LG Ht805tq Owners Manual

11Preparation
Preparation
2

Front panel
a 1/\ (POWER) 
Switches the unit ON or OFF. 
b 
Disc Tray
c	Display window 
Shows the current status of the unit.
d VOLUME 
Adjusts speaker volume. 
e F (FUNCTION) 
Changes the input source or function.
f ./> (SKIP) 
Goes to next or previous file/track/chapter. 
Searches backward or forward (Press and 
hold) 
Tunes in the desired radio station.
g x STOP 
Stops playback.
h	N/X (PLAY / PAUSE) 
Starts playback. 
Pauses playback temporarily, press again to 
exit...

1Preparation
Preparation	2
Rear panel
a Power cord
b	Speakers connectors 
Connects the speaker cables.
c	Cooling Fan
d	Antenna Connector 
FM- Connects the FM wired antenna 
AM- Connects the AM loop antenna
e	VIDEO OUT 
Connects to a TV with video inputs. 
f	HDMI OUT ( Version 1.2A) 
Connects to TV with HDMI inputs. 
(Interface for digital audio and video) 
g	OPTICAL IN 
Connects to optical audio equipment.
h	COMPONENT VIDEO (Y PB PR)OUTPUT 
(PROGRESSIVE SCAN) 
Connects to a TV with Y PB PR inputs....

1Installation
Installation
	3
3
Installation
Assembling the 
speaker stand to the 
speaker
1.  Attach the speakers to the speaker stands 
by rotating the screw.
Step 1
2. If you want to arrange the speaker cable, 
draw the speaker cable through the hole on 
the speaker.
Step 
3. Connect the speaker cable.
Step 

HT805TQ-AL_DDZALLK_ENG_9726.indd13   132010-05-24   ¿ÀÈÄ 1:53:26 

1Installation
Installation	3

Attaching the 
speakers to the unit
1.  Connect the wires to the unit. 
Match each wire’s colored band to the 
same colored connection terminal on the 
rear of the unit. To connect the cable to the 
unit, press each plastic finger pad to open 
the connection terminal. Insert the wire and 
release the finger pad.
 Connect the black end of each wire to the 
terminals marked -(minus) and the other 
end to the terminals marked + (plus). 
2. 
Connect the wires to the...

1Installation
Installation
	3

Positioning the 
system
The following illustration shows an example 
of positioning the system. Note that the 
illustrations in these instructions differ from the 
actual unit for explanation purposes.
For the best possible surround sound, all the 
speakers other than the subwoofer should be 
placed at the same distance from the listening
position (A).
A
B
D
D
E
E
F
F
AAA
A
A
G
G
C
CABA
A Front left speaker (L)/  
B Front right speaker (R):  
Place the front speakers...

1Installation
Installation	3

Connections to Your 
TV
Make one of the following connections, 
depending on the capabilities of your existing 
equipment.
NOTE
• Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use only one of the connections described in this manual.
•  Please refer to the manuals of your TV, Stereo 
System or other devices as necessary to make the best connections.
•  Make sure the unit is connected directly to 
the...

1Installation
Installation
	3

HDMI Out Connection
If you have a HDMI TV or monitor, you can 
connect it to this unit using a HDMI cable. 
Connect the HDMI OUT jack on the unit to 
the HDMI IN jack on a HDMI compatible TV or 
monitor.  
Set the TV’s source to HDMI (refer to TV’s 
Owner’s manual). 
HDMI Connection
Unit
TV
TIP
•  You can fully enjoy digital audio and video signals together with this HDMI connection.
•   When you use HDMI connection, you can 
change the resolution for the HDMI output....

1Installation
Installation	3

Video Connection
Connect the VIDEO OUT jack on the unit to the 
video in jack on the TV using a video cable.
You can hear the sound through the system’s 
speakers.
Video Connection
Unit
TV
Yellow

HT805TQ-AL_DDZALLK_ENG_9726.indd18   182010-05-24   ¿ÀÈÄ 1:53:28 

1Installation
Installation
	3

Resolution Setting
The unit provides several output resolutions for 
HDMI OUT and COMPONENT VIDEO OUT jacks. 
You can change the resolution using [Setup] 
menu.
1. 
Press  HOME.
2. 
Use I/i to select the [Setup] and press  
ENTER. The [Setup] menu appears.
3. Use U/u to select [Display] option then 
press i to move to the second level. 
4. 
Use U/u to select the [Resolution] option 
then press i to move to the third level.
5. 
Use U/u to select the desired resolution...

0Installation
Installation	3

Optional Equipment 
Connection
AUX In Connection
Connect an Output of auxiliary device to the 
AUX (L/R) INPUT Connector.
AUX In Connection
Unit
Red
White
To the audio output jacks of your component  (TV, VCR, etc.)
NOTE
If your TV has only one output for audio (mono), connect it to the left (white) audio jack on the unit.
AUDIO (PORT. IN) In 
Connection
Connect an output of portable device (MP3 
or PMP etc) to the AUDIO (PORT. IN) input 
connector. 
PORT.IN...