LG Flatron W2443t Users Guide

10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
Pops up the
menu screen
To make adjustments in the On Screen Display, follow these steps:
Move where
you...

11
NOTE 
The order of icons may differ depending on the model (11~17).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu Sub-menu Description
MOVIE
INTERNET
USER
NORMAL
DEMOTo select or customize desired
image settingsF-ENGINE
LANGUAGE
OSD POSITION    
(HORIZONTAL / VERTICAL)
* WHITE BALANCE
POWER INDICATOR
FACTORY RESET
To customize the screen
status for a users operating
environmentSETUP
*...

12
On Screen Display(OSD) Selection and Adjustment 
The OSD screen will appear when you press the  button on the front
of the monitor.
Main menu Description
MENU: Exit
: Move
SET    : Select
4:3 IN WIDETo select the image size of the screen.
•WIDE        : Switch to full screen mode
according to input image signal.  
•4:3: Change the input image signal ratio to
4:3. 
WIDE4:3
PHOTO  
EFFECTTo select the color effects of the screen.
•NORMAL 
The PhotoEffect function is disabled.
•GAUSSIAN BLUR
This menu...

13
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu              Sub menu Description
To adjust the USER sub-menu function,
press the AUTO/SET Button
MOVIE
INTERNET
NORMAL
DEMO
USER
When the F-ENGINE is executed, the screen is split
to show the effects of the selected function. The active
state is to the left and the inactive state is to the right
side of the screen. Select the function you want and
press the [MENU] button to save the setting. 
F-ENGINEActive state...

14
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
Press the...

15
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PICTURE
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
BRIGHTNESS
CONTRAST 
GAMMATo adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
PRESET
RED
GREEN
BLUESelect the screen color. 
• sRGB: Set the screen color to fit the
sRGB standard...

16
On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICALTo move image...

17
On Screen Display(OSD) Selection and Adjustment 
Press the      ,      buttons to reset immediately.
SETUP
MENU: Exit
: Adjust
: Adjust
SET    : Select another  
sub-menu
Main menu Sub menu Description
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this...

18
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
flickering?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving...

19
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your...