LG Projector Minibeam PW800 User Manual

							www.lg.com
Owner's Manual
LG Minibeam
DLP Projector
PW800
Please read the safety information carefully before using the product. 
						

							2LICENSE 
LICENSE
Supported licenses may differ by model. For more information about licenses,  
visit www.lg.com.
Manufactured under license from Dolby Laboratories. 
Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
This DivX Certified® device has passed rigorous testing to 
ensure it plays DivX® video.
To play purchased DivX movies, first register your device at 
vod.divx.com. Find your registration code in the DivX VOD 
section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including 
premium content.
DivX®, DivX Certified® and associated logos are trademarks 
of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents:  
7,295,673; 7,460,668; 7,515,710; 7,519,274.
The terms HDMI and HDMI High-Definition Multimedia 
Interface, and the HDMI logo are trademarks or registered 
trademarks of HDMI Licensing LLC in the United States and 
other countries.
 NOTE
 yImage shown may differ from your projector.
 yYour projector’s OSD (On Screen Display) may differ slightly from that shown in 
this manual.
This device meets the EMC requirements for home appliances (Class B) a\
nd is 
intended for home usage. This device can be used in all regions.  
						

							3SAFETY INSTRUCTIONS 
SAFETY INSTRUCTIONS
Please take note of the safety instructions to prevent any potential acc\
ident or misuse 
of the projector.
 y Safety precautions are given in two forms, i.e. WARNING and CAUTION as detailed 
below.
 WARNING  Failure to follow the instructions may cause serious injury and even dea\
th. 
 CAUTION  Failure to follow the instructions may cause injury to persons or damage\
 to 
the product.
 yRead the owner's manual carefully and keep it on hand.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPENThe lightning flash with 
arrowhead symbol, within 
an equilateral triangle, is 
intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product’s enclosure 
that may be of sufficient magnitude to 
constitute a risk of electric shock to 
persons.
WARNING/CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN
The exclamation point within 
an equilateral triangle is 
intended to alert the user to 
the presence of important 
operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.
WARNING/CAUTION
-  TO REDUCE THE RISK OF FIRE 
AND ELECTRIC SHOCK, DO NOT 
EXPOSE THIS PRODUCT TO RAIN 
OR MOISTURE.  
						

							4SAFETY INSTRUCTIONS 
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
 WARNING
 yDo not use the projector outside and 
do not expose the product to any 
humidity or water.  
-  Since the product is not waterproof, 
this may result in a fire or electric 
shock.
 yDo not place the projector in direct 
sunlight or near heat sources such as 
radiators, fires, stoves, etc. 
- This may result in fire.
 yDo not place flammable materials 
such as aerosols near the projector. 
- This may result in fire.
 yDo not allow children to cling to or 
climb up to the projector. 
-  This may cause the projector to fall, 
causing injury or death.
 yDo not install the product in a place with 
no ventilation (e.g., on a bookshelf or in 
a closet) or on a carpet or cushion. 
-  This may result in fire due to the 
increase in internal temperature.
 yDo not place the product close to 
sources of steam, oil or oil mist, such 
as humidifiers and kitchen counters. 
-   Failure to do so may result in fire, 
electric shock, or corrosion.
 yDo not install the product onto a wall 
or ceiling that is close to sources of 
oil or oil mist. 
-  
The product may be damaged and 
fall, resulting in serious injury.
 yDo not place the projector where it 
might be exposed to dust. 
-  This may result in fire.
 yDo not use the projector in a damp 
place such as a bathroom where it is 
likely to get wet. 
-  This may result in fire or electric 
shock.
 yDo not allow a tablecloth or curtain to 
block the air vent. 
-  This may result in fire due to the 
increase in the internal temperature.
 yEnsure good ventilation around the 
projector. The distance between the 
projector and the wall should be at 
least 30 cm. 
-  This will prevent fire due to the 
increase in the internal temperature.
 CAUTION
 yWhen placing the projector on a table 
or shelf, be careful not to put it near 
the edge. 
-  The projector could fall due to 
balance problems, which may 
cause personal injury or damage to 
the product. Make sure to use the 
projector cabinet or stand that fits the 
projector.
 yWhen moving the projector, make 
sure to switch it off and remove the 
power plug and cords. 
-  The power cord may be damaged, 
resulting in fire or electric shock.
 yDo not place the projector on an 
unstable or vibrating surface such as 
a wobbly shelf or a slope. 
-  It may fall and cause injury.  
						

							5SAFETY INSTRUCTIONS 
 yBe careful not to tip the projector over 
when connecting external devices to 
the projector. 
-  This may cause personal injury or 
damage to the projector.
Power
 WARNING
 yThe appliance coupler is used as the 
disconnect device.  
-  Please make sure the device is 
installed near the wall outlet to which 
it is connected and that the outlet is 
easily accessible.
 yThe grounding wire should be 
connected. 
-  Ensure that you connect the 
grounding cable to avoid electric 
shock. 
If it is not possible to ground the unit, 
have a qualified electrician install a 
separate circuit breaker. 
Do not try to ground the projector 
by connecting it to telephone wires, 
lightning rods, or gas pipes.
 yThe power plug should be inserted 
fully into the power outlet. 
-  An unstable connection may cause 
a fire.
 yDo not place heavy objects on the 
power cord. 
-  This may result in fire or electric 
shock.
 yNever touch the power plug with wet 
hands. 
-  This may result in electric shock.
 yDo not plug too many devices into 
one multi-power outlet. 
-  This may result in fire due to the 
power outlet overheating.
 yKeep the AC adapter, power plug, 
and the used power outlet clean from 
dust or foreign materials building up. 
-   
This may result in fire.
 yIf there is any smoke or a burning 
smell from the projector or AC 
adapter, stop using the product 
immediately. Disconnect the power 
cord from the power outlet, and then 
contact the customer service center. 
-  
This may result in fire.
 yTo turn off the main power, remove 
the power plug, which should be 
positioned so it is easy to access for 
operation.
 CAUTION
 yAlways grab the plug to remove the 
AC adapter or power cord. 
-   Otherwise, this may result in a fire 
or may damage the product.
 yRefrain from constantly bending the 
power cord of the AC adapter. 
-  If the power cord is bent excessively 
for a long period of time, the cord 
may break inside. This may result in 
a fire or electric shock.
 yEnsure the power cord and plug are 
not damaged, modified, severely 
bent, twisted, pulled, sandwiched 
or hot. Do not use the product if the 
power outlet is loose. 
-  This may result in fire or electric shock.
 yKeep the power cord away from heating 
devices. 
-  The wire's sheath may melt, which 
may result in fire or electric shock.
 yPlace the projector where people will 
not trip over or step on the power 
cord to protect the power cord and 
plug from any damage. 
-  This may result in fire or electric shock.  
						

							6SAFETY INSTRUCTIONS 
 yDo not turn the projector on or off 
by plugging in the power plug or 
unplugging it from the power outlet.  
(Do not use the power plug as a switch.) 
-  This may result in electric shock or 
damage to the product.
 yDo not insert a conductor into the other 
side of the wall outlet while the power 
plug is inserted into the wall outlet.  
In addition, do not touch the power 
plug immediately after it is disconnected 
from the wall outlet. 
- This may result in electric shock.
 yOnly use the official power cord 
provided by LG Electronics. Do not 
use other power cords. 
-  
This may result in fire or electric 
shock.
 yIf any water or foreign materials have 
gone into the AC adapter, power cord, 
or the interior of the projector, turn off 
the projector by pressing the power 
button. Remove all the cables, and 
then contact the customer service 
center. 
-  
This may result in fire or electric 
shock.
 yThe surface of the AC adapter is 
hot. Keep the AC adapter out of the 
reach of children and avoid touching 
it during use.
 yNever disassemble the power supply 
devices (AC adapter/power cord, 
etc.). 
-  
This may damage the power cord 
and result in a fire or electric shock.
 yConnect the AC adapter and the 
power cord firmly. 
-   Not doing so may result in a product 
failure or fire.
 yDo not place heavy objects or put 
pressure on the power cord and AC 
adapter and avoid damage. 
-  
This may result in a fire or may 
damage the product.
 yAlways use the AC adapter provided 
or any AC adapters approved and 
certified by LG Electronics. 
-  
Any other AC adapter connected 
may result in the screen flickering.
When in Use
 WARNING
 yDo not place anything containing 
liquid on top of the projector such as 
a vase, flower pot, cup, cosmetics, 
medicine, or ornaments, candles, etc. 
-  This may result in fire or electric 
shock, or cause injury due to falling.
 yIn the event that there is a heavy 
impact or the cabinet is damaged, 
switch it off, unplug it from the power 
outlet and contact an authorized 
service center. 
-  This may result in electric shock.
 yDo not insert pieces of metal such as 
coins, hairpins, or metal debris, nor 
flammable materials such as paper or 
matches into the projector. 
-  This is to prevent electric shock or fire.
 yMake sure that a child does not 
swallow the batteries when you 
replace the old remote control 
batteries with new ones. Keep 
batteries out of reach of children. 
-  If a child swallows a battery, consult 
a doctor immediately.  
						

							7SAFETY INSTRUCTIONS 
 yNever open any cover on the 
projector.  
-  
There is a high risk of electric shock.
 yDo not look directly into the lens when 
the projector is in use. 
-  The bright light may damage your 
eyes.
 yWhen the lamp is on or has just been 
turned off, avoid touching the air vent 
or lamp, because these will be very 
hot.
 yIf there is a gas leak in the room with 
the projector, do not touch the projector 
or power outlet. Open the windows 
for ventilation. 
-  Sparks may cause fire or  burns.
 yUnplug the power cord from the outlet 
during a lightning storm.  
-  This will prevent shock or damage 
to the projector.
 yDo not use the projector near 
electronic devices that generate a 
strong magnetic field.
 yKeep the plastic film used for 
packaging the projector out of the 
reach of children. 
-   If not handled safely, it can cause 
suffocation.
 yDo not keep your hand on the projector 
for a long time when it is running.
 yWhen you play a game by connecting 
a game console to a projector, it is 
recommended that you maintain a 
distance of more than four times the 
diagonal length of the screen.  
-  Make sure that the connecting cable is 
long enough. Otherwise, the product 
may fall causing personal injury or 
damage to the product. 
 yDo not place the projector or its 
remote control with battery in 
an extremely high temperature 
environment. 
- This may result in fire.
 yDo not use 3D glasses if you do not 
watch 3D.
 CAUTION
 yDo not place heavy objects on the 
projector. 
-  It may fall down and cause personal 
injury.
 yBe careful not to allow any impact to 
the lens during transport.
 yDo not touch the lens of the projector.  
- The lens may be damaged.
 yDo not use any sharp tools on the 
projector such as a knife or hammer, 
because this may damage the casing.
 yIn the event that no image appears 
on the screen or no sound is heard, 
stop using the projector. Switch off 
the projector, unplug it from the power 
outlet, and contact our service center. 
-  
This may result in fire or electric 
shock.
 yDo not drop anything onto the 
projector or allow anything to bang 
into the projector. 
-  
This may cause damage to the 
projector or personal injury.
 yIt is recommended that you maintain 
a distance of more than 5 to 7 times 
the diagonal length of the screen. 
-   If you watch the screen at a close 
distance for a long time, your eye 
sight may become worse.  
						

							8SAFETY INSTRUCTIONS 
 yDo not block the light beam emitted 
from the projector using a book or 
other object. 
-  Lengthy exposure to the projector 
beam may result in fire. In addition, 
the lens may be overheated and 
damaged by the reflected heat. 
 yDo not start the projector with the 
volume turned up high. 
- High volume may damage hearing.
 yDo not use high voltage electrical 
equipment near the projector, (e.g., 
a bug zapper). This may result in 
product malfunction.
Cleaning
 WARNING
 yDo not spray the projector with water 
when cleaning. Make sure water does 
not flow into the projector. 
-  This may result in fire or electric 
shock.
 yWhen there is smoke or a strange 
smell coming out from the projector or 
a foreign object falls into the pro  jector, 
switch it off and unplug it from the 
power outlet and contact our service 
center.  
-  Otherwise, this may result in fire or 
electric shock.
 yUse air spray, a soft cloth, or a cotton 
swab moistened with a lens cleaning 
chemical or alcohol to remove dust or 
stains on the front projection lens.
 CAUTION
 yContact your seller or our service 
center once a year to clean the 
internal parts of the projector. 
-  If you do not clean the projector 
for a long period of time, dust will 
accumulate, which may result in fire 
or damage to the projector.
 yWhen cleaning plastic parts such 
as the projector case, unplug the 
power first and wipe with a soft cloth. 
Do not spray with water or wipe with a 
wet cloth. Never use glass cleaner, 
automobile or industrial polish, 
abrasives, wax, benzene, or alcohol 
as these can damage the projector. 
-  This can result in fire, electric shock, 
or cause damage to the product 
(deformation and corrosion).
 yRemove the plug from the outlet 
before cleaning the product. 
-  Otherwise, this may result in electric 
shock.  
						

							9SAFETY INSTRUCTIONS 
Others
 WARNING
 ySome users may experience a 
seizure or other abnormal symptoms 
when they are exposed to a flashing 
light or particular patterns from a 
video game.
 yWhen you go out, place the projector 
out of reach of animals, and remove 
the power plug from the wall outlet. 
-  Using a damaged power cord may 
result in short circuit or fire.
 yDo not use the projector near high-
precision electronic devices or those 
that transmit weak radio signal. 
-  
This may affect the operation of the 
product, causing an accident.
 yOnly a qualified technician can 
disassemble or modify the projector. 
For diagnosis, adjustment, or repair, 
contact your seller or our service 
center. 
-  This may result in fire or electric 
shock.
 yProper ventilation required, do not 
block airflow around unit. Doing 
so can cause injury and internal 
overheating.
 yTo prevent damage to lamp, unit must 
remain plugged in for approximately  
3 minutes after power down to allow 
for proper cool down (not applicable 
on LED models).
 yDo not touch the lens; doing so can 
result in burns or damage to lens. 
Lens and unit may be HOT during 
and immediately after use. Use 
caution when handling unit, allowing 
for proper cool down.
 yOnly use a grounded electrical outlet.
 yDo not insert anything into or cover 
up the exhaust vents.  
-  This may result in fire or electric 
shock.
 yFollow all maintenance guidelines 
for optimal use; service only at an 
authorized service center.
 yLamp contains mercury and as such 
must be disposed of according to 
local, state, and federal laws (not 
applicable on LED models).
 yKeep the batteries and remote out of 
reach of children. 
-  
This will prevent personal injury or 
damage to the product.  
						

							10SAFETY INSTRUCTIONS 
 CAUTION
 yDo not use or store the projector 
outdoors for long periods of time.
 yDo not mix new batteries with old 
ones. 
-  Burst or leaking batteries may result 
in damage or injury.
 yBe sure to unplug if the projector is not 
to be used for a long period. 
-  Accumulated dust may result in fire 
or electric shock due to overheating, 
ignition, or poor insulation.
 yOnly use the specified type of battery. 
-  Burst or leaking batteries may result in 
damage or injury.
 yMake sure you use the same type of 
battery when replacing.  
-  In the case of a battery contact failure, 
the battery may drain quickly or the 
remote control may not work properly.
 yDispose of used batteries properly.  
-  This may result in explosion or fire. 
The correct method of disposal may 
vary depending on your country or 
region. Dispose of the battery pack as 
instructed.
 yDo not throw or disassemble the battery. 
-  This may result in fire or explosion 
due to damage to the battery.
 yStore batteries away from metallic 
objects, such as keys and paper clips. 
-  Excess current may cause a rapid 
increase in temperature, resulting in 
fire or burns.
 yDo not store the batteries near any 
heat source, such as a heater. 
-  
This may result in fire or damage to 
the product.
 yDo not store batteries at temperatures 
higher than 60 °C or in high humidity. 
- This may result in explosion or fire.
 yMake sure that the battery is installed 
correctly. 
- This prevent explosion or fire.
 yIncorrect battery replacement may 
cause fire.
Risk Group 2
CAUTION Possibly hazardous optical 
radiation emitted from this product. Do 
not 
stare at operating lamp. May be 
harmful to 
the eye.