LG Flatron W2243c Owners Manual
Have a look at the manual LG Flatron W2243c Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
15
On Screen Display(OSD) Selection and Adjustment
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
press the AUTO/SET Button
MOVIE
INTERNET
NORMAL
DEMO
USER
When the F-ENGINE is executed, the screen is split
to show the effects of the selected function. The active
state is to the left and the inactive state is to the right
side of the screen. Select the function you want and
press the [MENU] button to save the setting.
F-ENGINEActive state...](http://img.usermanuals.tech/thumb/47/52166/w64_lg_flatron_w2243c-owner-s-manual-15.png "Page 16
15
On Screen Display(OSD) Selection and Adjustment
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
press the AUTO/SET Button
MOVIE
INTERNET
NORMAL
DEMO
USER
When the F-ENGINE is executed, the screen is split
to show the effects of the selected function. The active
state is to the left and the inactive state is to the right
side of the screen. Select the function you want and
press the [MENU] button to save the setting.
F-ENGINEActive state...")
20 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator red? Is the power indicator blinking? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?• Check and see if the power cord is connected properly to the power outlet. • Pressthe Power button. • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the Specifications section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENUbutton for several seconds: the message “OSD UNLOCKED”will appear. Do you see “OSD LOCKED” when you push MENU button?
21 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.• Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V positionicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCKicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASEicon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settingsand see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
22 Troubleshooting Display image is incorrect The screen color is mono or abnormal. The screen blinks.• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an Unrecognized monitor, Plug&Play (VESA DDC) monitor found message? Have you installed the display driver?• Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. • Make sure to check if the video card supports Plug&Play function.
23 Specifications W1943TS 18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.01cm 0.30 x 0.30 mm (Pixel pitch) Display Horizontal Freq. 30 - 61 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green), DigitalSync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 HzResolution Plug&Play On Mode:21W(Typ.)Sleep Mode≤1 W Off Mode≤0.5 WPower Consumption Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 44.90 cm / 17.68 inches Height 36.10 cm / 14.21 inches Depth 18.30 cm / 7.20 inches Weight(excl. packing) 3.3 kg (7.28 lbs)Dimensions & Weight Tilt : -5˚~15˚Range AC 100-240V~ 50/60Hz 0.8A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B Without Stand Width 44.90 cm / 17.68 inches Height 29.05 cm / 11.44 inches Depth 5.85 cm / 2.30 inches NOTE Information in this document is subject to change without notice.
24 Specifications W1943SS 18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.01cm 0.30 x 0.30 mm (Pixel pitch) Display Horizontal Freq. 30 - 61 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Sync Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 HzResolution Plug&Play On Mode:21W(Typ.)Sleep Mode≤1 W Off Mode≤0.5 WPower Consumption Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 44.90 cm / 17.68 inches Height 36.10 cm / 14.21 inches Depth 18.30 cm / 7.20 inches Weight(excl. packing) 3.3 kg (7.28 lbs)Dimensions & Weight Tilt : -5˚~15˚Range AC 100-240V~ 50/60Hz 0.8A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B Without Stand Width 44.90 cm / 17.68 inches Height 29.05 cm / 11.44 inches Depth 5.85 cm / 2.30 inches NOTE Information in this document is subject to change without notice.
25 Specifications W2043TE 20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8cm 0.2766 x 0.2766 mm (Pixel pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green), DigitalSync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input Max VESA 1600 x 900 @60 Hz Recommend VESA 1600 x 900 @60 HzResolution Plug&Play On Mode:25 W(Typ.)Sleep Mode≤1 W Off Mode≤0.5 WPower Consumption Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 48.36 cm / 19.04 inches Height 37.68 cm / 14.83 inches Depth 18.30 cm / 7.20 inches Weight(excl. packing) 3.2 kg (7.05 lbs)Dimensions & Weight Tilt : -5˚~15˚Range AC 100-240V~ 50/60Hz 1.0A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B Without Stand Width 48.36 cm / 19.04 inches Height 31.40 cm / 12.36 inches Depth 6.30 cm / 2.48 inches NOTE Information in this document is subject to change without notice.
26 Specifications W2043SE 20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8cm 0.2766 x 0.2766 mm (Pixel pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green)Sync Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input Max VESA 1600 x 900 @60 Hz Recommend VESA 1600 x 900 @60 HzResolution Plug&Play On Mode:25W(Typ.)Sleep Mode≤1 W Off Mode≤0.5 WPower Consumption Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 48.36 cm / 19.04 inches Height 37.68 cm / 14.83 inches Depth 18.30 cm / 7.20 inches Weight(excl. packing) 3.2 kg (7.05 lbs)Dimensions & Weight Tilt : -5˚~15˚Range AC 100-240V~ 50/60Hz 1.0A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B Without Stand Width 48.36 cm / 19.04 inches Height 31.40 cm / 12.36 inches Depth 6.30 cm / 2.48 inches NOTE Information in this document is subject to change without notice.
27 Specifications W2243TE 21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.686cm 0.248 x 0.248 mm (Pixel pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green), DigitalSync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input Max VESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 HzResolution Plug&Play On Mode:25W(Typ.)Sleep Mode≤1 W Off Mode≤0.5 WPower Consumption Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 51.64 cm / 20.33 inches Height 39.61 cm / 15.59 inches Depth 19.80 cm / 7.80 inches Weight(excl. packing) 3.8 kg (8.38 lbs)Dimensions & Weight Tilt : -5˚~15˚Range AC 100-240V~ 50/60Hz 1.0A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B Without Stand Width 51.64 cm / 20.33 inches Height 33.27 cm / 13.10 inches Depth 6.20 cm / 2.44 inches NOTE Information in this document is subject to change without notice.
28 Specifications W2243SE 21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.686cm 0.248 x 0.248 mm (Pixel pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Sync Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input Max VESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 HzResolution Plug&Play On Mode:25W(Typ.)Sleep Mode≤1 W Off Mode≤0.5 WPower Consumption Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 51.64 cm / 20.33 inches Height 39.61 cm / 15.59 inches Depth 19.80 cm / 7.80 inches Weight(excl. packing) 3.8 kg (8.38 lbs)Dimensions & Weight Tilt : -5˚~15˚Range AC 100-240V~ 50/60Hz 1.0A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B Without Stand Width 51.64 cm / 20.33 inches Height 33.27 cm / 13.10 inches Depth 6.20 cm / 2.44 inches NOTE Information in this document is subject to change without notice.
29 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 *9720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1360 x 76831.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 47.71270 60 75 60 75 75 60 75 60 VGA VGA VESA VESA VESA MAC VESA VESA VESA W1943SS/W1943TS Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 *9720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1600 x 90031.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 60.00070 60 75 60 75 60 75 75 60 VGA VGA VESA VESA VESA VESA VESA VESA VESA W2043SE/W2043TE