LG Hs101 Projector User Manual

							HS101
OWNER’S MANUAL
LG  DLP  PROJECTOR LG  DLP  PROJECTOR
Please read this manual carefully before operating
your set. 
Retain it for future reference.
Record model number and serial number of the set. 
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
Model number :
Serial number : 
						

							DLP PROJECTOR DLP PROJECTOR
FCC NOTICE
• A Class A digital device
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equip-
ment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Warning
This is a class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures. 
						

							Contents
3
Contents
Safety Instructions....................................4
Names of partsMain Body .......................................................7
Connecting Part ..............................................7
Control Panel ..................................................8
Accessories .....................................................9
Optional Extras ...............................................9
Installing and CompositionInstallation Instructions ...................................10
How to install the projector using the tripod ...11
Basic Operation of the Projector .....................12
Using Kensington Security System .................13
Turning on the Projector .................................14
Turning off the Projector .................................14
Focus and Position of the Screen Image........14
Selecting source mode ...................................14
ConnectionConnecting to a Desktop PC ..........................15
Connecting to a Notebook PC ........................15
Connecting to a Video Source ........................15
Connecting to a DVD ......................................16
Connecting to a D-TV Set-Top Box ................16
Function
Video Menu Options
Adjusting Video ...............................................17
APC (Auto Picture Control) .............................17
Auto Color Temperature Control .....................18
Gamma Function ............................................18
Black level Function ........................................19
Keypad Sound Function ..................................19
Keypad LED Function .....................................19Special Menu Options
Selecting Language ........................................20
Using ARC  Function........................................20
Flip Horizontal Function ..................................20
Flip Vertical Function.......................................21
Using Keystone Function ................................21
LED Mode Function ........................................21
Altitude Mode Function ...................................21
Screen Menu Options
Auto Configure Function .................................22
Using Clock Function ......................................22
Using Phase Function .....................................22
Using Horizontal Function ...............................23
Using Vertical Function ...................................23
InformationSupported Monitor Display..............................24
Maintenance....................................................24
Specifications ..................................................25
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product. 
						

							Safety Instructions
4
Safety Instructions
Please take note of the safety instructions to prevent any potential accident or misuse of the projector.
➟Safety Instructions are given in two forms as detailed below.
WARNING: The violation of this instruction may cause serious injuries and even death.
NOTES: The violation of this instruction may cause light injuries or damage to the projector.
➟After reading this manual,  keep it in the place that the user always can contact easily.
Indoor InstallationWARNING
Do not place the Projector in direct
sunlight or near heat sources such
as radiators, fires and stove etc.
This may cause a fire hazard !
Do not place inflammable materi-
als beside the projector 
This may cause a fire hazard !
Do not allow children to hang on
the installed projector.
It may cause the projector to fall, caus-
ing injury or death.
Outdoor InstallationWARNING
Do not use the projector in a damp place such as a bathroom where it is likely to get wet.
This may cause a fire or an electric shock hazard !
PowerWARNING
Indoor InstallationNOTES
Disconnect from the mains and
remove all connections before
moving. Do not place the projector close
to sources of steam or oil such
as a humidifier.
This may create a fire hazard or an 
electric shock hazard !
Do not place the projector where
it might be exposed to dust.
This may cause a fire hazard or 
damage to the unit!
Earth wire should be connected.
If the earth wire is not connected, there is a
possible danger of electric shock caused by
the current leakage.
If grounding methods are not  possible, a
separate circuit breaker should be installed
by a qualified electrician.
Do not connect ground to telephone wires,
lightning rods or gas pipe.
The mains plug should be inserted
fully into the power outlet to avoid a
fire hazard !
This may cause a fire hazard or damage
the unit.
Do not place heavy objects on
the power cord. 
This may cause a fire or an electric 
shock hazard !
Do not block the vents of the pro-
jector or restrict air-flow in any way.
This would cause the internal tempera-
ture to increase and could cause a fire
hazard or damage to the unit!
Do not place the projector directly on a carpet, rug or place where
ventilation is restricted.
This would cause its internal temperature to increase and might create a fire
hazard or damage the unit.
When installing the projector on a
table, be careful not to place it
near the edge. 
This may cause the projector to fall 
causing serious injury to a child or
adult and serious damage to the 
projector.
Only use a suitable stand.
Only use the projector on a level
and stable surface. 
It may fall and cause injury and/or
damage to the unit.
Ensure good ventilation around the
projector. The distance between
the projector and the wall should
be more than 20cm/8 inches.
An excessive increase in its internal 
temperature may cause a fire hazard or
damage to the unit! 
						

							Safety Instructions
5
UsingWARNING
Do not place anything containing
liquid on top of the projector such
as flowerpot, cup, cosmetics or
candle.
This may cause a fire hazard or 
damage to the unit!
In case of impact shock or dam-
age to the projector switch it off
and unplug it from the mains out-
let and contact your service cen-
ter.
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not allow any objects to fall
into the projector.
This may cause an electric shock 
hazard or damage to the unit!
If water is spilt into the projector unplug it from
the mains supply outlet immediately and consult
your Service Agent. 
This may cause an electric shock hazard or damage to
the unit!
In the event that an image does not appear on the
screen please switch it off and unplug it from the
mains supply and contact your Service Agent.
This may cause a fire or an electric shock hazard or
damage to the unit!
Do not remove any covers
(except lens cover). High risk of
Electric Shock!
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is,a single outlet circuit which
powers only that appliance and has no additional outlets or branch circuits.Check the specification page
of this owners manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,loose or damaged wall outlets, extension cords,
frayed power cords,or damaged or cracked wire insulation are dangerous.Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance,and if its appearance indi-
cates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service personnel.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.Don’t look directly onto the lens
when the projector is in use. Eye
damage may occur!Do not touch metal parts during or
soon after operation since the
vents and lamp cover will remain
very hot!
PowerWARNING
Do not use too many plugs on the Mains multi-outlet.
It may result in overheating of the outlet and causes a fire hazard !
PowerNOTES
Never touch the power plug with
a wet hand
This may cause an electric shock 
hazard !
Hold the plug firmly when unplug-
ging. If you pull the cord, it may
be damaged.
This may cause a fire hazard !
Prevent dust collecting on the
power plug pins or outlet.
This may cause a fire hazard !
Do not plug when the power cord
or the plug is damaged or any
part of the power outlet is loose.
This may cause a fire or an electric
shock hazard or damage to the unit!
Ensure the power cord does not
come into contact with sharp or
hot objects such as a heater.
This may cause a fire or an electric 
shock hazard or damage to the unit!
Place the projector where people
will not trip or tread on the power
lead.
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not turn the projector On/Off by plugging-in or unplugging the power plug to the wall outlet.
(Do not use the power plug for switch.)
It may cause mechanical failure or could cause an electric shock. 
						

							Safety Instructions
6
UsingNOTES
Do not place heavy objects on
top of projector.
This may cause mechanical failure or
personal injury!
Take care not to impact the lens
particularly when moving the
projector.Do not touch the lens of the pro-
jector. It is delicate and easily
damaged.
OthersNOTES
CleaningNOTES
Contact the Service
Center once a year to
clean the internal
parts of the projector.
Accumulated dust can
cause mechanical failure.
When cleaning the plastic parts such as projector case, unplug the power and
wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet
cloth. Especially, never use cleanser (glass cleaner), automobile or industrial
shiner, abrasive or wax, benzene, alcohol etc., which can damage the 
product. Use an air spray or soft cloth that is moist with a neutral detergent
and water for removing dust or stains on the projection lens.
It can cause fire, electric shock or product damage (deformation, corrosion and damage).
Do not use any sharp tools on the projector as this will damage the casing.
CleaningWARNING
Do not use water while cleaning
the projector
This may cause damage to the 
projector or an electric shock hazard.
In the unlikely event  of smoke or
a strange smell from the projector,
switch it off , unplug it from the
wall outlet and contact your 
dealer or service centre.
This may cause a fire or an electric
shock hazard or damage to the unit!
Use an air spray or soft cloth that
is moist with a neutral detergent
and water for removing dust or
stains on the projection lens.
OthersWARNING
Do not attempt to service the projector yourself. Contact your dealer or service centre.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty !
Never touch the wall outlet when
there is leakage of gas, open the
windows and ventilate.
It can cause a fire or a burn by a
spark.
Do not drop the projector or allow
impact shock.
This may cause mechanical failure or
personal injury !
Don’t look at laser beam directly
as it can cause eye damage!
UsingWARNING
Be sure to unplug if the projector is not to be used for a long period.
Accumulated dust may cause a fire hazard or damage to the unit! 
						

							Names of parts
7
Names of parts
Main Body
Connecting Part
Control panel
*The projector is manufactured using high-precision technology. You may, however, see on the Projector 
screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the 
manufacturing process and does not always indicate a malfunction.
Focus ring
DIGITAL VIDEOSVC Only
RGB IN (PC/DTV) A/V IN
DC IN Kensington Security 
System Connector
(Refer to page 13)
* What is the DIGITAL VIDEOinput?
This is the input terminal to receive and display the digital video signal from the HDMI jack.  
						

							Names of parts
8
Control Panel
SOURCE SOURCE
POWER Button Turn ON/OFF the projector.MENU ButtonSelects or closes menus.
/ / / ButtonAdjusts functions of menus.
SOURCE ButtonSwitches to RGB, Digital Video, Video mode.
A OK ButtonChecks present mode and 
saves the change of functions. 
						

							Names of parts
9
Accessories
Optional Extras 
* Contact your dealer to purchase these items.Power Cord 
Owner’s manual
Computer Cable
Projection Screen 
HDMI CableComponent Cable CD Owner’s manual
RGB to Component Cable
A/V Cable
Polishing Cloth
Adapter
Portable bag 
						

							Installing and Composition
10
Installing and Composition
Provide proper ventilation for this projector.
The projector is equipped with ventilationholes(intake)
on the bottom and ventilation holes(exhaust) on the front.
Do not block or place anything near these holes, or inter-
nal heat build-up may occur, causing picture degradation
or damage to the projector.
Place this projector in adequate temperature and humidity conditions.
Install this projector only in a location where adequate temperature and humidity is available. (refer p.25)
Do not place the projector on a carpet, rug or other
similar surface. It may prevent a adequate ventilation
of the projector bottom. This product should be
mounted to a wall or ceiling only.
*Don’t place the projector in the following conditions. It may cause malfunction or product damage.
Never push projector or spill any kind of liquid into the
projector.Leave an adequate distance(30cm/12 inches or
more) around the projector.
Don’t place the projector where it can be covered with dust.
This may cause overheating of the projector.
Do not obstruct the slots and openings of the projector. This may cause overheating and create a fire
hazard.
The projector is manufactured using high-precision technology. You may, however, see tiny black points
and/or bright points (red, blue, or green) that continuously appear on the projector Screen. This is a nor-
mal result of the manufacturing process and does not indicate a malfunction.
To display DTV programs, it is necessary to purchase a DTV receiver (Set-top Box) and connect it to the
projector.
If there is no input signal, the Menu will not be displayed on screen.
Installation Instructions
In high altitude environments, set the mode to High Altitude mode before using the product.
For locations over sea level of 1250m, it is recommended to use the High Altitude mode. (refer p.21)