LG Flatron W2443t Users Guide

							10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
Pops up the
menu screen
To make adjustments in the On Screen Display, follow these steps:
Move where
you want to
adjustSelect a
menu iconAdjust the
statusExit from the
menu screen.
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the        or       Buttons. When the icon you want
becomes highlighted, press the  AUTO/SET Button.
Use the      /     Buttonsto adjust the image to the desired level. 
Use the AUTO/SET Button to select other sub-menu items.
Press the MENU Buttononce to return to the main menu to select another
function. Press the MENU Buttontwice to exit from the OSD.1
2
3
4
 
						

							11
NOTE 
The order of icons may differ depending on the model (11~17).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu Sub-menu Description
MOVIE
INTERNET
USER
NORMAL
DEMOTo select or customize desired
image settingsF-ENGINE
LANGUAGE
OSD POSITION    
(HORIZONTAL / VERTICAL)
* WHITE BALANCE
POWER INDICATOR
FACTORY RESET
To customize the screen
status for a users operating
environmentSETUP
* HORIZONTAL
*VERTICAL
*CLOCK
*PHASE
SHARPNESS
To improve the clarity and stability
of the screen 
TRACKINGTo adjust the position of the
screen  
PRESET 
(sRGB / 6500K / 9300K)
RED
GREEN
BLUECOLORTo customize the color of the
screen
BRIGHTNESS
CONTRAST
GAMMA PICTURETo adjust the brightness,
contrast and gamma of the
screen
NORMAL 
GAUSSIAN BLUR
SEPIA
MONOCHROMEPHOTO
EFFECTTo adjust the screen color mode
4:3 IN WIDETo adjust the image size
*: Analog Input only
 
						

							12
On Screen Display(OSD) Selection and Adjustment 
The OSD screen will appear when you press the  button on the front
of the monitor.
Main menu Description
MENU: Exit
: Move
SET    : Select
4:3 IN WIDETo select the image size of the screen.
•WIDE        : Switch to full screen mode
according to input image signal.  
•4:3: Change the input image signal ratio to
4:3. 
WIDE4:3
PHOTO  
EFFECTTo select the color effects of the screen.
•NORMAL 
The PhotoEffect function is disabled.
•GAUSSIAN BLUR
This menu changes the screen to be more
colorful and smoother. 
•SEPIA
This menu changes the screen to be Sepia
tone (brown color). 
•MONOCHROME 
This menu changed the screen to be Gray
tone(black-and-white Picture) .
Use the AUTO/SET button 
to go to sub-menu. 
MONOCHROME
NORMAL
GAUSSIAN BLURSEPIA
 
						

							13
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu              Sub menu Description
To adjust the USER sub-menu function,
press the AUTO/SET Button
MOVIE
INTERNET
NORMAL
DEMO
USER
When the F-ENGINE is executed, the screen is split
to show the effects of the selected function. The active
state is to the left and the inactive state is to the right
side of the screen. Select the function you want and
press the [MENU] button to save the setting. 
F-ENGINEActive state Inactive state
The following OSD screen will appear when you press the                   button
on the front of the monitor.This feature lets you easily select the best desired
image condition optimized to the environment (ambient illumination, image
types etc).
This is under normal operating conditions.
* Normal mode is when f-ENGINE is turned off.
For moving images in videos or movies.
For text images (Word processing etc.).
USER You can manually adjust ACE or RCM. 
You can save or restore the adjusted value even 
when using a different 
condition.
Not applied
Green enhance
MENU
: Save & Exit 
,     : Move
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menuSalmon color tone
Color Enhance
• ACE (Adaptive Clarity Enhancer): Selects the clarity mode.
Not applied
Weak clarity and luminosity contrast. 
Strong clarity and luminosity contrast. 
• RCM (Real Color Management): Selects the color mode.
This is used for advertising in the store. The screen will
be divided to show the standard mode on the left and
video mode on the right so that the consumers can
check the difference after applying the video mode. 
 
						

							14
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
Press the MENUButton, then the main
menu of the OSD appears.
Main Menu
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PICTURE
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
BRIGHTNESS
CONTRAST 
GAMMATo adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
PRESET
RED
GREEN
BLUESelect the screen color. 
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
Press the      ,      buttons to reset immediately.
SETUP
MENU: Exit
: Adjust
: Adjust
SET    : Select another  
sub-menu
Main menu Sub menu Description
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
W2443S
W2443T
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal. 
 
						

							18
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
flickering?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							19
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution. 
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer.