LG Flatron M208wa Users Guide

30
Adjusting the Screen
1. Press the               button and then, OKbutton to select your desired language.
2. Press the               button and then, OKbutton to select your country.
* If you want to change Language/ Country selection
1. Press the MENUbutton and then        button to select the Specialmenu. 
2. Press the     button and then       button to select Language.
The menus can be shown on the screen in the selected language.
Or, Press the     button and then        button to select Country....

31
It should be set before run auto searching.
Press the          buttons to select the TV system of the country or part of the
world from where you want to receive the TV channels. 
* Supporting channel : C(V/UHF 02~69) S(Cable 01~41)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
L:  SECAM L/L (France)
To select a programme number or enter the programe number with the
number buttons from where you want to start searching for new channels....

32
Adjusting the Screen
STATION ID set/Select the channel when using the TV 
Press thebuttons to select a TV channel to be deleted. -> 
Press the red key on the remote control  -> The background colour of 
the selected channel will change to red.
Press the Delete button one more time to delete the selected channel.
All the following channels are shifted up one position.
Press thebuttons to select a TV channel to be copied. -> 
Press the green key on the remote control. All the following channel 
numbers...

33
STATION ID set/Select the channel when using the TV 
Favourite
programme
This function lets you select your favourite programmes directly. (8 channel)
Press the                    buttons to select a channel.
* 
Yellow key (remote control) : 
Favourite Program On : Rotate favourite channel 
Favourite Program Off :  To display the previously selected TV channel.
Adjusting the Screen
Station
OK   MENU    
Auto programme
Manual programme
Programme edit
Favourite programme
Off
_ _        _ _ _ _ _
_ _...

34
Adjusting the Screen
PICTURE ID adjust the picture function(RGB/DVI)
PSM
ThePSMfunction automatically adjusts the screen
image quality.
• Dynamic
Select this option to display with a sharp image. 
• Standard
The most general and natural screen display status.
• Mild
Select this option to display with a mild image.
• Game
Select this option to enjoy dynamic image when
playing a game.
• User
Select this option to use the user-defined settings.
TheCSMfunction automatically adjusts the screen
colour set....

35
PSM
CSM
ThePSMfunction automatically adjusts the screen
image quality. 
• Dynamic
Select this option to display with a sharp image. 
• Standard
The most general and natural screen display status.
• Mild
Select this option to display with a mild image.
• Game
Select this option to enjoy dynamic image when
playing a game.
• User
Select this option to use the user-defined settings.
TheCSMfunction automatically adjusts the screen
colour set. 
• Cool
Slightly purplish white.
• Normal
Slightly bluish...

36
Adjusting the Screen
SSM
AVL
Balance
SOUND ID to adjust the sound function
The best sound tone quality will be selected automatically depending on the video type that
youre currently watching.
• Flat: The most commanding and natural audio.
• Music : Select this option to enjoy the original sound when listening to the music.
• Movie: Select this option to enjoy sublime sound.
• Sports : Select this option to watch sports broadcasting.
• User: Select this option to use the user-defined audio settings....

37
TIME ID to adjust the time function 
•In the event of power interruption (disconnection or power failure), the Clockmust be reset.
•Two hours after the set is switched on by the On timefunction it will automatically switch
back to off mode unless a button has been pressed.
•Once the Onor Off timeis set, these functions operate daily at the preset time.
•Off timefunction overrides On timefunction if they are set to the same time.
•The set must be in off mode for the On timeto work.
•On time will move...

38
Use the          buttons to select Onor Off. It can be set up so that it can only be used with
the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child locktab to the On position.
In order to unlock it, do the following :
* Push the MENUbutton on the remote control and set Child lockto the Off position.
Adjusting the Screen
SPECIAL ID to Select the special function
Language
Country
Child lock
DDC-CI
XD Demo
To choose the language in...

39
SCREEN  ID to adjust the screen function 
Auto 
config.
Manual
config.
ARC
ResetThis button is for the automatic adjustment of the screen Position, Clockand Phase.
(It is not working in RGB-DTV, DVI.)
This button is for the manual adjustment of the screen Position, Clockand Phase.
• H-Position (It is not working In DVI-PC mode.)To move the displayed image left or right.• V-Position  (It is not working In DVI-PC mode.)To move the displayed image up or down.• Clock (It is not working In RGB-DTV, DVI...