LG Flatron W1941s Users Guide

Make sure to read the Important Precautions before using the product. 
Keep the Users Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
W1542S
W1742S
W1941S
User’s Guide
 

1
This unit has been engineered and manufactured to ensure your personal s\
afety,
however improper use may result in potential electrical  shock or fire h\
azards. In
order to allow the proper operation of all safeguards incorporated in th\
is display,
observe the following basic rules for its installation, use, and servici\
ng.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not...

2
Important Precautions
Do not use this display near water such as near a bathtub, washbowl, kit\
chen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release
of heat generated during operation. If these openings are blocked, built\
-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa\
, rug, etc.
Place the...

3
Connecting the Display
IMPORTANTThis illustration depicts the general model of connection. Your monitor \
may differ from the
items shown in the picture.
Do not carry the product upside down holding only the stand base. The pr\
oduct may fall and
get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off. 
Connecting the stand 
4.Tie down the Base Lock to perpendicularity direction.
5.Once...

4
Connecting the Display
Disassembling the stand
1.Put a cushion or soft cloth on a flat
surface.
3.Change your lock on the monitor as it follows and turn it in the arrow d\
irection.
2.Place the monitor face down as shown
in the picture. 
If you cant release the Stand Base even the Locking Knob is at a releas\
e position,
Please push the indicated knob down and retry it.
4.Pull out the Stand Base to remove. 

Locking Knob
 

5
Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range : -5˚~20˚                            
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
5.Pushing the PUSH button, take...

6
2.Press        button on the front switch panel to turn the power on. When monitor power is turned on, the 
Self Image Setting Function is executed automatically.

Connecting the Display
NOTE‘ Self Image Setting Function’?  This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this fun\
ction automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO/SET’ Function?  When you encounter problems such as blurry...

7
Control Panel Functions
Front Panel Controls
WIDE mode 4 : 3 display mode 

4 : 3 IN WIDE
WIDE 
4 : 3 IN WIDE 4 : 3 
4 : 3 in Wide
Button
It allows you to adjust the size of screen you are watching
now. 
• WIDE  : Switch to full screen mode according to input 
image signal.  
•  4 : 3 : Change the image signal ratio into 4:3.
MENU ButtonUse this button to enter or exit the On Screen Display.

OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be...

8
Control Panel Functions
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
W1542S : 1280 x 720  
W1742S : 1440 x 900 
W1941S : 1360 x 768

ButtonsUse these buttons to select or adjust...

9
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen Display
Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available adjustments
and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button , then the main menu...