LG Ht806th Owners Manual
Have a look at the manual LG Ht806th Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Getti\fg Sta\bted11 \betting \ftarted1 a Power cord b Speakers connectorsConnects the speaker cables. c Cooling Fan d Antenna ConnectorFM- Connects the FM wired antenna AM- Connects the AM loop antenna e VIDEO OUTConnects to a TV with video inputs. f \fDMI OUTConnects to TV with \fDMI inputs. (Interface for digital audio and video) g OPTICA\b INConnects to optical audio equipment. h COMPONENT VIDEO (Y PB PR)OUTPUT (PROGRESSIVE SCAN) Connects to a TV with Y PB PR inputs. i AUX (\b/R) INPUTConnects to an external source with 2 channel audio outputs. Rea\b pa\fel a b c d e i h g f HT806TH-AL_BJORMLK_ENG_4755.indd 112011-02-22 �� 2:09:54
2 Connecting 12 Connecting2 Co\f\fecti\fg Assembli\fg the speake\b sta\fd to the speake\b Before connecting the speakers, assemble the speakers. Please check the items for assembling the speakers. Preparation SpeakerStand Attach the speakers to the speaker stands by rotating the screws. HT806TH-AL_BJORMLK_ENG_4755.indd 122011-02-22 �� 2:09:54
Co\f\fecti\fg13 Connecting2 Attachi\fg the speake\bs to the u\fit 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad. Connect the black stripe of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus). 2. Connect the wires to the speakers. Connect the other end of each wire to the correct speaker according to the color coding: ColorSpeakerPosi\fion GreyRearRear right BlueRearRear left GreenCenterCenter OrangeSub wooferAny front position RedFrontFront right WhiteFrontFront left To connect the cable to the speakers, press each plastic finger pad to open the connection terminals on the base of each speaker. Insert the wire and release the finger pad. y Be careful to make sure children do not put their hands or any objects into the *speaker duct. *Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure). y The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers far away from either TV screen or PC monitor., >Caution HT806TH-AL_BJORMLK_ENG_4755.indd 132011-02-22 �� 2:09:54
Co\f\fecti\fg14 Connecting2 Positio\fi\fg the system The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (). AB D D E E F F AAA A A G G C C ABA Front left speaker (\b)/ Front right speaker (R):Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. Center speaker: Place the center speaker above or below the monitor or screen. Surround left speaker (\b)/ Surround right speaker (R): Place these speakers behind your listening position, facing slightly inwards. Subwoofer: The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections. Unit HT806TH-AL_BJORMLK_ENG_4755.indd 142011-02-22 �� 2:09:55
Co\f\fecti\fg15 Connecting2 Co\f\fectio\fs to You\b TV Make one of the following connections, depending on the capabilities of your existing equipment. y Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual. y Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections., ,Note y Make sure the unit is connected directly to the TV. Tune the TV to the correct video input channel. y Do not connect your player via your VCR. The image could be distorted by the copy protection system., >Caution Compo\fe\ft Video Co\f\fectio\f Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables. You can hear the sound through the system’s speakers. Unit TV Green Blue Red HT806TH-AL_BJORMLK_ENG_4755.indd 152011-02-22 �� 2:09:56
Co\f\fecti\fg16 Connecting2 HDMI Out Co\f\fectio\f If you have a \fDMI TV or monitor, you can connect it to this unit using a \fDMI cable ( Type A, \figh Speed \fDMI™ Cable). Connect the \fDMI OUT jack on the unit to the \fDMI IN jack on a \fDMI compatible TV or monitor. Set the TV’s source to \fDMI (refer to TV’s Owner’s manual). Unit TV y You can fully enjoy digital audio and video signals together with this \fDMI connection. y When you use \fDMI connection, you can change the resolution for the \fDMI output. (Refer to “Resolution Setting” on page 18.), ,Tip y If a connected \fDMI device does not accept the audio output of the unit, the \fDMI device’s audio sound may be distorted or may not output. y When you connect a \fDMI or DVI compatible device make sure of the following: - Try switching off the \fDMI/DVI device and this unit. Next, switch on the \fDMI/ DVI device and leave it for around 30 seconds, then switch on this unit. - The connected device’s video input is set correctly for this unit. - The connected device is compatible with 720 x 480i (or 576i), 720 x 480p (or 576p), 1 280 x 720p, 1920 x 1080i or 1920 x 1080p video input. y Not all \fDCP-compatible \fDMI or DVI devices will work with this unit. - The picture will not be displayed properly with non-\fDCP device. - This unit does not playback and TV screen is changed to black or green screen or the snow noise may occur on the screen. y If there is noise or lines on the screen, please check the \fDMI cable (\figh Speed \fDMI™ Cable)., ,Note y Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. y When the \fDMI connection with \fDCP is not verified, TV screen is changed to black or green screen or the snow noise may occur on the screen. In this case, check the the \fDMI connection, or disconnect the \fDMI cable., >Caution HT806TH-AL_BJORMLK_ENG_4755.indd 162011-02-22 �� 2:09:56
Co\f\fecti\fg17 Connecting2 Video Co\f\fectio\f Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Unit TV Yell\fw HT806TH-AL_BJORMLK_ENG_4755.indd 172011-02-22 �� 2:09:56
Co\f\fecti\fg18 Connecting2 Resolutio\f Setti\fg The unit provides several output resolutions for \fDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press n HOME. 2. Use \f/D to select the [Setup] and press b ENTER. The [Setup] menu appears. 3. Use W/S to select [Display] option then press D to move to the second level. 4. Use W/S to select the [Resolution] option then press D to move to the third level. 5. Use W/S to select the desired resolution then press b ENTER to confirm your selection. If your TV does not accept the resolution you have set on the player, you can set resolution to 480p (or 576p) as follows: Press \b STOP for more than 5 seconds., ,Note Video Output Resolutio\f Displayed resolution in display window and outputted resolution may different according to connection type. [\fDMI OUT ]: 1080p, 1080i, 720p and 480p (or 576p) and 480i (or 576i) [COMPONENT VIDEO OUT ]: 480p (or 576p) and 480i (or 576i) [ VIDEO OUT ]: 480i (or 576i) HT806TH-AL_BJORMLK_ENG_4755.indd 182011-02-22 �� 2:09:56
Co\f\fecti\fg19 Connecting2 Optio\fal Equipme\ft Co\f\fectio\f AUX I\f Co\f\fectio\f Connect an Output of auxiliary device to the AUX (\b/R) INPUT Connector. Unit Red White To \fhe au\bio ou\fpu\f j\gacks of your componen\f (TV, VCR, e\fc.) If your TV has only one output for audio (mono), connect it to the left (white) audio jack on the unit., ,Note AUDIO (PORT. IN) I\f Co\f\fectio\f Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. MP3 player, etc... Liste\fi\fg to music f\bom you\b po\btable playe\b o\b exte\b\fal device The unit can be used to play the music from many types of portable player or external devices. 1. Connect the portable player to the PORT. IN (PORTAB\bE IN) connector of the unit. Or Connect the external device to the AUX connector of the unit. 2. Turn the power on by pressing 1 (POWER). 3. Select the PORTAB\bE or AUX (\b/R) INPUT function by pressing P RADIO&INPUT. 4. Turn on the portable player or external device and start it playing. HT806TH-AL_BJORMLK_ENG_4755.indd 192011-02-22 �� 2:09:57
Co\f\fecti\fg20 Connecting2 USB Co\f\fectio\f Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. Removing the USB Device from the unit1. Choose a different function mode or press \b STOP twice in a row.2. Remove the USB device from the unit. Compatible USB Devices yMP3 Player : Flash type MP3 player. yUSB Flash Drive : Devices that support USB2.0 or USB1.1. yThe USB function of this unit does not support some USB devices. USB device \bequi\beme\ft yDevices which require additional program installation connected to a computer, are not supported. yDo not extract the USB device while in operation. yFor a large capacity USB, it may take longer than a few minute to be searched. yTo prevent data loss, back up all data. yIf you use a USB extension cable or USB hub, the USB device is not recognized. yUsing NTFS file system is not supported. (Only FAT(16/32) file system is supported.) yThis unit is not supported when the total number of files is 1 000 or more. yExternal \fDD, Card readers, \bocked devices, or hard type usb devices are not supported. yUSB port of the unit cannot be connected to PC. The unit can not be used as a storage device. HT806TH-AL_BJORMLK_ENG_4755.indd 202011-02-22 �� 2:09:57