LG Hx 995tz Owners Manual

21Installation
 3Installation
Assembling the 
speaker
Preparation
SpeakerPole
Base
ScrewCable
Cable
Pole
Base
SpeakerScrew
1.  Attach the pole to the base, then secure the 
connection with a supplied screw.
Step 1
2. Insert a speaker wire from the bottom of 
the base.
Step 2
3.  Draw the speaker wire through the inside of 
the pole and also through the hole on the 
bottom of the speaker.
Step 3
HX995TZ-DD.BGBRLL_ENG_0878.indd   21HX995TZ-DD.BGBRLL_ENG_0878.indd   2110. 11. 05    11:0610. 11. 05   ...

22Installation
Installation 3
4.  Attach the speaker to the pole, then secure 
the connection with a supplied screw.
Step 4
5.  Connect the speaker wire to the terminal 
on the speaker.
  Make sure the wire marked black goes in 
to the terminal marked “–” (minus) and the 
other  wire goes in to the terminal marked 
“+” (plus).
Step 5
CAUTION
Be careful that the speaker 
should not fall down.
Otherwise it may result in the 
speaker malfunctioning and 
causing personal injury and/ or 
property damage....

23Installation
 3Installation
Mounting the 
speakers on a wall
You can mount the speakers on a wall. 
Prepare screws and brackets supplied.
When you mount to a wall(concrete), use 
the wall plugs. You should drill some holes 
(Diameter: 6 mm, Depth: more than 32 mm) 
for the mounting.
Screw & Wall plug
20 mm
32 mm3.5 mm
6 mm
1. Attach the wall bracket to the wall with 
screws as shown in the illustration below.
Step 1
Wall plug
Screw
Screw
Wall plug2. Attach the speaker bracket to the speaker 
and fasten...

24Installation
Installation 3
Positioning the 
system
The following illustration shows an example 
of positioning the system. Note that the 
illustrations in these instructions diff er from the 
actual unit for explanation purposes.
For the best possible surround sound, all the 
speakers other than the subwoofer should be 
placed at the same distance from the listening
position (
A).
AB
DE F
AAA
A
A
GC
A Front left speaker (L)/ 
B Front right speaker (R): 
Place the front speakers to the sides of the...

25Installation
 3Installation
Speaker Connection
Wireless connection
The wireless subwoofer makes setup simple, 
too - there are no cables to connect. When you 
turn on the unit and subwoofer the connection 
will be completed automatically.
When the connection is completed, you can 
see the icon on the display window.
NOTE
•  If the wireless connection fails again, check 
whether there is any confl ict or strong 
interference (for example, interference 
from other electronic devices) around your...

26Installation
Installation 3
Connecting to Your TV
Make one of the following connections, 
depending on the capabilities of your existing 
equipment.
•  HDMI connection (page 26)
•  Video connection (page 28)
NOTE
•  Depending on your TV and other equipment 
you wish to connect, there are various ways you 
could connect the player. Use only one of the 
connections described in this manual.
•  Make sure the player is connected directly to 
the TV. Tune the TV to the correct video input 
channel.
•  Do...

27Installation
 3Installation
NOTE
•  Changing the resolution when the connection 
has already been established may result in 
malfunctions. To solve the problem, turn off  the 
player and then turn it on again.
•  When the HDMI connection with HDCP is not 
verifi ed, TV screen is changed to black screen. 
In this case, check the HDMI connection, or 
disconnect the HDMI cable.
•  If there is noise or lines on the screen, please 
check the HDMI cable (length is generally 
limited to 4.5 m).
•  If a...

28Installation
Installation 3
  Video Connection
Connect the VIDEO OUT jack on the player to 
the video in jack on the TV using a video cable. 
You can hear the sound through the system’s 
speakers.
Video Connection
Yellow
TVTV
Yellow
  Resolution Setting
The player provides several output resolutions 
for HDMI OUT jacks. You can change the 
resolution using [Setup] menu.
1. Press HOME (
).
2. Use I
/i
 to select the [Setup] and press 
ENTER (
). The [Setup] menu appears.
3. Use U
/u
 to select [DISPLAY...

29Installation
 3Installation
  Antenna connection
Connect the supplied antenna for listening to 
the radio.
Antenna Connection
NOTE
After connecting the FM wire antenna, 
keep it as horizontal as possible. Be sure to 
fully extend the FM wire antenna.
Connections with 
external device
 PORT. IN connection
You can enjoy the sound from your portable 
audio player through the speakers of this 
system.
Connect the headphones (or line out ) jack 
of the portable audio player into the PORT. 
IN socket of this...

30Installation
Installation 3
 OPTICAL IN connection
You can enjoy the sound from your component 
with a digital optical connection through the 
speakers of this system.
Connect the optical output jack of your 
component into the OPTICAL IN jacks on the 
unit. And then select the [OPTICAL] option by 
pressing RADIO&INPUT and ENTER (
). 
Or press OPTICAL to select directly.
You can also use the F (Function) button on 
the front panel to select the input mode.
Optical Connection
To the digital 
optical...