LG Flatron M2380d Owners Manual

							31
EXTERNAL  EQUIPMENT  SETUP
USB SETUP
Connect the USB device to the USB IN jacks on the side of SET.
After connecting the  USB IN jacks, you use the  USB function. (► p.113)1
2
Memory StickUSB Cable
   
						

							32
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
HEADPHONE SETUP
Plug the headphone into the headphone socket. 
To adjust the  headphone volume , press the 
 + or - button. If you press the  MUTE button, the 
sound from the headphone is switched off.
1
2
You can listen the sound through the headphone.
NOTE
 ►  AUDIO menu items are disabled when connecting a headphone.
 ► Optical Digital Audio Out is not available when connecting a headphone.
!
 
						

							33
EXTERNAL  EQUIPMENT  SETUP
OPTICALDIGITAL
AUDIO OUT
ANTENNA / CABLE IN
USB IN
VIDEO
YP
BPRLR AUDIO
AUDIO
IN
(RGB/DVI)H / P
COMPONENT IN
VIDEO(MONO)  L  -  AUDIO  -  R
AV IN2
LRVIDEO
Connect the  AUDIO / VIDEO  jacks between SET and external equipment. Match the jack colours.
(Video = yellow, Audio Left = white, and Audio Right = red)
Select  AV2 input source with using the  INPUT button on the remote control.
Operate the corresponding external equipment.
Refer to external equipment operating guide.1
2
3
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
1
   
						

							34
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
PC SETUP
When using the remote control, aim it at the remote control sensor on the SET.
When connecting with a D-sub 15 pin cable
Connect the signal cable from the monitor output socket 
of the PERSONAL COMPUTER  to the PC inpu t socket 
of the SET.
Connect the audio cable from the  PC to the  AUDIO IN
(RGB/DVI)  sockets of the SET.
Press the  INPUT button to select  RGB.
Switch on the  PC, and the  PC screen appears on the set.
The set can be operated as a PC monitor.1
2
3
41
2
 ► Connect the signal input cable and tighten it up by turning in 
the direction of the arrow as shown in the figure.
NOTE!
 
						

							35
EXTERNAL  EQUIPMENT  SETUP
Connecting with an HDMI to DVI cable
Connect the DVI output of the PC to the HDMI/DVI IN1 
or  HDMI/DVI IN2  jack on the SET.
Connect  the  PC  audio  output  to  the  AUDIO  IN  (RGB/
DVI)  jack on the SET.
Turn on the PC and the SET.
Select  HDMI 1  or HDMI 2  input source using the  INPUT  
button on the remote control.1
2
3
4
12
 ► Connect the signal input cable and tighten it up by turning in 
the direction of the arrow as shown in the figure.
NOTE!
 ►If you want to use HDMI-PC mode, you must set the input label to PC mode.
   
						

							36
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
Connecting with an HDMI to HDMI cable
Connect the HDMI output of the PC to the HDMI/DVI IN1 
or  HDMI/DVI IN2  jack on the SET.
Turn on the PC and the SET.
Select  HDMI 1  or HDMI 2  input source using the  INPUT  
button on the remote control.1
2
3
1
NOTE
 ► Check  that  your  HDMI  cable  is  High  Speed  HDMI  Cable.  If  the  HDMI  cables  are  not  High  Speed HDMI 
Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
 ► If you want to use HDMI-PC mode, you must set the input label to PC mode.
!
 
						

							37
EXTERNAL  EQUIPMENT  SETUP
BACK COVER FOR WIRE ARRANGEMENT
Tie cables together with a cable management as shown in the illustration.
M2080D / M2280D
M2380D / M2780DM2080DN / M2280DN
M2380DN / M2780DN M2080DF / M2280DF
M2380DF / M2780DF
M2080DB / M2280DB
M2380DB