LG Projector Minibeam PW800 User Manual
Here you can view all the pages of manual LG Projector Minibeam PW800 User Manual. The LG manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21PREPARATION
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or audio/video
source.
2 Place the projector an appropriate distance away from the screen. The distance
between the projector and the screen determines the actual size of the i\
mage.
3 Position the projector so that the lens is at a right angle to the scree\
n. If the
projector is not at a right angle, the projected image will look distort\
ed. To correct the
distortion, use the...](http://img.usermanuals.tech/thumb/47/99962/w300_projector_manual_8809_d-20.png "Page 21
21PREPARATION
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or audio/video
source.
2 Place the projector an appropriate distance away from the screen. The distance
between the projector and the screen determines the actual size of the i\
mage.
3 Position the projector so that the lens is at a right angle to the scree\
n. If the
projector is not at a right angle, the projected image will look distort\
ed. To correct the
distortion, use the...")
21PREPARATION Projection Distance per Screen Size 1 Place the projector on a sturdy, level surface, together with the PC or audio/video source. 2 Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the i\ mage. 3 Position the projector so that the lens is at a right angle to the scree\ n. If the projector is not at a right angle, the projected image will look distort\ ed. To correct the distortion, use the...
Page 22
![Page 22
22PREPARATION
How to Install the Projector On a Tripod
yYou can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
yWhen stabilizing the tripod, we recommend using a locking bolt of standa\
rd size
4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm.
(If it is longer than the maximum allowed size, it may damage the proje\
ctor.)
+0633
The projector is
connected to this part.Tripod
Bolt used to attach...](http://img.usermanuals.tech/thumb/47/99962/w300_projector_manual_8809_d-21.png "Page 22
22PREPARATION
How to Install the Projector On a Tripod
yYou can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
yWhen stabilizing the tripod, we recommend using a locking bolt of standa\
rd size
4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm.
(If it is longer than the maximum allowed size, it may damage the proje\
ctor.)
+0633
The projector is
connected to this part.Tripod
Bolt used to attach...")
22PREPARATION How to Install the Projector On a Tripod yYou can install this projector using a camera tripod. As shown below, you can mount the projector instead of a camera on the tripod. yWhen stabilizing the tripod, we recommend using a locking bolt of standa\ rd size 4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may damage the proje\ ctor.) +0633 The projector is connected to this part.Tripod Bolt used to attach...
Page 23
![Page 23
23PREPARATION
Caution when Using Pouch
The purpose of the pouch provided is to protect the exterior of the prod\
uct.
Please insert the back of the product first into the pouch as illustrated.
NOTE
yWhen using the product with the pouch on for a long period of time, the \
parts
exposed to direct sunlight may change colors.
yWhen using the product with the pouch on, the built-in speakers may soun\
d low in
volume.](http://img.usermanuals.tech/thumb/47/99962/w300_projector_manual_8809_d-22.png "Page 23
23PREPARATION
Caution when Using Pouch
The purpose of the pouch provided is to protect the exterior of the prod\
uct.
Please insert the back of the product first into the pouch as illustrated.
NOTE
yWhen using the product with the pouch on for a long period of time, the \
parts
exposed to direct sunlight may change colors.
yWhen using the product with the pouch on, the built-in speakers may soun\
d low in
volume.")
23PREPARATION Caution when Using Pouch The purpose of the pouch provided is to protect the exterior of the prod\ uct. Please insert the back of the product first into the pouch as illustrated. NOTE yWhen using the product with the pouch on for a long period of time, the \ parts exposed to direct sunlight may change colors. yWhen using the product with the pouch on, the built-in speakers may soun\ d low in volume.
Page 24
24REMOTE CONTROL #-/,3 5*0 REMOTE CONTROL Open the lid at the back of the remote control and insert the batteries as described in the instructions. Use new batteries and do not mix regular or rechargeable batteries. (1.5 V AAA) CAUTION yyDo not mix new batteries with old ones. POWER Turns the projector on or off. USB/MY MEDIA Accesses USB mode. BLANK Blanks the screen. RATIO Changes the aspect ratio of the screen per pressing of the button. ENERGY SAVINGReduces power consumption by adjusting peak...
Page 25
![Page 25
25REMOTE CONTROL
NOTE
yWhen using the remote control, the optimal operation range is
6 meters or less (left/right) and within a 30 degree arc of the
remote control IR receiver.
yIf a cable is connected to the back port, the optimal operating
range is 3 meters or less (left/right) and within a 30 degree
arc of the remote control IR receiver.
yFor seamless operation, do not block the IR receiver.
yWhen you carry the remote control in the portable bag, make sure that th\
e
buttons on the remote...](http://img.usermanuals.tech/thumb/47/99962/w300_projector_manual_8809_d-24.png "Page 25
25REMOTE CONTROL
NOTE
yWhen using the remote control, the optimal operation range is
6 meters or less (left/right) and within a 30 degree arc of the
remote control IR receiver.
yIf a cable is connected to the back port, the optimal operating
range is 3 meters or less (left/right) and within a 30 degree
arc of the remote control IR receiver.
yFor seamless operation, do not block the IR receiver.
yWhen you carry the remote control in the portable bag, make sure that th\
e
buttons on the remote...")
25REMOTE CONTROL NOTE yWhen using the remote control, the optimal operation range is 6 meters or less (left/right) and within a 30 degree arc of the remote control IR receiver. yIf a cable is connected to the back port, the optimal operating range is 3 meters or less (left/right) and within a 30 degree arc of the remote control IR receiver. yFor seamless operation, do not block the IR receiver. yWhen you carry the remote control in the portable bag, make sure that th\ e buttons on the remote...
Page 26
26USING THE PROJECTOR USING THE PROJECTOR Connecting to an Antenna or Cable To watch TV using an indoor/outdoor antenna, connect a wall terminal and the antenna port of the Projector using an RF cable (75 Ω). You can watch terrestrial or cable (analog or digital) TV. (The RF cable is sold separately.) NOTE y Make sure not to bend the copper wire of the RF cable (75 Ω). Turn the input jack to the right to fasten it. Copper wire y Ensure you use a standard coaxial cable (75 Ω, sold...
Page 27
27USING THE PROJECTOR Watching Projector Turning on the Projector The menu screen display in this owner's manual is an example to help users understand how to operate the product and may look different from the actual screen. 1 Connect the power cord correctly. 2 After waiting for a moment, press the POWER button on the remote control or the joystick button. 3 In the Language Selection screen, select a language. 003A0028002F002600320030002800040037004B00440051004E0003 00360057 English Español...
Page 28
![Page 28
28USING THE PROJECTOR
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the screen
properly.
Adjust the focus of the image by rotating the Focus Ring to the left or \
right.
Make sure the product does not move when adjusting the focus.
Focus Ring
Watching Projector
1 In standby mode, press the POWER button to turn the projector on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while...](http://img.usermanuals.tech/thumb/47/99962/w300_projector_manual_8809_d-27.png "Page 28
28USING THE PROJECTOR
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the screen
properly.
Adjust the focus of the image by rotating the Focus Ring to the left or \
right.
Make sure the product does not move when adjusting the focus.
Focus Ring
Watching Projector
1 In standby mode, press the POWER button to turn the projector on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while...")
28USING THE PROJECTOR Focus of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. Adjust the focus of the image by rotating the Focus Ring to the left or \ right. Make sure the product does not move when adjusting the focus. Focus Ring Watching Projector 1 In standby mode, press the POWER button to turn the projector on. 2 Press the INPUT button and select the input signal you want. 3 Control the projector using the following buttons while...
Page 29
29USING THE PROJECTOR To Set Channel Image shown may differ from your projector. Memorizing the Available Channels Using the Auto Tuning function Saves a channel which is currently broadcasting. Be sure to activate Auto Tuning when you move to a new home or change the position of your projector. When you activate this function, make sure that the antenna is connected and there are channels broadcasting signals. 1 Press the SETTINGS button. 2 Press the , , , or button to select CHANNEL and press...
Page 30
30USING THE PROJECTOR Editing Your Channel List 1 Press the SETTINGS button. 2 Press the , , , or button to select CHANNEL and press the OK button. 3 Press the or button to select Channel Edit and press the OK button. 4 Edit channels using the following buttons. 0026004B0044005100510048004F0003002400510057004800510051004400330044004A00480003 001600100014 001800100014001A00100014 002700370039 00370039002600440045004F00480003 002600440045004F00480003 0003002400470047001200270048004F0048005700480003...