LG Flatron W1943ss Users Guide

A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu...

A11
On Screen Display(OSD) Selection and Adjustment 
NOTE
The order of icons may differ depending on the model (A11~A17 ).
The following table indicates all the On Screen Display control, adjustment, and
setting menus.
Main menu             Sub-menu             A    D                        Reference
To adjust screen color mode
PRESET
OSD
POSITION
To adjust the brightness, contrast and
gamma of the screen
To costomize the color of the screen
To adjust the position of the screen
To costomize the screen...

A12
Sub-menus
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Main Menu
Button Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter...

A13
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set...

A14
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
To adjust the clearness of the
screen.
TRACKINGTRACKING
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
HORIZONTAL
VERTICALTo move...

A15
Restore all factory default settings except
LANGUAGE. 
Press the       ,        buttons to reset immediately.
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the...

A16A16
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
The OSD screen will appear when you touch the  button on the right bottom of the
monitor.
4:3 IN WIDE
To select the image size of the screen.
• WIDE:Switch to full screen mode according to
input image signal.
• 4 : 3:Change the image signal ratio into 4:3.
WIDE4:3
PHOTO  EFFECT- NORMAL:
The PhotoEffect function is disabled.
- GAUSSIAN BLUR:
This option is to add the effect to the screen
that the dark and sharp image...

A17
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
MOVIEINTERNET
NORMAL
DEMO
USER
The OSD screen will appear when you touch the                   button on the right bottom of
the monitor.
INTERNET: For text images (Word processing etc.)
MOVIE: For animation images in videos or movies 
This is under normal operating conditions.
* Normal mode is when f-ENGINE is turned off.
This is just for advertising to customer in the
shops. It’s setting is...

A18
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
●Is the power cord of the
display connected?
●Is the power indicator
light on?
●Is the power indicator
flickering?
●Do you see an OUT OF
RANGE message on
the screen?
●Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving...

A19A19
Troubleshooting
Display image is incorrect
●Display Position is
incorrect.
●On the screen
background, vertical
bars or stripes are
visible.
●Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your...