LG Hx806sg Owners Manual

							Operating\f1
Op\brating4
\fhanging subtitle code page
y
If	the	subtitle	is	displayed	in	broken	letter,	you	can	change	the	subtitle	code	page	to	view	the	subtitle	file	properly.
1.	 During	playback,	press	IN\bO/DISPLAY	(
m )	to	display	the	playback	menu.
2.	 Use	\f/S	to	select	the	[\fode	Page]	option.
3.	 Use	A/D	to	select	desired	code	option.
	4.	 Press	BA\fK(x)	to	exit	the	On-Screen	display.
Audio \fD Recording
You	can	record	one	desired	track	or	all	of	the	tracks	in	Audio	\fD	to	a	USB	storage	device.
1.	 Insert	a	USB	storage	device	to	the	USB	port	on	the	front	panel.
2.	 Press	B	(OPEN/\fLOSE),	and	place	an	Audio	\fD	on	the	disc	tray.
Press	B	(OPEN/\fLOSE)	to	close	the	disc	tray.	The	playback	starts	automatically.
3.	 Press	IN\bO/DISPLAY	(
m )	to	display	the	option	menu.
4.	 Use	\f/S	to	select	[\fD	Recording]	option,	and	press	ENTER	(\b).
5.	 Use	\f/S	to	select	a	track	you	wish	to	copy	on	the	menu,	and	press	ENTER	(\b).
Repeat	this	step	to	select	tracks	as	many	as	you	can.
Selects	all	the	tracks	on	an	Audio	\fD.
Selects	an	encoding	option	from	the	pop-up	menu	(128kbps,	192kbps,	320kbps)
\fancels	the	recording	and	returns	to	the	previous	screen.
6.	 Use	\f/S/A/D	to	select	[Start],	and	press	ENTER	(\b).	
7.	 Use	\f/S/A/D	to	select	a	destination	folder	to	be	copied.
If	you	want	to	create	a	new	folder,	use		
\f/S/A/D	to	select	[New	\bolder]	and	press	ENTER	(\b ).	
Enter	a	folder	name	using	virtual	keyboard,	and	press	ENTER	(\b)	while	[OK]	is	selected.
 
						

							Operating
\f2
Op\brating4
8.	 Use	\f/S/A/D	to	select	[OK],	and	press	ENTER	(\b )	to	start	Audio	\fD	recording.
If	you	want	to	stop	in	progressing	Audio	\fD	recording,	press	ENTER	(\b)	while	[\fancel]	is	highlighted.
9.	 A	message	appears	when	Audio	\fD	recording	is	completed.	Press	ENTER	(\b)	to	check	the	music	file	created	in	the	destination	folder.
	y The
	 table 	 below 	 shows 	 the 	 average 	r
ecording 	 time 	 from 	 an 	 audio 	 track 	 with 	
4

	 minutes 	 of 	 playback 	 time 	 to 	 a 	 music 	 file 	
with

	 192 	 kbps 	 as 	 an 	 example.
stop	mode while 	 playback
1 	 min. 4
	 min.
	yR

ecording 	 times 	 in 	 the 	 table 	 above 	 are 	
appr

oximate.
	y A

ctual 	 recording 	 time 	 for 	 USB 	 storage 	
d

evice
	v
 aries
	d
 epending
	o
 n
	t
 he
	U
 SB
	s
 torage 	
de

vice’s 	 ability.
	yM

ake 	 sure 	 that 	 there 	 is 	 minimum 	 of 	 50 	 MB 	
fr

ee
	
space 	 is 	 needed 	 when 	 recording 	 into 	
the

	
USB 	 storage 	 device.
	yT

he
	
length 	 of 	 the 	 music 	 should 	 be 	 longer 	
than

	 20 	 seconds 	 for 	 the 	 proper 	 recording.
	yD

o
	
not 	 turn 	 off 	 this 	 player 	 or 	 extract 	 the 	
c

onnected
	U
 SB
	s
 torage
	d
 evice
	d
 uring
	A
 udio 	
\fD

	
recording.
,,Not\b
The	recording	or	copying	features	on	this 	 player 	 are 	 provided 	 for 	 your 	 personel 	
and

	 noncommercial 	 use. 	
T
 he 	 making 	 of 	
unauthor

ized 	 copies 	 of 	 copy-protected 	
mat

erial, 	 including 	 computer 	 programs, 	 files, 	
br

oadcasts 	 and 	 sound 	 recordings, 	 may 	 be 	 an 	
infr

ingement 	 of 	 copyrights 	 and 	 constitute 	 a 	
c

riminal
	o
 ffense.
	T
 his
	e
 quipment
	s
 hould
	n
 ot
	b
 e 	
used

	 for 	 such 	 purposes. 	 LG 	 expressly 	 disclaims 	
an

y 	 responsibility 	 for 	 illegal 	 distribution 	 or 	
use

	 of 	 unauthorized 	 content 	 in 	 commercial 	
pur

pose. Be Responsible
Respec\f Copyrigh\fs,>\faution
Displaying MP3 musi\sc 
information (ID3 \bag)
1.	 Select	a	music	file	using	\f /
S /
A /
D .
2.	 Press	IN\bO/DISPLAY	(
m )	to	display	the	option	menu.
3.
   Select	[Information]	option	using	\f /
S,	and	press	ENTER	(\b ).
4.	  The	music	information	will	be	displayed	on	the	screen.
	y Depending
	 on 	 the 	 MP3 	 files, 	 information 	ma
y 	 not 	 be 	 displayed 	 on 	 the 	 screen.
	yMP3

	 files 	 in 	 USB 	 or 	 external 	 HDD 	 are 	 not 	
w

orked 		 for 	 this 	 function. 	,,Not\b
 
						

							Operating\f3
Op\brating4
Radio Operations
Be	sure	that	the	antenna	is	connected.		(Refer	to	the	page	18)
Listening to the radio
1.	 Press	RADIO&INPUT	(
P )	until	TUNER
	 (\bM) 	appears	in	the	display	window.	T he 	 last 	 received 	station	is	tuned	in.
2.	 Press	and	hold	TUNING	 (-/+) 	 for 	 about 	 two 	seconds	until	the	frequency	indication	starts	to	change.	Scanning	stops	when	the	unit	tunes	in	a	station.	Or	Press	TUNING	 (-/+) 	 repeatedly. 	
3.	 Adjust	the	volume	by	rotating	VOLUME 	 on 	 the 	front	panel	or	by	pressing	VOL 	 (+/- 	 ) 	 on 	 the 	remote	control.
Presetting the Radio Stations
You	can	preset	50	stations	for	\bM.		Before	tuning,	make	sure	that	you	have	turned	down	the	volume.	
1.	 Press	RADIO&INPUT	(
P )	until	the	TUNER
	 (\bM) 	appears	in	the	display	window.
2.	 Select	the	desired	frequency	by	using		TUNING	(-/+).
3.	 Press	ENTER	(\b)	a	preset	number	will	flash	in	the	display	window.
4.	 Press	PRESET	(-/+)	to	select	the	preset	number	you	want.
5.	 Press	ENTER	(\b).	The	 station 	 is 	 stored.
6.	 Repeat	the	steps	2	to	5	to	store	other	stations.
Deleting all the saved stations
Press	and	hold	\fLEAR	for	two	seconds.		“ERASE	ALL”	will 	 flash 	 up. 	T hen 	 all 	 the 	 saved 	 stations 	are	deleted.
Deleting a saved station
1.	 Press	PRESET	-	/	+	to	Select	a	preset	number	you	want	to	delete.
2.	 Press	\fLEAR,	the	preset	number	will	blink	in	the	display	window.
3.	 Press	\fLEAR	again,	to	delete	the	selectd	preset	number.
Improving poor FM reception
Press	B	(blue)	(MONO/STEREO)	coloured	button	on	the	remote	control.	This 	 will 	 change 	 the 	 tuner 	 from 	stereo	to	mono	and	usually	improve	the	reception.
See information about a radio 
station
The	\bM	tuner	is	supplied	with	the	RDS	(Radio	Data	System)	facility.	This 	 shows 	 information 	 about 	 the 	radio	station	being	l istened	t o.	P ress	R DS	r epeatedly 	to	cycle	through	the	various	data	types:
PS(Programme	Service	Name)	The	name	of	the	channel	will	appear	in	the	display
PTY(Programme	Type 	 Recognition)	The	programme	type	(e.g.	Jazz	or	News)	will	appear	in	the	display.
RT(Radio	Text)	A	text	message	contains	special	information	from	the	broadcast	station.	This	text	may	scroll	across	the	display.
\fT( Time	controlled	by	the	channel)	This	shows	the	time	and	date	as	broadcast	by	the	station.
 
						

							Operating
\f\f
Op\brating4
Enjoying the Net\fast™ 
Entertainment Access
You	can	use	various	content	services	via	Internet	with	the	Net\fast	Entertainment	Access	feature.
1.	 \fheck	the	network	connection	and	settings	(page	20).
2.	 Press	HOME	(n ).
3.	 Select	the	[Net\fast]	using	A/D,	and	press	ENTER	(\b).
4.	 Select	an	o
ption	u sing	\f/S/A/D,	and	press	ENTER	(\b).
	y Detailed
	 information 	 of 	 each 	 service, 	contac
t 	 to 	 the 	 content 	 provider 	 or 	 visit 	
suppor

t 	 link 	 of 	 the 	 service.
	yT

he 	 content 	 of 	 Net\fast 	 services 	 and 	 service 	
r

elated
	i
 nformation,
	i
 ncluding
	u
 ser
	i
 nterface, 	
is

	 subject 	 to 	 changes. 	 Please 	 refer 	 to 	 the 	
w

eb 	 site 	 of 	 each 	 service 	 for 	 most 	 up-to-date 	
inf

ormation.,,Not\b
 
						

							5	 Troubleshooting
\f5
Troubl\bshooting5
\broubleshooting
General
Symptom \fause & Solution
The	Power	does	not	turned	on.Plug	the	power	cord	into	the	wall	outlet	securely.
The	unit	does	not	start	playback.	yInsert	a	playable	disc.	(\fheck	the	disc	type,	colour	system,	and	regional	code.)
	yPlace	the	disc	with	the	playback	side	down.
	yPlace	the	disc	on	the	disc	tray	correctly	inside	the	guide.
	y\flean	the	disc.
	y\fancel	the	Rating	function	or	change	the	rating	level.
The	angle	cannot	be	changed.Multi-angles	are	not	recorded	on	the	DVD	V ideo 	 being 	 played.
\fannot	play	movie,	photo	or	music	files.	yThe	files	are	not	recorded	in	a	format	that	the	unit	can	play.
	yThe	unit	does	not	support	the	codec	of	the	movie	file.
The	remote	control	does	not	work	properly.	yThe	remote	control	is	not	pointed	at	the	remote	sensor	of	the	unit.
	yThe	remote	control	is	too	far	from	the	unit.
	yThere	is	an	obstacle	in	the	path	of	the	remote	control	and	the	unit.
	yThe	batteries	in	the	remote	control	are	exhausted.
The	unit	is	plugged	in,	but	the	power	will	not	turn	on	or	off.You	can	reset	the	unit	as	follows.
Unplug	the	power	cord,	wait	at	least	five	seconds,	and	then	plug	it	in	again.The	unit	is	not	operating	normally.
 
						

							\broubleshooting
\f6
Troubl\bshooting5
Network
Symptom  \fause & Solution
BD-Live	feature	does	not
work.
	yThe	connected	USB	storage	may	not	have	enough	space.	\fonnect	the	USB	storage	with	at	least	1GB	free	space.
	yEnsure	that	the	unit	is	correctly	connected	to	the	local	area	network	and	can	access	the	internet	(see	page	20).
	yYour	broadband	speed	may	not	fast	enough	to	use	the	BD-Live	features.	\fontact	your	Internet	Service	Provider	(ISP)	and	increase	the	broadband	speed	is	recommended.
	yThe	[BD-LIVE	connection]	option	in	the	[Setup]	menu	is	set	to	[Prohibited].	Set	the	option	to	[Permitted].
Streaming	video	services	(such	as	YouTube™,	 etc.) 	 are 	 often 	stopped	or	“buffer”	during 	playback.
Your	broadband	service	speed	may	not	be	fast	enough	to	stream	video	services.	\fontact	your	Internet	Service	Provider	(ISP)	and	increase	the	broadband	speed	is	recommended.
Shared	folder	or	files	from	media	server	are	not	displayed	on	the	device	list.
The	player	is	not	connected	to	the	local	area	network	that	your	media	server	are	connected.
Picture
Symptom  \fause & Solution
There	is	no	picture.	ySelect	the	appropriate	video	input	mode	on	the	T V 	 so 	 the 	 picture 	from	the	unit	appears	on	the	TV 	 screen.
	y\fonnect	the	video	connection	securely.
	y\fheck	the	[HDMI	\folor	Setting]	in	the	[Setup]	menu	is	set	to	the	appropriate	item	that	conforms	to	your	video	connection.
	yYour	TV	 may 	 not 	 suppot 	 the 	 resolution 	 you 	 have 	 set 	 on 	 the 	 player. 	\fhange	the	resolution	that	your	TV 	 accepts.
	yThe	player’s	HDMI	OUT	jack	is	connected	to	a	DVI	device	that	does	not	support	copyright	protection.
Picture	noise	appears	yYou	are	playing	a	disc	recorded	in	a	color	system	that	is	different	from	your	TV.
	ySet	the	resolution	which	your	TV 	 accepts.
Blu-ray	3D	disc	playback	does	not	output	3D	views.	y\fonnect	the	player	to	your	TV 	 with 	 HDMI 	 cable 	 ( Type 	 A, 	 High 	 Speed 	HDMI™	\fable).
	yYour	TV	 may 	 not 	 support 	“HDMI 	 1.4 	 3D 	 mandatory 	 format”. 	
	yThe	[3D	Mode]	option	in	the	[Setup]	menu	is	set	to	[Off ].		Set	the	option	to	[On].
 
						

							\broubleshooting\f7
Troubl\bshooting5
Sound
Symptom  \fause & Solution
There	is	no	sound	or	the	sound	is	distorted.	y\fonnect	the	audio	connection	securely.
	yThe	input	source	setting	on	the	amplifier	or	the	connection	to	the	amplifier	is	incorrect.
	yThe	unit	is	in	scan,	slow	motion,	or	pause	mode.
	yThe	sound	volume	is	low.
	y\fheck	that	the	connected	amplifier	is	compatible	with	audio	format	output	from	the	unit.
	yThe	unit’s	HDMI	OUT	jack	is	connected	to	a	DVI	device.	T he 	 DVI 	 jack 	does	not	accept	audio	signal.
	y\fheck	the	device	connected	to	unit’s	HDMI	OUT	jack	is	compatible	with	audio	format	output	from	the	unit.
\fustomer Support
You	can	update	the	Player	using	the	latest	software	to	enhance	the	products	operation	and/or	add	new	features.	To	 obtain 	 the 	 latest 	 software 	 for 	 this 	 player 	 (if 	 updates 	 have 	 been 	 made),	please	visit	http://lgservice.com	or	contact	LG	Electronics	customer	care	center.
Open source software notice
To	obtain	the	corresponding	source	code	under	GPL,	LGPL	and	other	open	source	licenses,	please	visit	http://opensource.lge.com.	All	referred	license	terms,	warranty	disclaimers	and	copyright	notices	are	available	to	download	with	the	source	code.
 
						

							6	 Appendix	
Appendix
\f8
App\bndix6
\fontrolling a \bV with 
the Supplied Remote 
\fontrol
You	can	control	your	T V 	 using 	 the 	 buttons 	 below.
By pressingYou can
1
	( TV	POWER)Turn	the	TV 	 on 	 or 	 off.
AV/INPUTSwitch	the	TV’s	input	s ource 	between	the	TV 	 and 	 other 	input	sources.
PR/\fH	\f/SScan	up	or	down	through	memorized	channels.
VOL	+/–Adjust	the	volume	of	the	T V
MUTETurn	the	TV’s	 volume 	 on 	or	off
Depending	on	the	unit	being	connected,	you	ma
y 	 not 	 be 	 able 	 to 	 control 	 your 	T V 	 using 	 some 	
of

	 the 	 buttons.,,Not\b
Setting up the remote to 
control your \bV
You	can	operate	your	T V 	 with 	 the 	 supplied 	 remote 	control.		If	your	TV	 is 	 listed 	 in 	 the 	 table 	 below, 	 set 	 the 	appropriate	manufacturer	code.
1.	 While	holding	down	1	(TV	POWER)	button,	and	press	the	manufacturer	code	for	your	TV	with	the	numerical	buttons	(see	the	table	below).	
Manufac\furerCo\be Number
LG
1(Default),	2
Zenith1,	3,	4
GoldStar1,	2
Samsung6,	7
Sony8,	9
Hitachi 4
2.	 Release	the	1	(TV	POWER)	button	to	complete	setting.
Depending	on	y our	T V,	s ome	o r	a ll	b uttons	m ay	n ot 	function	on	the	TV, 	 even 	 after 	 entering 	 the 	 correct 	manufacturer	code.	When	 you 	 replace 	 the 	 batteries 	of	the	remote,	the	code	number	you	have	set	may	be	reset	to	the	default	setting.	Set	the	appropriate	code	number	again.
   
						

							Appendix\f9
App\bndix6
Network Software 
Update
Network update notification
\brom	time	to	time,	performance	improvements	and/or	additional	features	or	services	may	be	made	available	to	units	that	are	connected	to	a	broadband	home	network.	If	there	is	new	software	available	and	the	unit	is	connected	to	a	broadband	home	network,	t he	p layer	w ill	i nform	y ou	a bout	t he 	update	as	follows.
Option 1: 
1.	 The	update	menu	will	appear	on	the	screen	when	you	turn	on	the	player.
2.	 Use	A/D	to	select	a	desired	option	and	then	press	ENTER	(\b).
[OK\bStarts	the	software	update.
[Cancel\bExits	the	update	menu	and	displays	it	next	booting.
[Hide\bExits	the	update	menu	and	it	does	not	appear	until	next	software	is	uploaded	in	the	update	server.
Option 2:
If	the	software	update	is	available	from	the	update	server,	the	“Software
	 Update”	 icon 	 appears 	 at 	 the 	bottom	of	the	Home	menu.	Press	blue	(B)	colored	button	to	start	the	update	procedure.
Software Update
You	can	update	the	player	using	the	latest	software	to	enhance	the	products	operation	and/or	add	new	features.	You 	 can 	 update 	 the 	 software 	 by 	connecting	the	unit	directly	to	the	software	update	server.
	yBefore
	 updating 	 the 	 software 	 in 	 your 	 player, 	r
emove 	 any 	 disc 	 and 	 USB 	 Device 	 from 	 the 	
pla

yer.
	yB

efore 	 updating 	 the 	 software 	 in 	 your 	 player, 	
tur

n 	 the 	 player 	 off 	 and 	 then 	 turn 	 it 	 back 	 on.
	yDur

ing 	 the 	 software 	 update 	 procedure, 	 do 	
not

	 turn 	 off 	 the 	 player 	 or 	 disconnect 	 A\f 	
po

wer, 	 or 	 do 	 not 	 press 	 any 	 button.
	yI

f 	 you 	 cancel 	 the 	 update, 	 turn 	 off 	 the 	 power 	
and

	 turn 	 it 	 on 	 for 	 stable 	 performance.
	yT

his 	 unit 	 cannot 	 be 	 updated 	 to 	 previous 	
sof

tware 	 version.,,Not\b
1.	 \fheck	the	network	connection	and	settings	(page	20).
2.	 Select	[Software]	option	in	the	[Setup]	menu	then	press	ENTER	(\b).
3.	 Select	[Update]	option,	and	press	ENTER	(\b).
The	player	will	check	for	the	newest	update.	
	y Pressing
	 ENTER 	 (b) 	 while 	 checking 	 for 	 the 	updat
e 	 will 	 end 	 the 	 process.
	yI

f 	 there 	 is 	 no 	 update 	 available, 	 the 	 Message, 	
“No

	 update 	 is 	 found.”
	
 appears. 	 Press 	 ENTER 	
(b)

	 to 	 return 	 to 	 the 	 [Home 	 Menu].,,Not\b
4.	 If	newer	version	exists,	the	message	“ A 	 new 	update	was	found.	Do	you	want	to	download	it?”	appears. 	
 
						

							Appendix
50
App\bndix6
5. Select	[OK]	to	download	the	update.	(Selecting	[\fancel]	will	end	the	update.)
6. The	player	starts	downloading	the	newest	update	from	the	server.	(Downloading	will	takes	several	minutes	depending	on	your	home	network	condition)
7. When	downloading	is	completed,	the	message,	“Download	is	complete.	Do	you	want	to	update?”	 appears.
8. Select	[OK]	to	start	updating.	(Selecting	[\fancel]	will	end	the	update	and	downloaded	fi le	w ill	n ot	b e	r e-usable.	T o	u pdate 	software	the	next	time,	the	software	update	procedure	has	to	be	started	from	the	beginning	again.)
Do	not	turn	off	the	power	during	the	software	updat
e.,>Caution
If	the	software	includes	the	driver	update,	disc	tray 	 may 	 open 	 during 	 the 	 process.,,Not\b
9.	 When	update	is	completed,	the	power	will	be	turned	off	automatically	in	a	few	seconds.
10.	Turn	the	power	back	on.	T he 	 system 	 now 	operates	with	the	new	version.	
The	Software	Update	function	may	not	w
ork 	 properly 	 depending 	 on 	 your 	 internet 	
en

vironment. 	 In 	 this 	 case, 	 you 	 can 	 obtain 	
the

	 latest 	 software 	 from 	 the 	 authorized 	 LG 	
E

lectronics 	 Service 	 \fenter 	 then 	 update 	 your 	
p

layer.
	R
 efer
	t
 o
	“
 \fustomer
	S
 upport”
	o
 n
	p
 age
	4
 7.,,Not\b
About Nero 
MediaHome 4 
Essentials
Nero	MediaHome	4	Essentials	is	a	software	for	sharing	video,	audio	and	photo	files	stored	on	your	computer	to	this	player	as	a	DLNA-compatiable	digital	media	server.
	yThe
	 Nero 	 MediaHome 	 4 	 Essentials 	 \fD-
ROM 	 is 	 designed 	 for 	 P\fs 	 and 	 should 	 not 	
be

	 inserted 	 in 	 this 	 player 	 or 	 in 	 any 	 product 	
other

	 than 	 a 	 P\f.
	yT

he 	 supplied 	 Nero 	 MediaHome 	 4 	 Essentials 	
\fD

-ROM 	 is 	 a 	 customized 	 software 	 edition 	
only

	 for 	 sharing 	 files 	 and 	 folders 	 to 	 this 	
pla

yer.
	yT

he 	 supplied 	 Nero 	 MediaHome 	 4 	 Essentials 	
sof

tware 	 does 	 not 	 support 	 following 	
func

tions: 	
T
 ranscoding, 	 Remote 	 UI, 	
T
 V 	
contr

ol, 	 Internet 	 services 	 and 	 Apple 	 iTunes
	yT

his 	 manual 	 explains 	 operations 	 with 	
the

	 English 	 version 	 of 	 Nero 	 MediaHome 	
4

	 Essentials 	 as 	 examples. 	 \bollow 	 the 	
explanation

	 referring 	 to 	 the 	 actual 	
operations

	 of 	 your 	 language 	 version.,,Not\b
Installing Nero MediaHome 4 
Essentials 
Before	you	install	Nero	MediaHome	4	Essentials,	check	the	system	requirement	shown	below.
	yWindows®	XP	(Service	P ack	2	o r	h igher),	W indows 	Vista®	(no	Service	Pack	required),	Windows® 	 XP 	Media	\fenter	Edition	2005	(Service	Pack	2	or	higher),	Windows	 Server® 	 2003
	yWindows	Vista®	 64-bit 	 edition 	 (application 	 runs 	in	32-bit	mode)
	yHard	drive	space:	200	MB	hard	drive	space	for	a	typical	installation	of	Nero	MediaHome	stand-alone
	y1.2	GHz	Intel®	Pentium®	III	or	AMD		Sempron™	2200+	processors
	yMemory:	256	MB	RAM