LG Flatron N1941wp Users Guide
Have a look at the manual LG Flatron N1941wp Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A19 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description MOVIE INTERNET NORMAL DEMO USER INTERNET: For text images (Word processing etc.) MOVIE: For animation images in videos or movies This is under normal operating conditions. This is just for advertising to customer in the shops. It’s setting is same with Movie mode and screen is divided by half. This feature lets you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc). User You can manually adjust ACE or RCM. You can save or restore the adjusted value even when using a different environment. ...ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode. Not applied Green enhance Flesh tone Color Enhance0 1 2 3 MENU: Exit : Decrease : Increase SET: Select another sub-menu The INTERNET and NORMAL features become enabled for X-PORT input.
A20 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?• Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the Specifications section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENUbutton for several seconds: the message “OSD UNLOCKED”will appear. Do you see “OSD LOCKED” when you push MENU button?
A21 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.• Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V positionicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCKicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASEicon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).(Only for D-SUB input) Important Check Control Panel --> Display --> Settingsand see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution . (Only for D-SUB input) The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer . (Only for D-SUB input) If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
A22 Troubleshooting Display image is incorrect The screen color is mono or abnormal. The screen blinks.• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. (X-PORT support only 16bits color) - “White Balance” is performed on black/white pattern. - Check if the screen is set to normal mode. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. - Check if the screen is set to normal mode.
A23 Specifications N1642W/N1642WP Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 15.6 inches (39.6 cm) Flat Panel Active matrix-TFT LCD, Anti- Glare coating Visible diagonal size: 39.6 cm 0.252*0.252 mm pixel pitch D-SUB Horizontal Freq. 30 - 66 kHz (Automatic) Vertical Freq. 57 - 63 Hz (Automatic) D-SUB support 60Hz only(except Dos mode) X-PORT 1440 x 900 (60Hz) 1280 x 720 (60Hz) 1360 x 768 (60Hz) 800 x 600 (72Hz) 1024 x 768 (60Hz) D-SUB Signal Input 15 pin D-Sub Connector Input FormRGB Analog (0.7 Vp-p/ 75 ohm) X-PORT Signal Input X-PORT Connector Input Form X-PORT Signal Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 Hz DDC 2B (Only for D-SUB Input) On Mode: 20W(Typ.) Sleep Mode≤1 W Off Mode≤1 W With Stand Without Stand Width 38.17 cm / 15.03 inches 38.17 cm / 15.03 inches Height 32.39 cm / 12.75 inches 26.03 cm / 10.25 inches Depth 19.84 cm / 7.81 inches 5.67 cm / 2.23 inches Net 2.6 kg (5.78 lbs) Tilt -5˚~ 20˚ AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice.
A24 Specifications N1941W/N1941WP/N1941WE Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 18.51 inches (47.0 cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coating Visible diagonal size: 47.0 cm 0.30*0.30 mm pixel pitch D-SUB Horizontal Freq. 30 - 66 kHz (Automatic) Vertical Freq. 57 - 63 Hz (Automatic) D-SUB support 60Hz only(except Dos mode) X-PORT 1440 x 900 (60Hz) 1280 x 720 (60Hz) 1360 x 768 (60Hz) 800 x 600 (72Hz) 1024 x 768 (60Hz) D-SUB Signal Input 15 pin D-Sub Connector Input FormRGB Analog (0.7 Vp-p/ 75 ohm) X-PORT Signal Input X-PORT Connector Input Form X-PORT Signal Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 Hz DDC 2B (Only for D-SUB Input) On Mode: 23W(Typ.) Sleep Mode≤1 W Off Mode≤1 W With Stand Without Stand Width 44.84 cm / 17.65 inches 44.84 cm / 17.65 inches Height 35.79 cm / 14.09 inches 27.80 cm / 10.94 inches Depth 19.84 cm / 7.81 inches 5.76 cm / 2.27 inches Net 3.1 kg (6.89 lbs) Tilt -5˚~ 20˚ AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice.
A25 Specifications D-SUB Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) *Recommend Mode Indicator On Mode Sleep Mode Off ModeBlue Flicker Off LED Color MODE 1 2 3 4 *531.468 31.469 37.879 48.363 47.71270 60 60 60 60 720 x 400 640 x 480 800 x 600 1024 x 768 1360 x 768 X-PORT Preset Modes (Resolution) Display Modes (Resolution) *Recommend Mode 1 2 3 *4 5800 x 600(72Hz) 1024 x 768(60Hz) 1280 x 720(60Hz) 1360 x 768(60Hz) 1440 x 900(60Hz)
A26 Installing the Wall mount plate (Only for N1941W,N1941WP,N1941WE) Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.LG recommends that wall mounting be performed by a qualified professional installer. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1.Place the monitor with its front facing downward on a soft cloth. 2.Separate the stand by pushing the PUSH button. 3.Install the Wall mount plate. Warning: You can hurt your finger. Good Position Bad Position