LG Hs101 Projector User Manual

							Function
21
Flip Vertical Function
* This function reverses the projected image vertically.
* When you hang the projector upside down from the ceiling , 
you will need to reverse  the image vertically and horizontally.
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the         menu.
2. Press the  
D, Ebutton to selectFlip Verticalitem.
3. Press the 
AOKbutton to see reversed image.
Each time you press the AOKbutton, the image will be reversed.To exit the menu display, repeatedly press the MENUbutton(      ).
1. Press the MENUbutton(       ) and then use F, Gbutton to select
the         menu.
2. Press the 
D, Ebutton to select Keystoneitem.
3. Press the 
F, Gbutton to make desired adjustments.
Keystonecan be adjusted from -50 to +50.To exit the menu display, repeatedly press the MENUbutton(      ).
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystonefunction when you can’t get the best angle of projection.
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the         menu.
2. Press the  
D, Ebutton to selectLED Modeitem.
3. Press the 
F, Gbutton to select Normal or Dark.
To exit the menu display, repeatedly press the MENUbutton(      ).
LED Mode Function
Keystone            0
LED Mode
Altitude Mode
FGNormal
MENU Prev.          Move          AdjustD
EFG
FGNormal
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the         menu.
2. Press the  
D, Ebutton to selectAltitude Modeitem.
3. Press the 
F, Gbutton to select Normal or High.
For locations over sea level of 1250m, it is recommended to use the
High Altitude Mode.  
When you use the projector in High Altitude Mode, the fan speed
becomes faster to increase the perfomance of the cooling system,
which can increase the noise level. 
To exit the menu display, repeatedly press the MENUbutton(      ).
Altitude Mode Function
Language
ARC
Flip Horizontal
Flip VerticalFGEnglish
FG4 : 3
to Flip
MENU Prev.          Move          OKD
E
Keystone            0
LED Mode
Altitude Mode
FGNormal
MENU Prev.          Move          SelectD
EFG
FGNormal
Keystone            0
LED Mode
Altitude Mode
FGNormal
MENU Prev.          Move          SelectD
EFG
FGNormal 
						

							Function
22
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the      menu.
2. Press the 
D, Ebutton to select Auto configureitem.
3. Press the 
AOKbutton.Image positioning and synchronization are automatically adjusted.
4. If any more manual adjustement is needed according to the vari-
ous PC mode inputs even after the auto-correction, execute
Clock, Phase, Horizontal andVertical function in       menu.
In certain circumstances, you can’t get the best picture quality by
only using auto-correction.
To exit the menu display, repeatedly press the MENUbutton(      ).
Auto Configure Function
* This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization
of the image. 
* Auto Tracking function works in RGB PC input only.
Screen Menu Options
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the      menu.
2. Press the 
D, Ebutton to select Phaseitem.
3. Press the  
F, G button to make desired adjustments.
Phaseadjustment range is 0 ~ 31.To exit the menu display, repeatedly press the MENUbutton(      ).The variable range can be different depends on input resolutions. 
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the         menu.
2. Press the 
D, Ebutton to select Clockitem.
3. Press the  
F, G button to make desired adjustments.
Clockadjustment range is -25 ~ +25.To exit the menu display, repeatedly press the MENUbutton(      ).The variable range can be different depends on input resolutions. 
Using Clock Function
Using Phase Function
Auto configure           
Clock                      0
Phase                     4
Horizontal                0
Vertical                            0  
Auto configure           
Clock                      0
Phase                     4
Horizontal                0
Vertical                            0  
MENU Prev.          Move          AdjustD
EFG
MENU Prev.          Move          AdjustD
EFG
Auto configure           
Clock                      0
Phase                     4
Horizontal                0
Vertical                            0  
MENU Store          Move          OKD
E
Press OK to start  
						

							Function
23
1. Press the MENUbutton(      ) and then use D, Ebutton to select
the         menu.
2. Press the 
D, Ebutton to select Horizontalitem.
3. Press the  
F, G button to make desired adjustments.
Horizontaladjustment range is -50 ~ +50.To exit the menu display, repeatedly press the MENUbutton(      ).The variable range can be different depends on input resolutions. 
1. Press the MENUbutton(      ) and then use D, Ebutton to select
the         menu.
2. Press the  
D, Ebutton to select Verticalitem.
3. Press the  
F, G button to make desired adjustments.
Verticaladjustment range is -50 ~ +50.To exit the menu display, repeatedly press the MENUbutton(      ).The variable range can be different depends on input resolutions. 
Using Vertical Function
Using Horizontal Function
Auto configure           
Clock                      0
Phase                     4
Horizontal                0
Vertical                            0  
Auto configure           
Clock                      0
Phase                     4
Horizontal                0
Vertical                            0  
MENU Prev.          Move          AdjustD
EFG
MENU Prev.          Move          AdjustD
EFG 
						

							Information
24
Supported Monitor Display
Component-*1 RGB(DTV)-*2 HDMI(DTV)-*3 Signal 
* Cable type
1- RGB to Component Cable
2- Computer Cable
3- HDMI Cable
* Recomended 720p for a better image. 
NTSC(60Hz)480i
480p
720p
1080i
PAL(50Hz)576i
576p
720p
1080iO
O
O
O
O
O
O
OX
O
O
O
X
O
O
OX
O
O
O
X
O
O
O
* The following table lists the display formats supported by the projector.
* If the projector does not support the input signal, “Out of Range” message appears on the screen.
* The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor)
* The Synchronization input form for horizontal and vertical frequencies are Separate.
* According to PC, the optimum vertical frequency may not be displayed up to the optimum frequency of set in ‘Registration information (Display
registration information)’. (ex, The optimum vertical frequency may be displayed up to 85Hz or under in the resolution of 640X480 or 800X600.)
* In case of the use of HDMI to HDMI cable, PC shall not be supported. 
Maintenance
Cleaning the lens
If there is any dust or stain on the surface of the lens, you must always clean the lens. Use an air sapray or cleaning cloth for product exterior, provid-
ed with the product, to lightly clean the product. When you want to remove dust or stain on the lens, use the air spray or choth for product exterior, pro-
vided with the product, with neutral detergent and water.
Cleaning the Projector Case
To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with polish cloth provided. When you want to remove
the dust or stain on the lens, use the cloth for product exterior, provided with the product.
Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored. * The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear  on the screen. If any parts need to be
replaced, contact your dealer.  When cleaning any part of the projector, always turn the power off and unplug the projector first. Sources                      Format                        Vertical Freq.(Hz)            Horizontal Freq.(kHz) 
						

							Information
25
Specifications
Operating Condition
MODEL
Resolution
Horizontal / Vertical Ratio
DLP panel size
Screen size
(Projection distance)
Projection OFF SET
Video compatibility
Power
AC-DC Adapter
Height(mm/inches)
Breadth(mm/inches)
Length(mm/inches)
Weight(g/pound)800(Horizontal) x 600(Vertical)pixel
4:3(horizontal:vertical)
0.55 inches
0.40 ~ 2.23m(15 ~ 80 inches)
100%
NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N
19V      , 4.74A
Lite-on, PA-1900-08
50/2.0
154/6.1
117/4.6
750/1.65HS101 (HS101-JE)
Temperature
In operation : 32~95°F(0°C~35°C)
In storage and transit : -4~140°F(-20°C~60°C)
Humidity 
In operation : 0~ 75% relative humidity by dry hygrometer
Not in operation : 0 ~ 85% relative humidity by dry hygrometer 
						

							HS101
OWNER’S MANUAL
LG  DLP  PROJECTOR LG  DLP  PROJECTOR
Please read this manual carefully before operating
your set. 
Retain it for future reference.
Record model number and serial number of the set. 
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
Model number :
Serial number :