LG Hs101 Projector User Manual

Installing and Composition
11
* You can install this projector using a tripod for the camara. You can assemble the projector  instead of the camera
on camera tripod.
How to install the projector using the tripod
Camera Tripod Part connected to the tripod
- If you have a camera tripod, assemble the projector to the part connecting to the camera tripod
Finished condition when projector is install on the tripodPart connected to the projector
Bottom side of Projector 

Installing and Composition
12
1. Place the projector on a sturdy and horizontal surface with the PC or AV source.
2. Place the projector with the desired distance from the screen. The distance between the projector and the screen
determines the actual size of the image. 
3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the
screen image will be crooked. If this is so then the keystone adjustment may correct this (Refer to page...

Installing and Composition
13
The projector has a ‘Kensington’Security System Connector on the back panel. Connect the ‘Kensington’
Security System cable as below.
For the detailed installation and use of the Kensington Security System, refer to the user’s guide attached
to the Kensington Security System set. 
And for further information, contact http://www.kensington.com, the internet homepage of the
Kensington company that deals with expensive electronic equipment such as notebook PCs or projec-...

Installing and Composition
14
When an image appears on the screen, check if it is in focus and fits well to the screen.
To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens.
Focus ring
Focus and Position of the Screen Image
Selecting source mode
1. Press the SOURCEbutton.
2. Each press of the
F, Gbutton changes the display as below.
RGBDigital VideoVideo
RGBF
GSelect                       OK
When you connect the RGB to Component cable to the RGB IN (PC/DTV)...

Connection
15
Connection
Connecting to a Desktop PC
* You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output. 
* Refer to page 24 for the supported monitor displays of the projector.
< How to connect >
Connect computer cable to RGB IN (PC/DTV)of the projector.
Connecting to a Notebook PC
< How to connect >
Connect computer cable to RGB IN (PC/DTV)of the 
projector.
* If you set your computer to output the signal to both the
display of your computer and the external projector, the...

Connection
16
Connecting to a DVD
< How to connect >
a. After connecting the Component cable of DVD to the RGB to
Component cable, connect it to the RGB IN(PC/DTV) termi-
nal of the projector.  
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, PB=blue, PR=red)
b. You can set the Digital video mode olny when there is a
HDMI terminal in the DVD device.  
PRPBY(R) AUDIO (L) 
* The output jacks (Y, PB, PR) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y...

Function
17
Function
Video Menu Options
* In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to
help with the Projector operation.
* If there is no input signal present, the Menu will not be displayed.
* This operating guide explains operation of RGB(PC) mode mainly.
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the        menu.
2. Press the 
D, Ebutton to select a video item you want to adjust.
3. Press the 
F, Gbutton to...

Function
18
1. Press the MENU(      )button and then use F, Gbutton to select
the         menu.
2. Press the  
D, Ebutton to selectAC Citem.
3. Press the 
F, Gbutton to make desired adjustments.
Auto Color Temperature Control
Each press of the F, Gbutton changes the screen as shown below.
 To exit the menu display, repeatedly press the MENUbutton(      ). Normal
CoolWarm
- To initialize values (reset to default settings), select the Normaloption.
1. Press the MENUbutton(      ) and then use F, Gbutton...

Function
19
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the         menu.
2. Press the 
D, Ebutton to selectBlack levelitem.
3. Press the 
F, Gbutton to select Low or High. 
This function works in the following mode : Digital VideoTo exit the menu display, repeatedly press the MENUbutton(      ). The menu is is activate/deactivate depending on the DVD setting status.Black level function is activated only when the format is set to  4:4:4 or
4:2:2 among the set value of DVD...

Function
20
Special Menu Options
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the         menu.
2. Press the  
D, Ebutton to selectLanguageitem.
3. Press the 
F, Gbutton to select the language you want to use.
On-Screen-Display (OSD) is displayed in the selected language.To exit the menu display, repeatedly press the MENUbutton(      ).
Selecting Language
1. Press the MENUbutton(      ) and then use F, Gbutton to select
the         menu.
2. Press the  
D, Ebutton to selectARCitem....