LG Flatron W1941s Users Guide

10
NOTEThe order of icons may differ depending on the model (10~15).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
TRACKING
SETUP 

Main menu Sub-menu Reference
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of the
screen
To customize the screen status
for a users operating
environment
To improve the clarity...

11
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.Sub-menus
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
Menu Name
Icons
Main Menu
Button Tip

MENU        : Exit : Adjust (Decrease/Increase)
SET        : Enter...

12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PICTURE
MENU: Exit
: Decrease
: Increase
SET     : Select another sub-menu

BRIGHTNESS
CONTRAST 
GAMMA To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.

PRESET
RED
GREEN
BLUESelect the screen color. 
•  sRGB: Set the screen color to fit the
sRGB...

13
On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET     : Select another sub-menu

CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICAL To move image...

14
On Screen Display(OSD) Selection and Adjustment 
Press the      ,      buttons to reset immediately.
If this does not improve the screen image, restore the factory default s\
ettings. If necessary,
perform the white balance function again.
SETUP

MENU : Exit
: Adjust
: Adjust
SET     : Select another  
sub-menu

Main menu Sub menu Description

To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
If the...

15
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu              Sub menu Description
To adjust the USER sub-menu
function, press the  SET Button

MOVIE
INTERN
ET
NORMAL
DEMO

USER

When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side. Press the SET
button to use the adjusted screen.
FLATRON F-ENGINE
Screen when applied Screen when not...

16
Troubleshooting

No image appears
Check the following before calling for service.

No image appears

Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
 Is the power indicator
light on?
 Is the power on and the
power indicator blue or
green?
 Is the power indicator
amber?
 Do you see an OUT OF
RANGE message on
the screen?
 Do you see a CHECK
SIGNAL CABLE
message on the
screen?•  Check and see if the power cord is connected
properly to the power outlet.
•...

17
Troubleshooting

Display image is incorrect
Display Position is
incorrect.
 On the screen
background, vertical
bars or stripes are
visible.
 Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the  H position and V position icon
in the on screen display.
• Press the  AUTO/SET button to automatically
adjust...

18
Troubleshooting

Have you installed the display driver?
Have you installed thedisplay driver?
Do you see anUnrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?
•  Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.

Display image is incorrect
 The screen color is
mono or abnormal.
 The...

Specifications                                                          \
W1542S

19
NOTEInformation in this document is subject to change without notice.

Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions& Weight
Range
Power Input
Environmental
Conditions
Stand Base
Power cord 15 inches (38.1 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating 
Visible diagonal size: 38.1 cm
0.2595*0.2595 mm pixel pitch
Horizontal Freq. 30 - 61 kHz (Automatic)
Vertical Freq. 56 - 75...