LG Hb805ph Owners Manual

21Installation
Installation
 3
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on 
the player to the corresponding input jacks on 
the TV using Y P
B PR cables. You can hear the 
sound the through the system’s speaker.
Component Connection
TV
Player
GreenBlueRed
NOTE
When you use COMPONENT VIDEO OUT 
connection, you can change the resolution for the 
output. (Refer to “Resolution setting” on page 22.)
Video Connection
Connect the VIDEO OUT jack on the player to 
the video in jack on the...

22Installation
Installation 3
Resolution Setting
The player provides several output resolutions 
for HDMI OUT and COMPONENT VIDEO OUT 
jacks. You can change the resolution using 
[Setup] menu.
1. Press HOME (
).
2. Use I
/i
 to select the [Setup] and press 
ENTER (
). The [Setup] menu appears.
3. Use U
/u
 to select [DISPLAY ] option then 
press i
 to move to the second level. 
4. Use U
/u
 to select the [Resolution] option 
then press ENTER (
) or i
 to move to the 
third level.
5. Use U
/u
 to select...

23Installation
Installation
 3
Antenna connection
Connect the supplied antenna for listening to 
the radio.
Antenna Connection
PlayerPlayer
NOTE
After connecting the FM wire antenna, keep it as 
horizontal as possible. Be sure to fully extend the 
FM wire antenna.
Connections with 
external device
AUX Connection
You can enjoy the sound of your component 
with the analogue audio output jacks from the 
speakers of the system.
Connect the analogue audio output jacks of 
your component into the AUX L/R...

24Installation
Installation 3
PORT. IN CONNECTION
You can enjoy the sound of your portable 
audio player from the speakers of the system.
Connect the headphones (or line out ) jack of 
the portable audio player into the PORT. IN 
of this unit. And then select the [PORTABLE] 
option by pressing RADIO&INPUT and ENTER 
(
).
You can also use F button on the front panel to 
select the input mode.
PORT.IN Connection
MP3 player, etc ...
 
OPTICAL IN CONNECTION
You can enjoy the sound of your component 
with the...

25Installation
Installation
 3
Connecting to your 
Home Network
This player can be connected to a local area 
network (LAN) via the LAN port on the rear 
panel.
By connecting the unit to a broadband home 
network, you have access to services such as 
software updates, BD-LIVE interactivity and 
streaming services.
Wired network connection
Connect the player’s LAN port to the 
corresponding port on your Modem or Router 
using a commercially available LAN or Ethernet 
cable (CAT5 or better with RJ45...

26Installation
Installation 3
Wired Network Setup
Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
If there is a DHCP server on the local area 
network (LAN) via wired connection, this player 
will automatically be allocated an IP address. 
After making the physical connection, a small 
number of home networks may require the 
player’s network setting to be adjusted. Adjust 
the [NETWORK] setting as follow.
1. Select [Connection Setting] option in the...

27Installation
Installation
 3
Notes on Network Connection:
•  Many network connection problems during 
set up can often be fi xed by re-setting the 
router or modem. After connecting the 
player to the home network, quickly power 
off   and/or disconnect the power cable of 
the home network router or cable modem. 
Then power on and/or connect the power 
cable again.
•  Depending on the internet service provider 
(ISP), the number of devices that can 
receive internet service may be limited by 
the...

28Installation
Installation 3
USB device 
connection
This player can play movie, music and photo 
fi les contained in the USB device.
1. Insert a USB device to the USB port until it 
fi ts into place.
USB Connection - 1
When you connect the USB device on 
the HOME menu, the player plays a music 
fi le contained in the USB storage device 
automatically. If the USB storage device is 
containing various types of fi les, a menu for 
the fi le type selection will appear.
File loading may takes few minutes...

29Installation
Installation
 3
NOTE
•  This player supports USB fl ash memory/external 
HDD formatted in FAT16, FAT32 and NTFS when 
accessing fi les (music, photo, movie). However, 
for BD-LIVE and Audio CD recording, only FAT16 
and FAT32 formats are supported. Use the USB 
fl ash memory/external HDD formatted in either 
FAT16 or FAT32 when using BD-LIVE and Audio 
CD recording.
•  The USB device can be used for the local storage 
for enjoying BD-LIVE discs with Internet.
•  This unit can support up to...

30Installation
Installation 3
Settings
Adjust the Setup Settings
You can change the settings of the player in 
the [Setup] menu.
1. Press HOME (
).
2. Use I
/i
 to select the [Setup] and press 
ENTER (
). The [Setup] menu appears.
3. Use U
/u
 to select a fi rst setup option, and 
press 
i to move to the second level.
4. Use U
/u
 to select a second setup option, 
and press ENTER (
) to move to the third 
level.
5. Use U
/u
 to select a desired setting, and 
press 
i or ENTER () to confi rm your...