LG Hb805ph Owners Manual

							21Installation
Installation
 3
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on 
the player to the corresponding input jacks on 
the TV using Y P
B PR cables. You can hear the 
sound the through the system’s speaker.
Component Connection
TV
Player
GreenBlueRed
NOTE
When you use COMPONENT VIDEO OUT 
connection, you can change the resolution for the 
output. (Refer to “Resolution setting” on page 22.)
Video Connection
Connect the VIDEO OUT jack on the player to 
the video in jack on the TV using a video cable. 
You can hear the sound through the system’s 
speakers.
Video Connection
Player
TV
Yellow
HB805PH-D0_BGBRLL_ENG_0033.indd   21HB805PH-D0_BGBRLL_ENG_0033.indd   212010-08-19    6:49:452010-08-19    6:49:45 
						

							22Installation
Installation 3
Resolution Setting
The player provides several output resolutions 
for HDMI OUT and COMPONENT VIDEO OUT 
jacks. You can change the resolution using 
[Setup] menu.
1. Press HOME (
).
2. Use I
/i
 to select the [Setup] and press 
ENTER (
). The [Setup] menu appears.
3. Use U
/u
 to select [DISPLAY ] option then 
press i
 to move to the second level. 
4. Use U
/u
 to select the [Resolution] option 
then press ENTER (
) or i
 to move to the 
third level.
5. Use U
/u
 to select the desired resolution 
then press ENTER (
) to confi rm your 
selection.
NOTE
•  If your TV does not accept the resolution you 
have set on the player, you can set resolution to 
576p as follows:
Press 
x for more than 5 seconds.
•  Since several factors aff ect the resolution of 
video output, see “Video Output Resolution” on 
page 74.
HB805PH-D0_BGBRLL_ENG_0033.indd   22HB805PH-D0_BGBRLL_ENG_0033.indd   222010-08-19    6:49:452010-08-19    6:49:45 
						

							23Installation
Installation
 3
Antenna connection
Connect the supplied antenna for listening to 
the radio.
Antenna Connection
PlayerPlayer
NOTE
After connecting the FM wire antenna, keep it as 
horizontal as possible. Be sure to fully extend the 
FM wire antenna.
Connections with 
external device
AUX Connection
You can enjoy the sound of your component 
with the analogue audio output jacks from the 
speakers of the system.
Connect the analogue audio output jacks of 
your component into the AUX L/R (INPUT ) on 
this unit. And then select the [AUX] option by 
pressing RADIO&INPUT and ENTER (
).
You can also use F button on the front panel to 
select the input mode.
AUX Connection
Red 
White 
Player
To the audio output jacks
of your component
( TV, VCR, etc.)
HB805PH-D0_BGBRLL_ENG_0033.indd   23HB805PH-D0_BGBRLL_ENG_0033.indd   232010-08-19    6:49:462010-08-19    6:49:46 
						

							24Installation
Installation 3
PORT. IN CONNECTION
You can enjoy the sound of your portable 
audio player from the speakers of the system.
Connect the headphones (or line out ) jack of 
the portable audio player into the PORT. IN 
of this unit. And then select the [PORTABLE] 
option by pressing RADIO&INPUT and ENTER 
(
).
You can also use F button on the front panel to 
select the input mode.
PORT.IN Connection
MP3 player, etc ...
 
OPTICAL IN CONNECTION
You can enjoy the sound of your component 
with the digital optical connection from the 
speakers of the system.
Connect the optical output jack of your 
component into the OPTICAL IN jacks on the 
unit. And then select the [OPTICAL IN] option 
by pressing RADIO&INPUT and ENTER 
(
). Or press OPTICAL to select directly.
You can also use F button on the front panel to 
select the input mode.
Optical Connection
To the digital
optical output jack
of your component
HB805PH-D0_BGBRLL_ENG_0033.indd   24HB805PH-D0_BGBRLL_ENG_0033.indd   242010-08-19    6:49:462010-08-19    6:49:46 
						

							25Installation
Installation
 3
Connecting to your 
Home Network
This player can be connected to a local area 
network (LAN) via the LAN port on the rear 
panel.
By connecting the unit to a broadband home 
network, you have access to services such as 
software updates, BD-LIVE interactivity and 
streaming services.
Wired network connection
Connect the player’s LAN port to the 
corresponding port on your Modem or Router 
using a commercially available LAN or Ethernet 
cable (CAT5 or better with RJ45 connector). 
Wired Network Connection
WAN
LAN 1
LAN 2
LAN 3
PC PC
Router
Broadband
Service
Player
NOTE
•  When plugging or unplugging the LAN cable, 
hold the plug portion of the cable. When 
unplugging, do not pull on the LAN cable but 
unplug while pressing down on the lock.
•  Do not connect a modular phone cable to the 
LAN port.
•  Since there are various connection 
confi gurations, please follow the specifi cations 
of your telecommunication carrier or internet 
service provider.
HB805PH-D0_BGBRLL_ENG_0033.indd   25HB805PH-D0_BGBRLL_ENG_0033.indd   252010-08-19    6:49:462010-08-19    6:49:46 
						

							26Installation
Installation 3
Wired Network Setup
Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
If there is a DHCP server on the local area 
network (LAN) via wired connection, this player 
will automatically be allocated an IP address. 
After making the physical connection, a small 
number of home networks may require the 
player’s network setting to be adjusted. Adjust 
the [NETWORK] setting as follow.
1. Select [Connection Setting] option in the 
[Setup] menu then press ENTER (
). 
2. Use U
/u
/I
/i
 to select the IP mode 
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP 
address automatically.
NOTE
If there is no DHCP server on the network and you 
want to set the IP address manually, select [Static] 
then set the [IP Address], [Subnet Mask], [Gateway] 
and [DNS Server] using U
/u
/I
/i
 and numerical 
buttons. If you make a mistake while entering a 
number, press CLEAR to clear the highlighted part.
3. Select [OK] and press ENTER () to apply 
network settings.
4. The player will ask you to test the network 
connection. Select [OK] and press ENTER 
(
) to complete the network connection.
5. If you select [ Test] and press ENTER 
(
) at step 4 above, the network 
connection status is displayed on the 
screen.
You can also test it on the 
[Connection Status] in the [Setup] menu.
HB805PH-D0_BGBRLL_ENG_0033.indd   26HB805PH-D0_BGBRLL_ENG_0033.indd   262010-08-19    6:49:462010-08-19    6:49:46 
						

							27Installation
Installation
 3
Notes on Network Connection:
•  Many network connection problems during 
set up can often be fi xed by re-setting the 
router or modem. After connecting the 
player to the home network, quickly power 
off   and/or disconnect the power cable of 
the home network router or cable modem. 
Then power on and/or connect the power 
cable again.
•  Depending on the internet service provider 
(ISP), the number of devices that can 
receive internet service may be limited by 
the applicable terms of service. For details, 
contact your ISP.
•  Our company is not responsible for 
any malfunction of the player and/or 
the internet connection feature due to 
communication errors/malfunctions 
associated with your broadband internet 
connection, or other connected equipment.
•  The features of BD-ROM discs made 
available through the Internet Connection 
feature are not created or provided 
by our company, and our company is 
not responsible for their functionality 
or continued availability. Some disc 
related material available by the Internet 
Connection may not be compatible with 
this player. If you have questions about such 
content, please contact the producer of the 
disc.
•  Some internet contents may require a 
higher bandwidth connection.
•  Even if the player is properly connected and 
confi gured, some internet contents may 
not operate properly because of internet 
congestion, the quality or bandwidth of 
your internet service, or problems at the 
provider of the content.•  Some internet connection operations may 
not be possible due to certain restrictions 
set by the Internet service provider (ISP) 
supplying your broadband Internet 
connection.
•  Any fees charged by an ISP including, 
without limitation, connection charges are 
your responsibility.
•  A 10 Base-T or 100 Base-TX LAN port is 
required for wired connection to this player. 
If your internet service does not allow for 
such a connection, you will not be able to 
connect the player.
•  You must use a Router to use xDSL service.
•  A DSL modem is required to use DSL service 
and a cable modem is required to use cable 
modem service. Depending on the access 
method of and subscriber agreement with 
your ISP, you may not be able to use the 
internet connection feature contained in 
this player or you may be limited to the 
number of devices you can connect at the 
same time. (If your ISP limits subscription 
to one device, this player may not be 
allowed to connect when a PC is already 
connected.)
•  The use of a “Router” may not be allowed 
or its usage may be limited depending on 
the policies and restrictions of your ISP. For 
details, contact your ISP directly.
• Turn off   all unused network equipment in 
your local home network. Some devices 
may generate network traffi  c.
HB805PH-D0_BGBRLL_ENG_0033.indd   27HB805PH-D0_BGBRLL_ENG_0033.indd   272010-08-19    6:49:462010-08-19    6:49:46 
						

							28Installation
Installation 3
USB device 
connection
This player can play movie, music and photo 
fi les contained in the USB device.
1. Insert a USB device to the USB port until it 
fi ts into place.
USB Connection - 1
When you connect the USB device on 
the HOME menu, the player plays a music 
fi le contained in the USB storage device 
automatically. If the USB storage device is 
containing various types of fi les, a menu for 
the fi le type selection will appear.
File loading may takes few minutes depending 
on the number of content stored in the USB 
storage device. Press ENTER (
) while [Cancel] 
is selected to stop loading.2. Select [Movie], [Photo] or [Music] using 
I
/i
, and press ENTER (
).
3. Select a fi le using U
/u
/I
/i
, and press PLAY 
or ENTER (
) to play the fi le.
You can check the space of the USB device 
on the screen.
4. Select the other mode. And withdraw the 
USB device carefully.
USB Connection - 2
HB805PH-D0_BGBRLL_ENG_0033.indd   28HB805PH-D0_BGBRLL_ENG_0033.indd   282010-08-19    6:49:462010-08-19    6:49:46 
						

							29Installation
Installation
 3
NOTE
•  This player supports USB fl ash memory/external 
HDD formatted in FAT16, FAT32 and NTFS when 
accessing fi les (music, photo, movie). However, 
for BD-LIVE and Audio CD recording, only FAT16 
and FAT32 formats are supported. Use the USB 
fl ash memory/external HDD formatted in either 
FAT16 or FAT32 when using BD-LIVE and Audio 
CD recording.
•  The USB device can be used for the local storage 
for enjoying BD-LIVE discs with Internet.
•  This unit can support up to 4 partitions of the 
USB device.
•  Do not extract the USB device during operation 
(play, etc.). 
•  An USB device which requires additional 
programme installation when you have 
connected it to a computer, is not supported.
•  USB device: USB device that support USB 1.1 
and USB 2.0.
•  Movie, music and photo fi les can be played. 
For details of operations on each fi le, refer to 
relevant pages.
•  Regular back up is recommended to prevent 
data loss.
•  If you use a USB extension cable, USB HUB or 
USB Multi-reader, the USB device may not be 
recognised.
•  Some USB device may not work with this unit.
•  Digital camera and mobile phone are not 
supported.
•  USB Port of the unit cannot be connected to PC. 
The unit cannot be used as a storage device.
HB805PH-D0_BGBRLL_ENG_0033.indd   29HB805PH-D0_BGBRLL_ENG_0033.indd   292010-08-19    6:49:472010-08-19    6:49:47 
						

							30Installation
Installation 3
Settings
Adjust the Setup Settings
You can change the settings of the player in 
the [Setup] menu.
1. Press HOME (
).
2. Use I
/i
 to select the [Setup] and press 
ENTER (
). The [Setup] menu appears.
3. Use U
/u
 to select a fi rst setup option, and 
press 
i to move to the second level.
4. Use U
/u
 to select a second setup option, 
and press ENTER (
) to move to the third 
level.
5. Use U
/u
 to select a desired setting, and 
press 
i or ENTER () to confi rm your 
selection.
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to 
your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected. 
Displays theatrical images with masking 
bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected. 
Displays pictures cropped to fi ll your TV 
screen. Both sides of the picture are cut off .
[16:9 Original]
Select when a 16:9 wide TV is connected. 
The 4:3 picture is displayed with an original 
4:3 aspect ratio, with black bars appearing 
at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. 
The 4:3 picture is adjusted horizontally (in a 
linear proportion) to fi ll the entire screen.
HB805PH-D0_BGBRLL_ENG_0033.indd   30HB805PH-D0_BGBRLL_ENG_0033.indd   302010-08-19    6:49:472010-08-19    6:49:47