LG Flatron W2753vc Users Guide

							A20
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menuDescription
DSUB/DVI input
HDMI input
DEMO
SPORTSThis is used for advertising in the store. The screen
will be divided to show the standard mode on the
left and video mode on the right so that the
consumers can check the difference after applying
the video mode. 
Select this when you watching general sports.
HDMI input
USER
...  HUE  : Adjust the screen hue.
...  SATURATION  : Adjust the screen saturation.
You can manually adjust  ACEor RCM .   (only for
DSUB/DVI input),  HUEor SATURATION (only for
HDMI input).
You can save or restore the adjusted value even
when using a different environment. 
...  ACE(Adaptive Clarity Enhancer) : Selects the clarity mode.
Not applied
Green enhance 
Flesh tone
Color Enhance
...RCM(Real Color Management) : Selects the color mode.
Not applied
Weak clarity and luminosity contrast. 
Strong clarity and luminosity contrast. 
MENU : Exit
: Decrease
: Increase
AUTO/SET: Select another sub-menu
To adjust the USER sub-menu
function,press the AUTO/SET Button.
DSUB/DVI input
 
						

							A21
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
 Is the power indicator
light on?
 Is the power indicator
flickering?
 Do you see an OUT OF
RANGE message on
the screen?
 Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings, so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message 
“OSD UNLOCKED” will appear.
Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							A22A22
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
 On the screen
background, vertical
bars or stripes are
visible.
 Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASE icon in the on 
screen display.
• Check  Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommen\
d
resolution.
If the recommended resolution (optimal resolution) is not selected, le\
tters may
be blurred and the screen may be dimmed, truncated or biased. Make sure \
to
select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), \
 and resolution mentioned above may not be supported by the video card   \
 
performance. In this case, please ask to the computer or the video card \
 
manufacturer
. 
 
						

							Troubleshooting
Have you installed the display driver?
Have you installed thedisplay driver?
Do you see anUnrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?
•  Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
 The screen color is
mono or abnormal.
 The screen blinks. •
 Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings .
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
The Audio function is not working
Picture OK & No sound.• Check whether volume is 0.
•  Check sound muted.
•  HDMI cable installed properly.
•  Head phone cable installed properly.
•  Check sound format. Not supply to compressed
sound format.
A23
 
						

							A24A24A24
Specifications                                                          \
         W2753VC
NOTEInformation in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions&Weight
Range
Power Input
Environmental
Conditions
Stand Base
Power cord 27.0 inches (68.6 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
Visible diagonal size: 68.6 cm
0.311*0.311 mm pixel pitch
Horizontal Freq.      30 - 83 kHz (Automatic)
Vertical Freq.          Analog,Digital : 56 - 75 Hz (Automatic) HDMI : 56 - 61 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On Green) 
Digital (HDCP)
Signal Input 15 pin D-Sub Connector DVI - D connector (Digital)
19 pin HDMI Connector
Input Form Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Max Analog : VESA 1920 x 1080 @60 Hz
Digital :  VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz
DDC 2B (Digital,HDMI), DDC 2AB (Analog)
On Mode :         46 W(Typ.)
Sleep Mode ≤1 W
Off Mode ≤         0.5 W
With Stand Without Stand
Width 65.27 cm / 25.69 inches 65.27 cm / 25.69 inches
Height 48.77 cm / 19.20 inches   42.33 cm / 16.66 inches
Depth 21.20 cm /   8.34 inches
       6.80 cm /   2.67 inches
Net                        6.79 kg (14.97lbs)
Tilt -5˚~15˚
Swivel                     355°
AC 100-240V~ 50/60Hz 1.5A 
Operating Conditions Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached(     ), Detached ( O )
Wall-outlet type
 
						

							A25
Specifications
Indicator
On Mode
Sleep Mode
Off ModeRed
Flicker Off
LED Color
MODE
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
* Recommend Mode
DSUB/DVI Timing
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8 480P
576P
720P
720P
1080i
1080i
1080P
1080P 31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
60
50
50
60
50
60
50
60
HDMI Timing
1
2
3
4
5
6
7
8
9
10
11
*12 720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080 31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.500
70
60
75
60
75
60
75
75
60
75
60
60
 
						

							Digitally yours