LG Projector Minibeam Pro User Manual
Have a look at the manual LG Projector Minibeam Pro User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51ENTERTAINMENT To use MY APPS • (Home) → MY APPS • Select MY APPS at the lower right of the home screen. • Check pre-installed apps and apps you have downloaded. To edit items in MY APPS • Select (Home) → MY APPS → (Edit). • On the MY APPS page, select (Edit) at the top of the screen to move or delete apps. Please note that system apps can be moved, but cannot be deleted. • Changes orders / deletes items by dragging the app icons if your device has a Magic Remote Control.
52ENTERTAINMENT To Connect Network A wireless or wired network connection is required to use smart features\ . When connected to the network, you can use premium content, LG Smart World, DLNA and more. One-click Network Connection Connects easily to a wired/wireless network. • (Home) → SETTINGS → NETWORK → Network Connection to connect to an available network automatically. Follow the prompts on the\ projector. To Connect to a Network Through Set Expert For use in special circumstances such as in offices (in cases where a static IP is used). • Select (Home) → SETTINGS → NETWORK → Network Connection → Start Connection (→ Other Network List) → Manual Setup. 1 Select a Network Connection, either Wired or Wireless. 2 When connecting via Wi-Fi, use the one of the following network connection methods. ItemDescription AP ListConnects to the network selected from the AP List. Enter the SSIDConnects to the wireless AP typed in. WPS-PBCConnects easily when the button of a wireless AP supporting PBC is pressed. WPS-PINConnects easily when the PIN of the wireless AP that you wish to connect to is entered in to the AP website.
53ENTERTAINMENT To Use the Wi-Fi Direct Function Wi-Fi Direct is a function that allows your projector to connect with a \ Wi-Fi Direct device without Internet connection. With SmartShare™, you can watch the files stored on a device connected via Wi-Fi Direct. • Select (Home) → SETTINGS → NETWORK → Wi-Fi Direct. 1 Set Wi-Fi Direct to On. (If you do not use it, please change it to Off.) 2 Enable the Wi-Fi Direct settings on the device to which you want to connect. 3 A list of devices that can be connected to the projector is displayed. 4 Select a device to connect. 5 Select Yes when the connection request message appears. 6 If the device that you want to connect accepts the request, Wi-Fi Direct is connected.
54ENTERTAINMENT Tips for Network Settings • Use a standard LAN cable (Cat5 or higher with RJ45 connector, 10 Base-T or 100 Base TX LAN port). • Resetting your modem can cause network connection problems. To resolve the problem, turn the power off, disconnect and reconnect, and then turn the power back on. • LG Electronics is not responsible for any network connection problems or any faults, malfunctions and errors caused by an network connection. • A network connection may not work properly depending on the Internet service provider. • A DSL modem is required for a DSL service; a cable modem is required for a cable service. Only a limited number of network connections may be available, and projector network setting may not be available depending on your contract with your Internet Service Provider (ISP.) (If only one device is allowed per line and the PC is already connected\ , other devices cannot be used.) • Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices, or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as other Wi-Fi devices. • The surrounding wireless environment can cause the wireless network service to run slowly. • If you do not turn off the entire local home network, network traffic ma\ y occur on some devices. • For an AP connection, an access point device that supports wireless connection is required and the wireless connection feature must be enabled on the device. Contact your service provider regarding availability of wireless connection on your access point. • Check the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation for SSID and security settings of the AP. • Invalid settings on network devices (wired/wireless line sharer, hub) can cause the projector to run slowly or not operate properly. Install the devices correctly according to the appropriate manual and set the network. • Connection method may differ according to the AP manufacturer.
55SMARTSHARE SMARTSHARE Smartshare is the name of contents sharing and usage function that includes USB Connection, SCREEN SHARE (Miracast™, Intel’s WiDi),\ DLNA and others. Before Using Connecting a USB Device Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below. USB flash Drive Removing a USB Device 1 Select (Home) → MY APPS → Quick Menu. 2 Use the or button to move to USB Device and press the Wheel (OK) button. 3 Select a USB to remove. Wait for confirmation that the USB device has stopped before removing the USB.  • If detached early, an error may occur on the projector or the USB storage device. • Once a USB device has been selected for removal, it can no longer be read. Remove the USB storage device and then re-connect it. NOTE
56SMARTSHARE Tips for using a USB device • If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. • Some USB storage devices may not work or may work incorrectly. • If you use a USB extension cable, the USB device may not be recognized or may not work properly. • Use only USB storage devices formatted with the Windows FAT32 or NTFS file system. • For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA. • It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supplied is not enough, the USB storage device may not be detected properly.) • It is recommended that you use USB flash drives of 32 GB or less and USB HDDs of 2 TB or less. • If a USB HDD with power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of the USB HDD. • Data in USB storage device can be damaged so be sure to back up important files to other devices. Data maintenance is the user's responsibility and the manufacturer is not responsible for data loss.
57SMARTSHARE To use SmartShare™ 1 Press the (Home) button on the magic remote control. 2 Select SMARTSHARE™. You can watch the photo, music, video, and document on the projector by connecting a USB or home network (DLNA). The photo, music, video, and document files of all devices connected to the projector are displayed. (For the document files, only those in the devices connected via USB are displayed.) 000001002003 004 005 006007008 009 010 011 2 1 Description 1 Displays photo/music/video files on all devices connected to the Projector. 2 Shows how to connect PC, smartphone/device, and USB.
58SMARTSHARE Watching the Videos In the Videos, you can watch movies stored on the connected USB device. Controls playback and sets options while viewing videos. Playing video - warning • Some subtitles created by users may not work properly. • The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have t\ he same name. • Subtitles on an NAS (Network Attached Storage) device may not be supported depending on the manufacturer and model. • We do not support any stream that contains GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation). • Only H.264 / AVC profile level 4.1 and lower is supported. • The file size limit is dependent on the encoding environment. • It works only the above version of Window Media Audio V2. • It’s not supported AAC Main Profile. • Video files created by some encoders may not be played back. • Video files in formats other than the ones specified here may not be played back. • Playback of video files stored on the USB device that do not support High Speed may not work properly. • The projector supports DTS audio codec when the USB / HDMI video file playback.
59SMARTSHARE To control video playback You can control playback using the following buttons. Shows the current playing position. Use the or button to move forward or backward. ItemDescription Resumes normal playback. Pauses the video player. Displays in slow motion. Whenever this button is pressed, the playback speed is increased or decreased by one unit. Plays the previous/next file. OptionSets the option.
60SMARTSHARE Viewing the Photos You can view photos stored on a connected device. To control photo view You can control playback using the following buttons. ItemDescription , Selects the previous or next photo. If no picture is selected, all photos in the current folder are displayed in a slide show. If some photos are selected, those photos are displayed in a slide show. • Set Slide Show Speed in the Option → Set Photo View. menu. You can listen to music while viewing full-size photos. • Set BGM in the Option → Set Photo View. menu. Rotates photos. • Rotates a photo 90°, 180°, 270°, 360° clockwise. • Photos cannot be rotated if their width is greater than the height of the maximum supported resolution. Enlarges or reduces the photo. Use the Up/Down/Left/Right buttons to select a page and press the Wheel (OK) button. OptionA setting popup window will appear.