LG Flatron M2362dp Owners Manual

21
EXTERNAL  EQUIPMENT  SETUP
DVD SETUP
Connecting with a component cable
Connect  the  video  outputs  (Y,  PB,  PR)  of  the  DVD 
to the COMPONENT IN VIDEO jacks on the SET.
Connect  the  audio  outputs  of  the  DVD  to  the 
COMPONENT IN AUDIO jacks on the SET.
Turn on the DVD player, insert a DVD.
Select Component input  source  using  the INPUT 
button on the remote control.
Refer  to  the  DVD  player's  manual  for  operating 
instructions.
1
2
3
4
5
Component Input ports
To achieve better...

22
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
Connecting with a Euro Scart cable
Connect  the  Euro  scart  socket  of  the  DVD  to  the AV  
IN Euro scart socket on the SET.
Turn on the DVD player, insert a DVD.
Select AV input source using the INPUT button on the 
remote control.
Refer  to  the  DVD  player's  manual  for  operating 
instructions.
1
2
3
4
NOTE
 ►Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the 
AV  can  be  received....

23
EXTERNAL  EQUIPMENT  SETUP
Connecting the HDMI cable
Connect the HDMI output of the DVD to the HDMI/DVI 
IN jack on the SET
Select HDMI input source using the INPUT button on 
the remote control.
Refer  to  the  DVD  player's  manual  for  operating 
instructions.
1
2
3
NOTE
 ►Check  that  your  HDMI  cable  is  High  Speed  HDMI  Cable.  If  the  HDMI  cables  are  not  High  Speed 
HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
!
1
   

24
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
VCR SETUP
Connecting with a RF cable
 ■To avoid picture noise (interference), allow adequate distance between the VCR and SET.
Connect the ANT OUT socket of the VCR to the ANTENNA / CABLE IN socket on the SET.
Connect the antenna cable to the ANT IN socket of the VCR.
Press the PLAY button on the VCR and match the appropriate channel between the SET and VCR 
for viewing.
1
2
3
1
2Wall Jack
Antenna
 

25
EXTERNAL  EQUIPMENT  SETUP
Connecting with a Euro Scart cable
Connect  the  Euro  scart  socket  of  the  VCR  to  the AV 
IN Euro scart socket on the SET.
Insert  a  video  tape  into  the  VCR  and  press  PLAY  on 
the VCR. (Refer to the VCR owner’s manual.)
Select AV input source using the INPUT button on the 
remote control.
Refer  to  the  VCR  player's  manual  for  operating 
instructions.
1
2
3
4
NOTE
 ►Signal type RGB, i.e. the signals red, green and blue can only be selected for the...

26
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
INSERTION OF CI MODULE
Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) 
CARD SLOT of SET as shown.
For further information, see p.57
1
NOTE
 ►Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is 
not inserted properly, this can cause damage to the SET and the PCMCIA card slot.
!
 -To view the encrypted (pay) services in digital TV mode.
 -This feature is not...

27
EXTERNAL  EQUIPMENT  SETUP
DIGITAL AUDIO OUT SETUP
Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
Set the “TV Speaker option - Off ” in the AUDIO menu. (► P. 88) 
Refer to the external audio equipment instruction manual for operation.
1
2
3
CAUTION
 ►Do not look into the optical output port. Looking at the laser beam may damage your vision.
Sending the TV’s audio...

28
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
USB SETUP
Connect the USB device to the USB IN jacks on the side of SET.
After connecting the USB IN jacks, you use the USB function. (► p.109)
1
2
Memory StickUSB Cable
 

29
EXTERNAL  EQUIPMENT  SETUP
HEADPHONE SETUP
Plug the headphone into the headphone socket. 
To adjust the headphone volume, press the  + or - button. If you press the MUTE button, the 
sound from the headphone is switched off.
1
2
You can listen the sound through the headphone.
NOTE
 ► AUDIO menu items are disabled when connecting a headphone.
 ► Optical Digital Audio Out is not available when connecting a headphone.
!
   

30
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
PC SETUP
When using the remote control, aim it at the remote control sensor on the SET.
When connecting with a D-sub 15 pin cable
Connect the signal cable from the monitor output socket 
of the PERSONAL COMPUTER to the PC input socket 
of the SET.
Connect the audio cable from the PC to the AUDIO IN
(RGB/DVI) sockets of the SET.
Press the INPUT button to select RGB.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as a...