LG Ht805tq Owners Manual

							
11Preparation
Preparation
2

Front panel
a 1/\ (POWER) 
Switches the unit ON or OFF. 
b 
Disc Tray
c	Display window 
Shows the current status of the unit.
d VOLUME 
Adjusts speaker volume. 
e F (FUNCTION) 
Changes the input source or function.
f ./> (SKIP) 
Goes to next or previous file/track/chapter. 
Searches backward or forward (Press and 
hold) 
Tunes in the desired radio station.
g x STOP 
Stops playback.
h	N/X (PLAY / PAUSE) 
Starts playback. 
Pauses playback temporarily, press again to 
exit pause mode. 
i	Z (OPEN/CLOSE) 
Opens or closes the disc tray.
j  
USB Port 
Connects a USB device.
k	PORT. IN 
Connects to a portable player with audio 
outputs.
l	Microphone jacks 1/2
	 a	 b	 c	d
	 	l	 k	j	 i	h	g	 f	 e	

HT805TQ-AL_DDZALLK_ENG_9726.indd11   112010-05-24   ¿ÀÈÄ 1:53:26 
						

							
1Preparation
Preparation	2
Rear panel
a Power cord
b	Speakers connectors 
Connects the speaker cables.
c	Cooling Fan
d	Antenna Connector 
FM- Connects the FM wired antenna 
AM- Connects the AM loop antenna
e	VIDEO OUT 
Connects to a TV with video inputs. 
f	HDMI OUT ( Version 1.2A) 
Connects to TV with HDMI inputs. 
(Interface for digital audio and video) 
g	OPTICAL IN 
Connects to optical audio equipment.
h	COMPONENT VIDEO (Y PB PR)OUTPUT 
(PROGRESSIVE SCAN) 
Connects to a TV with Y PB PR inputs.
i	AUX (L/R) INPUT 
Connects to an external source with 2 
channel audio outputs.
	 a	 b	 c	 d			 e
	 i	h	g	 f

HT805TQ-AL_DDZALLK_ENG_9726.indd12   122010-05-24   ¿ÀÈÄ 1:53:26 
						

							
1Installation
Installation
	3
3
Installation
Assembling the 
speaker stand to the 
speaker
1.  Attach the speakers to the speaker stands 
by rotating the screw.
Step 1
2. If you want to arrange the speaker cable, 
draw the speaker cable through the hole on 
the speaker.
Step 
3. Connect the speaker cable.
Step 

HT805TQ-AL_DDZALLK_ENG_9726.indd13   132010-05-24   ¿ÀÈÄ 1:53:26 
						

							
1Installation
Installation	3

Attaching the 
speakers to the unit
1.  Connect the wires to the unit. 
Match each wire’s colored band to the 
same colored connection terminal on the 
rear of the unit. To connect the cable to the 
unit, press each plastic finger pad to open 
the connection terminal. Insert the wire and 
release the finger pad.
 Connect the black end of each wire to the 
terminals marked -(minus) and the other 
end to the terminals marked + (plus). 
2. 
Connect the wires to the speakers. 
Connect the other end of each wire to 
the correct speaker according to the color 
coding:
ColorSpeakerPosition
GreyRearRear right
BlueRearRear left
GreenCenterCenter
OrangeSub wooferAny front position
RedFrontFront right
WhiteFrontFront left
To connect the cable to the speakers, press 
each plastic finger pad to open the connection 
terminals on the base of each speaker. Insert 
the wire and release the finger pad.
CAUTION
•  Be careful to make sure children do not put their hands or any objects into the *speaker duct. *Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure).
•  The speakers contain magnet parts, so color 
irregularity may occur on the TV screen or PC monitor screen. Please use the speakers far away from either TV screen or PC monitor.

HT805TQ-AL_DDZALLK_ENG_9726.indd14   142010-05-24   ¿ÀÈÄ 1:53:27 
						

							
1Installation
Installation
	3

Positioning the 
system
The following illustration shows an example 
of positioning the system. Note that the 
illustrations in these instructions differ from the 
actual unit for explanation purposes.
For the best possible surround sound, all the 
speakers other than the subwoofer should be 
placed at the same distance from the listening
position (A).
A
B
D
D
E
E
F
F
AAA
A
A
G
G
C
CABA
A Front left speaker (L)/  
B Front right speaker (R):  
Place the front speakers to the sides of the 
monitor or screen and as flush with the screen 
surface as possible.
C Center speaker:  
Place the center speaker above or below the 
monitor or screen.
D Surround left speaker (L)/  
E Surround right speaker (R):  
Place these speakers behind your listening 
position, facing slightly inwards.
F Subwoofer:  
The position of the subwoofer is not so 
critical, because low bass sounds are not 
highly directional. But it is better to place 
the subwoofer near the front speakers. Turn 
it slightly toward the center of the room to 
reduce the wall reflections.
G Unit

HT805TQ-AL_DDZALLK_ENG_9726.indd15   152010-05-24   ¿ÀÈÄ 1:53:27 
						

							
1Installation
Installation	3

Connections to Your 
TV
Make one of the following connections, 
depending on the capabilities of your existing 
equipment.
NOTE
• Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use only one of the connections described in this manual.
•  Please refer to the manuals of your TV, Stereo 
System or other devices as necessary to make the best connections.
•  Make sure the unit is connected directly to 
the TV. Tune the TV to the correct video input channel.
•  Do not connect your unit via your VCR. The 
image could be distorted by the copy protection system.
Component Video Connection
Connect the COMPONENT VIDEO OUTPUT 
(PROGRESSIVE SCAN) jacks on the unit to the 
corresponding input jacks on the TV using 
component cables. 
You can hear the sound through the system’s 
speakers.
Component Connection
Unit
TV
GreenBlueRed

HT805TQ-AL_DDZALLK_ENG_9726.indd16   162010-05-24   ¿ÀÈÄ 1:53:27 
						

							
1Installation
Installation
	3

HDMI Out Connection
If you have a HDMI TV or monitor, you can 
connect it to this unit using a HDMI cable. 
Connect the HDMI OUT jack on the unit to 
the HDMI IN jack on a HDMI compatible TV or 
monitor.  
Set the TV’s source to HDMI (refer to TV’s 
Owner’s manual). 
HDMI Connection
Unit
TV
TIP
•  You can fully enjoy digital audio and video signals together with this HDMI connection.
•   When you use HDMI connection, you can 
change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 19.)
NOTE
•  If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output.
•   When you connect a HDMI or DVI compatible 
device make sure of the following: 
-   
Try switching off the HDMI/DVI device and this 
unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit.
  -  
The connected device’s video input is set 
correctly for this unit.
  -  
The connected device is compatible with 720 
x 480i (or 576i), 720 x 480p (or 576p), 1 280 x 720p, 1 920 x 1 080i or 1 920 x 1 080p video input.
•   Not all HDCP-compatible HDMI or DVI devices 
will work with this unit. 
-   
The picture will not be displayed properly with 
non-HDCP device.
  -  
This unit does not playback and TV screen is 
changed to black or green screen or the snow noise may occur on the screen.
•   If there is noise or lines on the screen, please 
check the HDMI cable and usea higher version cable than 1.2A HDMI cable. 
CAUTION
•  Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the unit and then turn it on again.
•   When the HDMI connection with HDCP is 
not verified, TV screen is changed to black or green screen or the snow noise may occur on the screen. In this case, check the the HDMI connection, or disconnect the HDMI cable.

HT805TQ-AL_DDZALLK_ENG_9726.indd17   172010-05-24   ¿ÀÈÄ 1:53:28 
						

							
1Installation
Installation	3

Video Connection
Connect the VIDEO OUT jack on the unit to the 
video in jack on the TV using a video cable.
You can hear the sound through the system’s 
speakers.
Video Connection
Unit
TV
Yellow

HT805TQ-AL_DDZALLK_ENG_9726.indd18   182010-05-24   ¿ÀÈÄ 1:53:28 
						

							
1Installation
Installation
	3

Resolution Setting
The unit provides several output resolutions for 
HDMI OUT and COMPONENT VIDEO OUT jacks. 
You can change the resolution using [Setup] 
menu.
1. 
Press  HOME.
2. 
Use I/i to select the [Setup] and press  
ENTER. The [Setup] menu appears.
3. Use U/u to select [Display] option then 
press i to move to the second level. 
4. 
Use U/u to select the [Resolution] option 
then press i to move to the third level.
5. 
Use U/u to select the desired resolution 
then press  ENTER to confirm your 
selection.
NOTE
If your TV does not accept the resolution you have set on the player, you can set resolution to 480p (or 576p) as follows:
Press x STOP for more than 5 seconds.
Video Output 
Resolution
Displayed resolution in display window and 
outputted resolution may different according 
to connection type.
[HDMI OUT ]: 1 080p, 1 080i, 720p and 480p (or 
576p) and 480i (or 576i)
[COMPONENT VIDEO OUT ]: 480p (or 576p) and 
480i (or 576i)
[ VIDEO OUT ]: 480i (or 576i)

HT805TQ-AL_DDZALLK_ENG_9726.indd19   192010-05-24   ¿ÀÈÄ 1:53:28 
						

							
0Installation
Installation	3

Optional Equipment 
Connection
AUX In Connection
Connect an Output of auxiliary device to the 
AUX (L/R) INPUT Connector.
AUX In Connection
Unit
Red
White
To the audio output jacks of your component  (TV, VCR, etc.)
NOTE
If your TV has only one output for audio (mono), connect it to the left (white) audio jack on the unit.
AUDIO (PORT. IN) In 
Connection
Connect an output of portable device (MP3 
or PMP etc) to the AUDIO (PORT. IN) input 
connector. 
PORT.IN Connection
MP3 player, etc...
Listening to music from your 
portable player or external 
device
The unit can be used to play the music from 
many types of portable player or external 
devices.
1. Connect the portable player to the  
PORT.IN(PORTABLE IN) connector of the 
unit.
Or
  Connect the external device to the AUX 
connector of the unit.
2. Turn the power on by pressing 1 (POWER).
3.  Select the PORTABLE or AUX (L/R) INPUT 
function by pressing t RADIO&INPUT.
4.  Turn on the portable player or external 
device and start it playing.

HT805TQ-AL_DDZALLK_ENG_9726.indd20   202010-05-24   ¿ÀÈÄ 1:53:28