LG Hx 995tz Owners Manual

31Installation
 3Installation
  Connecting to your 
Home Network
This player can be connected to a local area 
network (LAN) via the LAN port on the rear 
panel or the internal wireless module. 
By connecting the unit to a broadband home 
network, you have access to services such 
as software updates, Home Link, BD-Live™ 
interactivity and streaming services.
Wired network connection
Using a wired network provides the best 
performance, because the attached devices 
connect directly to the network and...

32Installation
Installation 3
Wired Network Setup
Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
If there is a DHCP server on the local area 
network (LAN) via wired connection, this player 
will automatically be allocated an IP address. 
After making the physical connection, a small 
number of home networks may require the 
player’s network setting to be adjusted. Adjust 
the [NETWORK] setting as follow.
1. Select [Connection Setting] option in the...

33Installation
 3Installation
Wireless Network Connection
Another connection option is to use an Access 
Point or a wireless router. In the example 
confi guration for wireless connection below, 
this player would be able to access content 
from either of the PCs.
The network confi guration and connection 
method may vary depending on the 
equipment in use and the network 
environment.
This player is equipped with an IEEE 802.11n 
(2.4 GHz band only) wireless module, which 
also supports the 802.11b/g...

34Installation
Installation 3
Wireless Network Setup
Before setting the wireless network, you need 
to:
 –  connect the broadband internet to the 
wireless home network.
 – set the access point or wireless router.
 –  note the SSID and security code of the 
network.
For the wireless network connection, the 
player needs to be set up for network 
communication. This adjustment can be done 
from the [Setup] menu. Adjust the [NETWORK] 
setting as follow. Setting up the access point 
or the wireless router...

35Installation
 3Installation
[Manual] – Your access point may not be 
broadcasting its access point name(SSID). 
Check your router settings through your 
computer and either set your router to 
broadcast SSID, or manually enter the 
access point name(SSID) in [Manual]. 
[Push Button] – If your access point or 
wireless router that supports Push Button 
Confi guration method, select this option 
and press the Push Button on your access 
point or wireless router within 120 counts. 
You do not need to know...

36Installation
Installation 3
•  Some internet connection operations may 
not be possible due to certain restrictions 
set by the Internet service provider (ISP) 
supplying your broadband Internet 
connection.
•  Any fees charged by an ISP including, 
without limitation, connection charges are 
your responsibility.
•  A 10 Base-T or 100 Base-TX LAN port is 
required for wired connection to this player. 
If your internet service does not allow for 
such a connection, you will not be able to 
connect the...

37Installation
 3Installation
USB device 
connection
This player can play movie, music and photo 
fi les contained in the USB device.
1. Insert a USB device to the USB port until it 
fi ts into place.
USB Connection - 1
2. Select [Movie], [Photo] or [Music] using I
/
i
, and press ENTER (
).
3. Select a fi le using U
/u
/I
/i
, and press PLAY 
or ENTER (
) to play the fi le.
You can check the space of the USB device 
on the screen.
4. Select the other mode. And withdraw the 
USB device carefully.
NOTE
•...

38Installation
Installation 3
Settings
Adjust the Setup Settings
You can change the settings of the player in 
the [Setup] menu.
1. Press HOME (
).
2. Use I
/i
 to select the [Setup] and press 
ENTER (
). The [Setup] menu appears.
3. Use U
/u
 to select a fi rst setup option, and 
press 
i to move to the second level.
4. Use  U
/u
 to select a second setup option, 
and press ENTER (
) to move to the third 
level.
5. Use U
/u
 to select a desired setting, and 
press 
i or ENTER () to confi rm your...

39Installation
 3Installation
Resolution
Sets the output resolution of the HDMI video 
signal. Refer to page 28 and page 90 for details 
about the resolution setting.
[Auto]
If the HDMI OUT jack is connected to 
TVs providing display information (EDID), 
automatically selects the resolution best 
suited to the connected TV. 
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[576p (480p)] 
Outputs 576 (480) lines...

40Installation
Installation 3
 [LANGUAGE] Menu 
Display Menu
Select a language for the [Setup] menu and 
on-screen display.
Disc Menu/ Disc Audio/
Disc Subtitle
Select the language you prefer for the audio 
track (disc audio), subtitles, and the disc menu.
[Original] 
Refers to the original language in which the 
disc was recorded.
[Other]
Press ENTER (
) to select another language. 
Use number buttons then ENTER (
) to 
enter the corresponding 4-digit number 
according to the language code list on 
page...