LG Flatron W2753vc Users Guide

							A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters \
of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button,  then the main menu of the OSD appears.
To access a control, use the       or       Buttons. When the icon you want
becomes highlighted, press the  AUTO/SET Button.
Use the     /        Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to  select other sub-menu items.
Push the  MENU Button once to return to the main menu to select another
function. Push the  MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making ima\
ge adjustments.
 
						

							A11
NOTEThe order of icons may differ depending on the model (A11~A20).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
   : Adjustable A : DSUB Input 
*: only for DSUB/DVI Inp\4ut D : DVI Input
** : only for HDMI Input \4 H : HDMI Input
To adjust the resolution To focus on the moving picture selected.
To control screen brightness automatically.
To mind user using time.
To control touch key distance.
To control smart key menu.
Main menu             Sub-menu             A    D     H                 \
   Reference
To adjust screen color mode
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME
BRIGHTNESS
CONTRAST
GAMMA
**BLACK LEVEL
PRESET
sRGB
6500K
9300K
RED
GREEN
BLUEHORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
OSD
POSITIONHORIZONTAL
VERTICAL
LANGUAGE
*WHITE BALANCE
**OVERSCAN
RTC
POWER INDICATOR
FACTORY RESET MOVIE
*INTERNET
**GAME
USER
*NORMAL
**STANDARD
*DEMO
**SPORTS
To adjust the image size
To adjust the volume
To adjust the brightness, contrast and
gamma of the screen
To set offset level
To costomize the color of the screen
To adjust the position of the screen
To costomize the screen status for a
users operating environment
To improve the clarity and stability of the
screen
To select or customize desired image
settings
FLATRON
F-ENGINE SETUP TRACKING COLOR PICTURE VOLUME
PHOTO 
EFFECT 4: 3 IN WIDE EZ ZOOMING
SMART
LIVE SENSOR TIME CONTROL AUTO BRIGHT
CINEMA MODE
 
						

							A12
On Screen Display(OSD) Selection and Adjustment 
Sub-menus
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name Icons
Main Menu
Button Tip
MENU        : Exit : Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
 
						

							A13
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menuDescription
BRIGHTNESS
CONTRAST 
GAMMA
BLACK LEVEL
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
You can set the offset level. If you select
HIGH, the screen will be bright and if you
select ‘LOW’, the screen will be dark. 
(only for HDMI input)
* Offset? As the criteria for video signal, it is the
darkest screen the monitor can show.
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
PICTUR\b
COLOR
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
DSUB/DVI input
HDMI input
Downloaded*from*ManualMonitor.com*Manuals 
						

							A14
On Screen Display(OSD) Selection and Adjustment 
Main menuSub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
To adjust the clearness of the
screen.
TRACKINGTR\fCKING
MENU: Exit
: Decrease
: Increase
SET : Select another sub-menu
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
 
						

							A15
Restore all factory default settings except
LANGUAGE. 
Press the       ,        buttons to reset immediately.
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
If this does not improve the screen image, restore the factory default s\
ettings. 
If necessary, perform the white balance function again. This function wi\
ll be enabled only when
the input signal is an analog signal. 
SETUPTo choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
OVERSCAN
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for DSUB input)   
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Recommend overscan function to turn
on when connect AV equipment.
POWER
INDICATOR
RTCIf you set ON, you enable the Response
Time Control function.
If you set OFF, you disable the
Response Time Control function.
S\bTUP
MENU : Exit
: Adjust
: Adjust
SET : Select another sub-menu
DSUB/DVI input
HDMI input
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF .
If you set OFF , it will go off. 
If you set ON at any time, the power
indicator will automatically be turned on.
 
						

							On Screen Display(OSD) Selection and Adjustment 
The OSD screen will appear when you press the              button on the\
 front
of the monitor.
Main menuDescription
MENU: Exit ,     : Move,     SET    : Select
CINEMA MODETo focus on the moving picture selected.
This function adjusts the brightness of areas other
than the user-selected area to provide an
environment and image quality optimized for videos
or moving picture on the web browser.  
* This function is operated only if the forteManag-er
is installed to PC.
To control screen brightness automatically.
When ON is selected, this function adjusts the
screen brightness automatically, depending on the
surrounding environment, to provide optimal viewing
conditions. When OFF is selected, this function is
turned off. 
To notify the user of a specified time.
This function notifies the user that a user-specified time
(1 or 2 hours) has passed, which is done by displaying
the Alarm OSD and the LED blinking. 
Time Options: OFF/1HOUR/2HOURS 
To turn the live sensor of the touch button LED ON or
OFF. This function senses the user’ s fingers and
turns on the button LEDs before users presses the
buttons, for easier operation. 
* LED may start to work when an electrical environment is formed (i.e. human body proximity). 
To adjust the SMART button menus.
This function adjusts AUTO BRIGHT, TIME
CONTROL and LIVE SENSOR.  
When ON is selected, AUTO BRIGHT and LIVE
SENSOR are turned on and TIME CONTROL is set
to 1HOUR. When OFF is selected, all these
functions are turned off. When AUTO BRIGHT,
TIME CONTROL and LIVE SENSOR are set
individually, each setting is changed to USER
automatically. 
AUTO BRIGHT
SMART LIVE SENSOR TIME CONTROL
A16A16
 
						

							A17
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menuDescription
EZ ZOOMING
The OSD screen will appear when you touch the  button on the left bottom of the
monitor.
EZ Zoom lowers the display’s resolution in
single-step increments. Depressing the button
once lowers the resolution by one step; while a
second button-press returns the resolution to
the original display settings. 
*This function is operated only if the
forteManager is installed to PC. 
*ForteManager is not supported in HDMI input.
4:3 IN WIDE To select the image size of the screen.
• WIDE : Switch to full screen mode according to input 
image signal.  
• 4 : 3 : Change the image signal ratio into 4:3. 
WIDE4:3
DSUB/DVI input
HDMI input
 
						

							A18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menuDescription
VOLUMETo adjust the volume of headphone/Earphone.
(Only for HDMI input)
SET
SET
PHOTO  EFFECT
•
NORMAL :
The PhotoEffect function is disabled.
• GAUSSIAN BLUR :
This option is to add the effect to the screen that
the dark and sharp image becomes brighter and
more blurred.
• SEPIA :
This option changes the screen to be Sepia tone.
The Sepia tone is brown color tone.
• MONOCHROME :
This option changed the screen to be Gray tone.
The screen image is displayed with just white,
black, gray colors.
To select the color of the screen.
MONOCHROMENORMALGAUSSIAN BLURSEPIA
*Photo Effect feature may not work in HDMI Input.
(Photo effect operate at DSUB format)
 
						

							A19
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menuDescription
The OSD screen will appear when you touch the                   button o\
n the left bottom of
the monitor.
DSUB/DVI input
HDMI input
DSUB/DVI input
HDMI input
MOVIE Select this when you are watching a video or
movie.
INTERNET
GAME
Select this when you are working on the
document (Word etc.)
Select this when you are playing a game.
NORMAL
STANDARD
Select this when you want to use the product in
the most general using environment. 
* Normal mode is when f-ENGINE is turned off.
Select this when you want to use the original
standard video.
* In the General (Standard) mode, the                        
is turned off.