LG Lucid User Guide

							199Safety
11. What about wireless phone interference with medical 
equipment?
Radio Frequency (RF) energy from wireless phones can interact with some 
electronic devices. For this reason, the FDA helped develop a detailed 
test method to measure Electro Magnetic Interference (EMI) of implanted 
cardiac pacemakers and defibrillators from wireless telephones. This test 
method is now part of a standard sponsored by the Association for the 
Advancement of Medical Instrumentation (AAMI). The final draft, a joint 
effort by the FDA, medical device manufacturers, and many other groups, 
was completed in late 2000. This standard will allow manufacturers to 
ensure that cardiac pacemakers and defibrillators are safe from wireless 
phone EMI.
The FDA has tested hearing aids for interference from handheld wireless 
phones and helped develop a voluntary standard sponsored by the Institute 
of Electrical and Electronic Engineers (IEEE). This standard specifies test 
methods and performance requirements for hearing aids and wireless 
phones so that no interference occurs when a person uses a “compatible” 
phone and a “compatible” hearing aid at the same time. This standard was 
approved by the IEEE in 2000. 
The FDA continues to monitor the use of wireless phones for possible 
interactions with other medical devices. Should harmful interference be 
found to occur, the FDA will conduct testing to assess the interference and 
work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
FDA web page on wireless phones (http://www.fda.gov), under “C” in the 
subject index, select Cell Phones > Research.
Federal Communications Commission (FCC) RF Safety Program (http://
www.fcc.gov/oet/rfsafety/)
International Commission on Nonlonizing Radiation Protection (http://www.
icnirp.de) 
						

							200Safety
World Health Organization (WHO) International EMF Project (http://www.
who.int/emf)
Health Protection Agency (http://www.hpa.org.uk/)
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to communicate by voice 
almost anywhere, anytime. An important responsibility accompanies the 
benefits of wireless phones, one that every user must uphold.
When operating a car, driving is your first responsibility. When using your 
wireless phone behind the wheel of a car, practice good common sense 
and remember the following tips:
1.  Get to know your wireless phone and its features such as speed dial and 
redial. Carefully read your instruction manual and learn to take advantage 
of valuable features most phones offer, including automatic redial and 
memory. Also, work to memorize the phone keypad so you can use the 
speed dial function without taking your attention off the road. 
2.  When available, use a hands-free device. A number of hands-free 
wireless phone accessories are readily available today. Whether you 
choose an installed mounted device for your wireless phone or a speaker 
phone accessory, take advantage of these devices if available to you. 
3.  Make sure you place your wireless phone within easy reach and where 
you can reach it without removing your eyes from the road. If you get 
an incoming call at an inconvenient time, if possible, let your voicemail 
answer it for you. 
4.  Suspend conversations during hazardous driving conditions or situations. 
Let the person you are speaking with know you are driving; if necessary, 
suspend the call in heavy traffic or hazardous weather conditions. Rain, 
sleet, snow, and ice can be hazardous, but so is heavy traffic. As a driver, 
your first responsibility is to pay attention to the road.
5.  Don’t take notes or look up phone numbers while driving. If you are 
reading an address book or business card, or writing a “to-do” list while 
driving a car, you are not watching where you are going. It is common 
sense. Do not get caught in a dangerous situation because you are  
						

							201Safety
reading or writing and not paying attention to the road or nearby vehicles.
6.  Dial sensibly and assess the traffic; if possible, place calls when you are 
not moving or before pulling into traffic. Try to plan your calls before you 
begin your trip or attempt to coincide your calls with times you may be 
stopped at a stop sign, red light, or other wise stationary. But if you need 
to dial while driving, follow this simple tip - dial only a few numbers, 
check the road and your mirrors, then continue. 
7.  Do not engage in stressful or emotional conversations that may be 
distracting. Stressful or emotional conversations and driving do not mix; 
they are distracting and even dangerous when you are behind the wheel 
of a car. Make people you are talking with aware you are driving and if 
necessary, suspend conversations which have the potential to divert 
your attention from the road.
8.  Use your wireless phone to call for help. Your wireless phone is one of 
the greatest tools you can own to protect yourself and your family in 
dangerous situations -- with your phone at your side, help is only three 
numbers away. Dial 911 or other local emergency number in the case of 
fire, traffic accident, road hazard, or medical emergency. Remember, it’s 
a free call on your wireless phone! 
9.  Use your wireless phone to help others in emergencies. Your wireless 
phone provides you a perfect opportunity to be a “Good Samaritan” in 
your community. If you see an auto accident, crime in progress or other 
serious emergency where lives are in danger, call 911 or other local 
emergency number, as you would want others to do for you. 
10. Call roadside assistance or a special wireless non-emergency assistance 
number when necessary. Certain situations you encounter while driving 
may require attention, but are not urgent enough to merit a call for 
emergency services. But you can still use your wireless phone to lend 
a hand. If you see a broken-down vehicle posing no serious hazard, 
a broken traffic signal, a minor traffic accident where no one appears 
injured or a vehicle you know to be stolen, call roadside assistance or 
other special non-emergency wireless number.
  The above tips are meant as general guidelines. Before deciding to use 
your mobile device while operating a vehicle, it is recommended that 
you consult your applicable jurisdiction’s local laws or other regulations  
						

							202Safety
regarding such use. Such laws or other regulations may prohibit or 
other wise restrict the manner in which a driver may use his or her phone 
while operating a vehicle. 
Consumer Information on SAR
(Specific Absorption Rate)
This model phone meets the Government’s requirements for exposure 
to radio waves. Your wireless phone is a radio transmitter and receiver. 
It is designed and manufactured not to exceed the emission limits for 
exposure to radiofrequency (RF) energy set by the Federal Communications 
Commission (FCC) of the U.S. Government. These FCC exposure limits 
are derived from the recommendations of two expert organizations, the 
National Counsel on Radiation Protection and Measurement (NCRP) and the 
Institute of Electrical and Electronics Engineers (IEEE). In both cases, the 
recommendations were developed by scientific and engineering experts 
drawn from industry, government, and academia after extensive reviews of 
the scientific literature related to the biological effects of RF energy.
The exposure limit for wireless mobile phones employs a unit of measurement 
known as the Specific Absorption Rate, or SAR. The SAR is a measure of the 
rate of absorption of RF energy by the human body expressed in units of watts 
per kilogram (W/kg). The  FCC requires wireless phones to comply with a safety 
limit of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates 
a substantial margin of safety to give additional protection to the public and to 
account for any variations in measurements.
Tests for SAR are conducted using standard operating positions specified 
by the FCC with the phone transmitting at its highest certified power level 
in all tested frequency bands. Although SAR is determined at the highest 
certified power level, the actual SAR level of the phone while operating 
can be well below the maximum value. Because the phone is designed to 
operate at multiple power levels to use only the power required to reach 
the network, in general, the closer you are to a wireless base station 
antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested 
and certified to the FCC that it does not exceed the limit established by  
						

							203Safety
the government adopted requirement for safe exposure. The tests are 
performed in positions and locations (e.g., at the ear and worn on the body) 
as required by the FCC for each model.
The FCC has granted an Equipment Authorization for this model phone 
with all reported SAR levels evaluated as in compliance with the FCC RF 
emission guidelines. 
The highest SAR value for this model phone when tested for use at the 
ear is 1.14 W/kg and when worn on the body, as described in this user’s 
manual, is 1.17 W/kg. While there may be differences between SAR levels 
of various phones and at various positions, they all meet the government 
requirement for safe exposure. 
SAR information on this model phone is on file with the FCC and can be 
found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid/ 
after searching on FCC ID ZNFVS840.
To find information that pertains to a particular model phone, this site uses 
the phone FCC ID number which is usually printed somewhere on the 
case of the phone. Sometimes it may be necessary to remove the battery 
pack to find the number. Once you have the FCC ID number for a particular 
phone, follow the instructions on the website and it should provide values 
for typical or maximum SAR for a particular phone.
Additional information on Specific Absorption Rates (SAR) can be found 
on the Cellular Telecommunications Industry Association (CTIA) website at 
http://www.ctia.org/
*In the United States and Canada, the SAR limit for mobile phones used 
by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. 
The standard incorporates a substantial margin of safety to give additional 
protection for the public and to account for any variations in measurements. 
						

							204Safety
FCC Hearing-Aid Compatibility (HAC) Regulations 
for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission (FCC) 
Report and Order in WT Docket 01-309 modified the exception of wireless 
phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to 
require digital wireless phones be compatible with hearing-aids. The intent 
of the HAC Act is to ensure reasonable access to telecommunications 
services for persons with hearing disabilities.
While some wireless phones are used near some hearing devices (hearing 
aids and cochlear implants), users may detect a buzzing, humming, or 
whining noise. Some hearing devices are more immune than others to this 
interference noise, and phones also vary in the amount of interference they 
generate.
The wireless telephone industry has developed a rating system for 
wireless phones, to assist hearing device users to find phones that may 
be compatible with their hearing devices. Not all phones have been rated. 
Phones that are rated have the rating on their box or a label located on the 
box.
The ratings are not guarantees. Results will vary depending on the user’s 
hearing device and hearing loss. If your hearing device happens to be 
vulnerable to interference, you may not be able to use a rated phone 
successfully. Trying out the phone with your hearing device is the best way 
to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely 
to generate less interference to hearing devices than phones that are not 
labeled. M4 is the better/higher of the two ratings.
Hearing devices may also be rated. Your hearing device manufacturer or 
hearing health professional may help you find this rating. Higher ratings 
mean that the hearing device is relatively immune to interference noise. 
The hearing aid and wireless phone rating values are then added together. A 
sum of 5 is considered acceptable for normal use. A sum of 6 is considered 
for best use. 
						

							205Safety
In the example to the left, if a hearing aid meets the M2 level 
rating and the wireless phone meets the M3 level rating, the 
sum of the two values equal M5. This should provide the 
hearing aid user with “normal usage” while using their 
hearing aid with the particular wireless phone. “Normal usage” in this 
context is defined as a signal quality that’s acceptable for normal  operation.
The M mark is intended to be synonymous with the U mark. The T mark 
is intended to be synonymous with the UT mark. The M and T marks are 
recommended by the Alliance for Telecommunications Industries Solutions 
(ATIS). The U and UT marks are referenced in Section 20.19 of the FCC 
Rules. The HAC rating and measurement procedure are described in the 
American National Standards Institute (ANSI) C63.19 standard.
When you’re talking on a cell phone, it’s recommended that you turn the BT 
(Bluetooth) mode off for HAC.
According to HAC policy(KDB 285076), we state this handset has not been 
rated for hearing aid compatibility with respect to the WiFi capability.
For information about hearing aids and digital wireless phones
Wireless Phones and Hearing Aid Accessibility
http://www.accesswireless.org/Home.aspx
FCC Hearing Aid Compatibility and Volume Control
http://www.fcc.gov/cgb/consumerfacts/hac_wireless.html 
						

							206Specifications
%JW9
.PCJMF

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a 
subsidiary of Rovi Corporation. This is an official DivX Certified® device that 
plays DivX video. Visit divx.com for more information and software tools to 
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
® device must be 
registered in order to play purchased DivX Video-on-Demand (VOD) movies. 
To obtain your registration code, locate the DivX VOD section in your device 
setup menu. Go to vod.divx. com for more information on how to complete 
your registration.
DivX Certified
® to play DivX® video up to HD 720p, including premium 
content.
DivX
®, DivX Certified® and associated logos are trademarks of Rovi 
Corporation or its subsidiaries and are used under license.
Dolby Mobile License notice
  Manufactured under license from Dolby Laboratories. Dolby and the 
double-D symbol are trademarks of Dolby Laboratories. 
						

							207FA Q
Please check to see if any problems you have encountered with your phone 
are described in this section before taking the phone in for service or calling 
a service representative.
Category Sub-Category Question Answer
BluetoothBluetooth 
DevicesWhat are the functions 
available via Bluetooth?Connecting to Stereo/Mono Headset, 
Car Kit, FTP server is possible. When it’s 
connected to another phone via Bluetooth, 
you can receive Contacts data.
BluetoothBluetooth 
deviceIf my Bluetooth device 
is connected, can I listen 
to my music through 
my 3.5mm wired 
headphones?When a Bluetooth device is connected, all 
system sounds are played over the headset. 
As a result, you will not be able to listen to 
music through your wired headphones.
DataContacts 
BackupHow can I back up 
Contacts?The Contacts data can be synchronized 
between your phone and Gmail™.
Data
SynchronizationIs it possible to set up one-
way-sync with Gmail?Only two-way synchronization is available.
Data
SynchronizationIs it possible to 
synchronize all the Email 
folders?The Inbox is automatically synchronized. You 
can view other folders by tapping the Menu 
Key 
 and selecting Folders.
Data
Synchronization
Is it possible to transfer 
Contacts data from a 
feature phone to an 
Android™ phone?Yes, if your contacts can be extracted into 
a .CSV file.
How to transfer:
1. Create “.CSV” file with the contacts on 
your current phone (you may be able to use 
the PC suite software provided by LGE).
2. Log into Gmail with your PC.
3. Click Contacts. 
4. Click Import.
5. Attach the “.CSV” file.
6. Your contacts will then be synchronized 
between your Android phone and Gmail.
Google™ 
ServiceGmail Log-InShould I have to log into 
Gmail whenever I want to 
access Gmail?Once you log into Gmail, you don’t need to 
log in Gmail again.
Google 
ServiceGoogle 
AccountIs it possible to filter 
emails?No, email filtering is not supported via the 
phone.
Phone 
FunctionYouTube™Is it possible to play 
YouTube videos?Yes, YouTube videos are supported but may 
have to be viewed through the YouTube 
application (and not the Browser). 
						

							208FA Q
Category Sub-Category Question Answer
Phone 
FunctionEmailWhat happens when 
I execute another 
application while writing 
an email?Your email will automatically be saved as 
a draft.
Phone 
FunctionRingtoneIs there a file size limitation 
for when I want to use an 
.MP3 file as a ringtone?There is no file size limitation.
Phone 
FunctionMessage 
TimeMy phone does not display 
the time of receipt for 
messages older than 24 
hours. How can I change 
this?You will only be able to see the times for 
messages received the same day.
Phone 
FunctionmicroSD CardWhat is the maximum 
supported size for a 
memory card?32GB memory cards are compatible.
Phone 
FunctionNavigationIs it possible to install 
another navigation 
application on my phone?Any application that is available on Play 
Store and is compatible with the hardware 
can be installed and used.
Phone 
Function
Synchronization
Is it possible to 
synchronize my contacts 
from all my email 
accounts?Only Gmail and MS Exchange server 
(Company Email Server) contacts can be 
synchronized.
Phone 
FunctionWait and 
PauseIs it possible to save a 
contact with Wait and 
Pause in the numbers?If you transferred a contact with the Wait 
& Pause functions saved into the number, 
those functions will not be recognized. You 
will need to re-save each number.
How to re-save numbers with Wait and Pause:1.   From the Home Screen, tap the Phone 
Key  (in the Quick Keys bar).
2.  Dial the number, then tap the Menu 
Key 
.
3. Tap Add 2-sec pause or Add wait.
4.  Enter the remaining number(s) and 
continue saving the number as necessary.
Phone 
FunctionSecurity
What are the phone’s 
security functions?You are able to set the phone to require 
the entry of an unlock sequence (pattern, 
PIN, or password) before the phone can be 
accessed or used.