LG Ht806th Owners Manual

Getti\fg Sta\bted11
\betting \ftarted1
a	 Power	cord
b	 Speakers	connectorsConnects	the	speaker	cables.
c	 Cooling	Fan
d	 Antenna	ConnectorFM-	Connects	the	FM	wired	antenna	AM-	Connects	the	AM	loop	antenna
e	 VIDEO	OUTConnects	to	a	TV	with	video	inputs.
f	 \fDMI	OUTConnects	to	TV	with	\fDMI	inputs.	(Interface	for	digital	audio	and	video)	
g	 OPTICA\b	INConnects	to	optical	audio	equipment.
h	 COMPONENT	 VIDEO	(Y	PB	PR)OUTPUT	(PROGRESSIVE	SCAN)	Connects	to	a	TV	with	Y	PB	PR	inputs.
i	 AUX	(\b/R)...

2	 Connecting
12
Connecting2
Co\f\fecti\fg
Assembli\fg the 
speake\b sta\fd to the 
speake\b
Before	connecting	the	speakers,	assemble	the	speakers.	Please	check	the	items	for	assembling	the	speakers.
Preparation
SpeakerStand
Attach	the	speakers	to	the	speaker	stands	by	rotating	the	screws.
HT806TH-AL_BJORMLK_ENG_4755.indd   122011-02-22   �� 2:09:54 

Co\f\fecti\fg13
Connecting2
Attachi\fg the speake\bs 
to the u\fit
1.	 Connect	the	wires	to	the	unit.	Match	each	wire’s	colored	band	to	the	same	colored	connection	terminal	on	the	rear	of	the	unit.	To	connect	the	cable	to	the	unit,	press	each	plastic	finger	pad	to	open	the	connection	terminal.	Insert	the	wire	and	release	the	finger	pad.
Connect	the	black	stripe	of	each	wire	to	the	terminals	marked	-(minus)	and	the	other	end	to	the	terminals	marked	+	(plus).	
2.	 Connect	the	wires	to	the	speakers.	Connect...

Co\f\fecti\fg14
Connecting2
Positio\fi\fg the system
The	following	illustration	shows	an	example	of	positioning	the	system.	Note	that	the	illustrations	in	these	instructions	differ	from	the	actual	unit	for	explanation	purposes.
For	the	best	possible	surround	sound,	all	the	speakers	other	than	the	subwoofer	should	be	placed	at	the	same	distance	from	the	listening
position	().
AB
D
D
E
E
F
F
AAA
A
A
G
G
C
C
ABA
		Front	left	speaker	(\b)/		Front	right	speaker	(R):Place	the	front	speakers	to	the	sides	of	the...

Co\f\fecti\fg15
Connecting2
Co\f\fectio\fs to You\b 
TV
Make	one	of	the	following	connections,	depending	on	the	capabilities	of	your	existing	equipment.
	
y Depending	on	your	
TV	and	other	
equipment	you	wish	to	connect,	there	are	
various	ways	you	could	connect	the	player.	
Use	only	one	of	the	connections	described	
in	this	manual.
	
y Please	refer	to	the	manuals	of	your	
TV,	
Stereo 	System 	or 	other 	devices 	as 	necessary	
to	make	the	best	connections.,
,Note
	
y Make	sure	the	unit	is	connected...

Co\f\fecti\fg16
Connecting2
HDMI Out Co\f\fectio\f
If	you	have	a	\fDMI	TV	or	monitor,	you	can	connect	it	to	this	unit	using	a	\fDMI	cable	( Type	A,	\figh	Speed	\fDMI™	Cable).	Connect	the	\fDMI	OUT	jack	on	the	unit	to	the	\fDMI	IN	jack	on	a	\fDMI	compatible	 TV	or	monitor.		Set	the	TV’s	source	to	\fDMI	(refer	to	 TV’s	Owner’s	manual).	
Unit
TV
	
y You	can	fully	enjoy	digital	audio	and	video	
signals	together	with	this	\fDMI	connection.
	
y When	you	use	\fDMI	connection,	you	can	
change	the	resolution	for...

Co\f\fecti\fg17
Connecting2
Video Co\f\fectio\f
Connect	the	VIDEO	OUT	jack	on	the	unit	to	the	video	in	jack	on	the	 TV	using	a	video	cable.
You	can	hear	the	sound	through	the	system’s	speakers.
Unit
TV Yell\fw
HT806TH-AL_BJORMLK_ENG_4755.indd   172011-02-22   �� 2:09:56 

Co\f\fecti\fg18
Connecting2
Resolutio\f Setti\fg
The	unit	provides	several	output	resolutions	for	\fDMI	OUT	and	COMPONENT	VIDEO	OUT	jacks.	You	can	change	the	resolution	using	[Setup]	menu.
1.	 Press	n	HOME.
2.	Use	\f/D	to	select	the	[Setup]	and	press	b	ENTER.	The	[Setup]	menu	appears.
3.	 Use	W/S	to	select	[Display]	option	then	press	D	to	move	to	the	second	level.	
4.	 Use	W/S	to	select	the	[Resolution]	option	then	press	D	to	move	to	the	third	level.
5.	 Use	W/S	to	select	the	desired	resolution	then...

Co\f\fecti\fg19
Connecting2
Optio\fal Equipme\ft 
Co\f\fectio\f
AUX I\f Co\f\fectio\f
Connect	an	Output	of	auxiliary	device	to	the	AUX	(\b/R)	INPUT	Connector.
Unit
Red
White
To \fhe au\bio ou\fpu\f j\gacks 
of your componen\f  
(TV, VCR, e\fc.)
If	your	 TV	has	only	one	output	for	audio	
(mono), 	connect 	it 	to 	the 	left 	(white) 	audio 	jack	
on	the	unit.,
,Note
AUDIO (PORT. IN) I\f 
Co\f\fectio\f
Connect	an	output	of	portable	device	(MP3	or	PMP	etc)	to	the	AUDIO	(PORT.	IN)	input	connector.	
MP3...

Co\f\fecti\fg20
Connecting2
USB Co\f\fectio\f
Connect	the	USB	port	of	USB	Memory	(or	MP3	player,	etc.)	to	the	USB	port	on	the	front	of	the	unit.
Removing	the	USB	Device	from	the	unit1.	 Choose	a	different	function	mode	or	press		\b	STOP	twice	in	a	row.2.		Remove	the	USB	device	from	the	unit.
Compatible USB Devices
	yMP3	Player	:	Flash	type	MP3	player.
	yUSB	Flash	Drive	:		
Devices	that	support	USB2.0	or	USB1.1.	
	yThe	USB	function	of	this	unit	does	not	support	some	USB	devices.
USB device \bequi\beme\ft...