 
adjustment may differ.  
						

							63CUSTOMIZING SETTINGS 
Picture Option
ItemDescription
Noise  
Reduction
Reduces screen noise in the video.
MPEG Noise 
Reduction
Eliminates noise generated while creating digital picture signals.
Black LevelAdjusts the brightness or darkness of the screen to suit the black level\
 of 
the picture input using the degree of darkness (black level) of the sc\
reen.
Real CinemaOptimizes the screen for movie viewing.
Color  
Temperature
Adjusts the overall color of the screen to suit your preference.
Select Warm, Cool, Medium, or Natural.  
						

							64CUSTOMIZING SETTINGS 
AUDIO Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select AUDIO 
and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available sound settings are described as follows.
ItemDescription
Sound ModeSets the sound mode.
Mode
StandardSuitable for all types of video.
News/ Music/ 
Cinema/ Sport/ 
Game
Sets audio optimized for a specific genre.
Sound EffectThe user can select various sound effects. 
Mode
Clear Voice IIMakes the voice from the projector crisp and clear.
Virtual  
Surround
LG’s proprietary audio processing technology 
allows 5 channel-like surround sound from two 
speakers.
 yWhen Clear Voice II is set to on, Virtual 
Surround cannot be selected. 
EqualizerAdjusts the volume to a level of your choice using 
the Equalizer. 
 yAudio-band (100 Hz/ 300 Hz/ 1 kHz/ 3 kHz/  
10 kHz) can be adjusted from - 10 to 10.
 yReset: Resets voice options that the user has 
changed. 
BalanceAdjusts the balance of the left and right speakers.
ResetInitialize the applied effect under the Sound 
Effect menu. 
Auto VolumeAutomatically adjusts the volume level.
002400380027002C00321BD20003
y
y 00360052005800510047000300300052004700480003
000300030003000300030003000300030003000300030003001D000300360057004400510047004400550047
y
y 003600520058005100470003002800490049004800460057
y
y 0024005800570052000300390052004F0058005000480003
0003000300030003000300030003
00030003000300030003001D0003003200490049    
						

							65CUSTOMIZING SETTINGS 
CHANNEL Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select 
CHANNEL and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-  
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available channel settings are described as follows.
ItemDescription
Auto  
Tuning
Remembers a channel which is currently broadcasting. You should use 
this function when you move to another house or move the Projector to 
other place. It must be used while the antenna is connected and there 
are channel broadcasting signals.
 yChannels are not registered properly unless the antenna/cable is 
connected correctly.
 yAuto Tuning only finds programs that are currently broadcasting.
 yIf Lock System is turned On, a pop-up window will appear asking 
for password.
Manual 
Tuning
Adjusts channels manually and saves the results. 
For digital broadcasting, signal strength, etc. can be checked. 
Channel 
Edit
Edits the saved channels. 
Set as favorite channel, block/unblock channel, delete channel etc. of 
the selected channel.
0026002B0024003100310028002F1BD20003
y
y 00240058005700520003003700580051004C0051004A
y
y 00300044005100580044004F0003003700580051004C0051004A
y
y 0026004B0044005100510048004F     
						

							66CUSTOMIZING SETTINGS 
TIME Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select TIME  
and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available time settings are described as follows.
ItemDescription
ClockChecks or changes the time while watching projector.
Mode
AutoSynchronizes the projector clock to the digital time 
information sent by the TV station.
ManualSets the time and date manually if the auto setup does not 
correspond to the current time.
Off Time
/On Time
Sets the time to turn on or off the projector automatically. To use this 
feature, you should set the current time and date in advance.
To use this feature, set the time correctly.
If you do not want to set Off Time/On Time, select Off in Repeat.
 NOTE
 yIf you set both Off time and On time features to the same time, 
the Off time feature overrides the On time feature.
 yIf you do not press any button within two hours after the projector 
is turned on by the On Time feature, the projector enters standby 
mode automatically.
Sleep TimerTurns off the Projector after a preset number of minutes.
To cancel the Sleep Timer, select Off.
Auto OffIf there is no input signal or button press, the projector automatically\
 
turns off after the preset time has elapsed.
Automatic 
Standby
Turns off the projector automatically after a set period of time if there is 
no button input on the projector.
0037002C003000281BD20003
y
y 0026004F00520046004E
y
y 00320049004900030037004C00500048
0003000300030003000300030003000300030003000300030003001D0003003200490049
y
y 0032005100030037004C005000480003
000300030003000300030003000300030003000300030003001D0003003200490049
y
y 0036004F00480048005300030037004C0050004800550003
000300030003000300030003000300030003000300030003001D0003003200490049
y
y 0024005800570052
00030032004900490003 000300030003000300030003000300030003000300030003001D00030019001300030050004C00510011
y
y 0024005800570052005000440057004C00460003003600570044005100470045005C0003000300030003001D0003003200490049    
						

							67CUSTOMIZING SETTINGS 
WIRELESS Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select 
WIRELESS and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available wireless settings are described as follows.
ItemDescription
SCREEN 
SHARE
The SCREEN SHARE displays the screen of the connected device.
 yYou can check the SCREEN SHARE's ID.
Mode
GroupThis is the Group setting for each device supporting the 
SCREEN SHARE feature. When the wireless connection 
is weak or unstable, adjust the Group setting to correct 
the problem.
ChannelYou can change the channel used for wireless 
connections.
 ySearch Channels: Select channel searching methods.
-  Auto: The projector searches for available channels 
and automatically selects the least used channel.
- Manual: You can select a channel manually.
 yChannel: This is shown when Search Channels is set 
to Manual. It allows you to specify a channel number 
to use.
003A002C00350028002F0028003600361BD20003
y
y 00360026003500280028003100030036002B00240035002800030003000300030003001D0003003E0033002D003700350040003E002F002A00400033003A001B00130013003E00130013001300130040
y
y 002A0055005200580053
y
y 0026004B0044005100510048004F    
						

							68CUSTOMIZING SETTINGS 
LOCK Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select LOCK 
and press the OK button. 
-  
To enter the LOCK menu, enter the preset 
4-digit password. The initial password is set 
as 0000.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-  
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available lock settings are described as follows.
ItemDescription
Set PasswordSets or changes projector password.
 yThe initial password is set as 0000.
Lock SystemLocks the selected channel or external input. 
First set Lock System to On. 
Item
Block 
Channel
Blocks the programs that contain inappropriate 
contents for children. The programs can be selected 
but the screen is blank and the audio is muted. To 
watch a locked program, enter the password.
Movie  
Rating
Blocks the movies that are only broadcasted on the 
TV and contain inappropriate contents, based on the 
Motion Picture Association of America (MPAA) rating.
 yG : General audiences  
All ages admitted
 yPG : Parental guidance suggested  
Some material may not be suitable for children
 yPG-13 : Parents strongly cautioned  
Some material may be inappropriate for children 
under 13
 yR : Restricted Under 17 requires accompanying 
parent or adult guardian
 yNC-17 : No one 17 and under admitted
 yX : Adult only
002F00320026002E1BD20003
y
y 00360048005700030033004400560056005A005200550047
y
y 002F00520046004E00030036005C00560057004800500003
000300030003001D0003003200490049
y
y 0025004F00520046004E00030026004B0044005100510048004F
y
y 003000520059004C00480003003500440057004C0051004Ay
y 003700390003003500440057004C0051004A00100026004B004C004F0047005500480051
y
y 003700390003003500440057004C0051004A0010002A00480051004800550044004F
y
y 00270052005A0051004F00520044004700440045004F00480003003500440057004C0051004A    
						

							69CUSTOMIZING SETTINGS 
ItemDescription
Lock SystemItem
TV 
Rating-
Children
Blocks the children’s TV programs that parents do 
not want their children to watch. To block other TV 
programs, you should set the TV Rating-General 
feature.
 yAge TV-Y (All children, including children from 
ages 2-6), TV-Y7 (Directed to older children, 
suitable for children age 6 and above)
 yFantasy Violence TY-Y7 (Directed to older 
children - Fantasy violence, suitable for children 
age 6 and above, containing more intense or 
combative fantasy violence)
TV 
Rating-
General
Blocks the TV programs that you want based on 
the ratings by using the Parental Control Function 
(V-Chip).
The V-Chip electronically reads TV program ratings 
and allows parents to block program that are 
unsuitable for children.
 yAge TV-G (General audience, suitable for all ages) 
TV-PG (Parental guidance suggested, containing 
material that are unsuitable for younger children) 
TV-14 (Parents strongly cautioned, containing 
material that are unsuitable for children age 14 and 
under)  
TV-MA (Mature audience only, unsuitable for 
children age)
 yDialogue (suggestive dialogue) TV-PG or TV-14
 yLanguage (coarse language)TV-PG, TV-14, or TV-MA
 ySex (sexual situation) TV-PG, TV-14, or TV-MA
 yViolence TV-PG, TV-14, or TV-MA
Down-
loadable 
Rating
This function operates only when TV has received 
Region5 Rating data. The name of the rating option 
may differ.
Input 
BlockBlock the input sources.  
						

							70CUSTOMIZING SETTINGS 
ItemDescription
Key LockLocks control buttons on projector. 
 yKey Lock function remains intact even in case of power outage 
or when the power cord is removed from the wall socket. 
 yKey Lock function can only be set by remote control, and not 
by the button on the projector. 
 yIf you select On: You can turn the projector on only with the 
Power button if you have turned the projector off using the 
remote control. If you press a button on the joystick button 
while watching video, the message Key Lock is displayed.