LG Flatron W1934s Users Guide

							A10
NOTE
The order of icons may differ depending on the model (A10~A14).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
PICTURE
COLOR
POSITION
TRACKING
SETUP
Main menu Sub menu                                  Reference
PRESET   sRGB
6500K
9300K
RED
GREEN
BLUE
To adjust the brightness,
contrast and gamma of the
screen
To adjust the position of the
screen To customize the color of the
screen
To customize the screen
status for a users operating
environment To improve the clarity and
stability, sharpness of the
screen BRIGHTNESS
CONTRAST
GAMMA
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
LANGUAGE
OSD 
POSITION
WHITE  BALANCE
POWER INDICATOR
FACTORY RESET
HORIZONTAL
VERTICAL
: Adjustable
 
						

							A11
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
 
						

							A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
Adjusts the brightness of the screen. 
Adjusts the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
PICTURE
PRESET
RED
GREEN
BLUESelects the color temperature. 
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Adjusts red color levels.
Adjusts green color levels.
Adjusts blue color levels.
COLOR
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
PICTURE
COLOR
 
						

							A13
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
Adjusts any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
Adjusts the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
text.
Adjust the clearness of the screen.
TRACKING
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
TRACKING
HORIZONTAL
VERTICALAdjusts the screen image left and right.
Adjusts the screen image up and down.
POSITION
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
POSITION
 
						

							A14
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
MENU: Exit
: Adjust
: Adjust
SET: Select another sub-menu
SETUP
SETUP
SETUP
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is
different the required specifications, the
color level may deteriorate due to
video signal distortion. Using this
function, the signal level is adjusted to
fit into the standard output level of the
video card in order to provide the
optimal image.
Activate this function when white and
black colors are present in the screen.   
POWER
INDICATOR
Restore all factory default settings except
LANGUAGE. 
Press the       button to reset immediately.
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
 
						

							A15
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							A16
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10. 
If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter
problems such as blurred letters, blurry screen, cut-off screen display or tilted screen.
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer
. 
 
						

							A17
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Do you see an
Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
 
						

							A18
Specifications                                          W1934S
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Range
Power Input
Environmental
Conditions
Stand Base
Power cord 19 inches (48 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
Visible diagonal size : 48 cm
0.285 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green) 
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1440 x 900 @ 75 Hz
Recommend VESA 1440 x 900 @ 60 Hz
DDC 2B
On Mode: 36W(Typ.)
Sleep Mode≤1 W
Off Mode≤1 W
With Stand Without Stand
Width 44.836 cm / 17.65 inches  44.836 cm / 17.65 inches
Height 37.575 cm / 14.79 inches 29.995 cm / 11.81 inches 
Depth 18.30 cm /     7.20 inches 6.00 cm /   2.36 inches
Weight(excl. packing) 3.2 kg (7.05 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 0.8A 
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached (     ), Detached ( O )
Wall-outlet type or PC-outlet type
 
						

							Specifications                                          W2234S
A19
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Range
Power Input
Environmental
Conditions
Stand Base
Power cord 22 inches (55.8 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
Visible diagonal size : 55.8 cm
0.282 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green) 
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1680 x 1050 @ 60 Hz
Recommend VESA 1680 x 1050 @ 60 Hz
DDC 2B
On Mode: 40W(Typ.)
Sleep Mode≤1 W
Off Mode≤1 W
With Stand Without Stand
Width 50.93 cm / 20.15 inches  50.93 cm / 20.15 inches
Height 43.13 cm / 16.98 inches 33.86 cm / 13.33 inches 
Depth 20.60 cm /   8.11 inches 6.05 cm /   2.38 inches
Weight(excl. packing) 4.7 kg (10.36 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 1.0A 
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached (     ), Detached ( O )
Wall-outlet type or PC-outlet type