LG Flatron M1921a Safety Precautions

							
21
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently si\
nce it provides
graphical presentation. 
Note
OSD (On Screen Display) Menu 

Icon Function Description
STATION
PICTURE SOUND
TIME

Adjusting the time function. 

Adjusting the screen function. (RGB-PC, RGB-DTV only)
Adjusting the sound function.
Adjusting the picture function.
Set/Select the channel when using the TV
SPECIAL

Selecting the special function.
SCREEN
Adjusting the Screen
 
						

							
22
Adjusting the Screen
OSD (On Screen Display) Screen Tracking Order

• Use the remote control to adjust the OSD screen.
Pop up the
menu screen Move where
you want to  adjust Select a menu icon
Adjust the status
Save
adjustment Exit from the
menu screen.

MENUMENUPR
PR OK OKOKPR
PROK

Press the 
MENUButton, then the main menu of the OSD will appear.
To access a control, use the            Buttons. 
When the icon you want becomes highlighted, press the  OKButton.
Use the                         Buttons to adjust the item to the desire\
d level.
Accept the changes by pressing the  OKButton.
Exit the OSD by pressing the  MENUButton.
1
2
3
4
5
6
 
						

							
23
Adjusting the Screen
1. Press the               button and then, OKbutton to select your desired language.
2. Press the               button and then,  OKbutton to select your country.
* If you want to change Language/ Country selection
1. Press the  MENUbutton and then        button to select the  SPECIALmenu. 
2. Press the     button and then       button to select Language.
The menus can be shown on the screen in the selected language.
Or, Press the     button and then        button to select Country. 
3. Press the     button and then                button to select  your d\
esired language or country.
4. Press the  OKbutton.
5. Press the TV button to return to normal TV viewing.
Note
•   If you dont finish set up Installation Guide by pressing  MENUbutton or time out of OSD
(On Screen Display) display, it will continuously appear until complet\
ing set up whenever
the set is turned on.
•  If you select wrong local country, the teletext may not appear correctly\
 on the screen and
some problem may happen during teletext operation.
•   Hebrew is added to Country of Installation Guide according to the countr\
ies which using
Hebrew languages.

On-Screen Menu Language / Country Selection
Installation guide menu appears on product screen when it is turned on f\
or the first time.
Installation Language
MENU     OK  
English
Deutsch
Fran çais
Italiano
Espa ñol
Nederlands SvenskaNorsk Dansk
suomi
Portugu ês
Romaneste Polski
Magyar
Chesky
–”——K»…
 
						

							
24
It should be set before run auto searching.
Press the          buttons to select the TV system of the country or par\
t of the
world from where you want to receive the TV channels. 
* Supporting channel : C(V/UHF 01~69) S(Cable 01~47)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
L:  SECAM L/L (France)
To select a programme number or enter the programe number with the
number buttons from where you want to start searching for new channels.
If e.g. you want to keep the channels 1 to 10 stored earlier, enter prog\
rame
number 11. Your TV search for new channels from number 11 onwards.
* Numbers available to store : 0~99
Press OKor  button to start automatic programming. All available TV
channels will be searched and stored automatically. To stop auto
programming, press the  MENUbutton. When auto programming is
completed, the programme list menu appears.
System
Storage
from
Search
Auto programme

Press the           buttons to select the channel number or enter the
programme number with the number buttons in where you want to store
channel.
Press the         buttons to select the TV system of the country or part\
 of
the world from where you want to receive the TV channels. 
L:  SECAM L/L (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Storage
System
Manual programmeTo change the channel.
(Change each item in Manual
Program and press the MENU
button to save the settings)

STATION ID set/Select the channel when using the TV 

STATION
MENU     OK  
Auto programme
Manual programme
Programme edit
Favourite programme To set

STATION
Auto programme
Manual programme
Programme edit
Favourite programme
To set

MENU     OK  
Adjusting the Screen
 
						

							
25
Adjusting the Screen

STATION ID set/Select the channel when using the TV 
Press thebuttons to select a TV channel to be deleted. -> 
Press the red key on the remote control  -> The background colour of 
the selected channel will change to red.
Press the Delete button one more time to delete the selected channel.
All the following channels are shifted up one position.
Press the buttons to select a TV channel to be copied. -> 
Press the green key on the remote control. All the following channel 
numbers are shifted down one position.
Press the buttons to select a channel number to be moved. -> 
Press the yellow key on the remote control. -> Press the                \
    
buttons to move the TV channel to the desired channel number. -> 
Press the yellow key again to release this function. 
Press the                      buttons  to  select  a  channel  number  to  be  skipped.  -> 
Press the blue key on the remote control. The skipped TV channel is 
displayed in blue. Delete
Copy 
Move    
Skip
Press the          buttons to select  VHF/UHFfor aerial channels or  Cablefor
cable channels. If you know the channel number, enter it directly with t\
he
digit buttons 0 to 9.
To select the channel reception type. :  VHF/UHF/ Cable.
In case of poor reception, you can improve the reception by fine tuning.\
 Use
the         buttons to fine tune for the best picture and sound.
Use the           buttons to search next channel backward or forward dir\
ection.
To see the assigned channel name. 
It is possible to change the name stored in the memory or to assign a na\
me
to a TV channel which has not yet been entered. A name with up 5 letters\
 or
numbers can be given to the programme numbers 0 to 99.
Press the            buttons to move cursor to be changed.  -> Press the\
buttons to select a character.(space, number 0~9, and alphabet A~Z, +,-\
)  ->
Press  OKbutton or  MENU button.Channel
Fine
Search
Name

Programme edit

Delete Copy
Move Skip
0 ----- 5     -----
1     ----- 6     -----
2     ----- 7 -----
3     ----- 8 -----
4     ----- 9 -----
STATION
Auto programme
Manual programme
Programme edit
Favourite programme To set

programme edit

MENU     OK  MENU     OK  
 
						

							
26

STATION ID set/Select the channel when using the TV 
Favourite
programme
This function lets you select your favourite programmes directly. (8 ch\
annel)
Press the                    buttons to select a channel.* 
Yellow key (remote control) :  Rotate Favourite channel.

Favourite  programme
Off
_ _        _ _ _ _ _
_ _        _ _ _ _ _
_ _        _ _ _ _ _
_ _        _ _ _ _ _
_ _        _ _ _ _ _
_ _        _ _ _ _ _
_ _        _ _ _ _ _
_ _        _ _ _ _ _
STATION
Auto programme
Manual programme
Programme edit
Favourite programme To set

MENU     OK  MENU     OK  
Adjusting the Screen
 
						

							
27
Adjusting the Screen

PICTURE ID adjust the picture function (RGB-DTV, RGB-PC)
PSM

PICTURE
PSM
CSM
Contrast
Brightness
						

							
28
PSM

PICTURE
PSM
CSM
Contrast
Brightness
Colour
Sharpness
						

							
29
Adjusting the Screen
SSM
AVL
Balance

SOUND ID to adjust the sound function

SOUND
SSM
AVL
Balance
						

							
30

TIME ID to adjust the time function 

•In the event of power interruption (disconnection or power failure), t\
he  Clockmust be reset.
• Two hours after the set is switched on by the  On timefunction it will automatically switch
back to off mode unless a button has been pressed.
• Once the  Onor Off time is set, these functions operate daily at the preset time.
• Off time function overrides  On timefunction if they are set to the same time.
• The set must be in off mode for the  On timeto work.
• On time  will move on to auto off  if no activity is received in 2hours after set\
ting the  On time.Note
Clock
Off/On time
Auto sleep

TIME
Clock
Off time
On time
Auto sleep -- : --
This function is used to set up of current time.
You must set the time correctly before using 
On/Off timefunction.
1) Press the  MENUbutton and then use
button to select the  TIMEmenu.2) Press the button and then usebutton to select the  Clockmenu.
3) Pressbutton and then use         button to set the hour(00~23).
4) Pressbutton and then use         button to set the minutes(00~59).
The default value is -- : --.
5) Press the  OK/MENU button to save.
The  Off time automatically switches the set to off mode at the pre-set time.
1) Press the  MENUbutton and then use
button to select the  TIMEmenu. 2) Press the button and then usebutton to select  Off time or On time .3) Press the button and then usebutton to set the hour(00~23). 4) Press the button and then usebutton to set the minutes(00~59). 5) Press the button and then usebutton to select  Onor Off . 6) Only  On time function; Press the   button and thenbutton to adjust volume level
and programme number. 
7) Press the  OK/MENU button to save.
If  Auto sleep is active and there is no input signal, the set  switches to off mode
automatically after 10 minutes. ( It is not working in  PC) 1) Press the  MENUbutton and then use
button to select the Autosleepmenu. 2) Press the  button and then usebutton to select  Onor Off . 3) Press the  OK/MENUbutton to save .

MENU     OK  
Adjusting the Screen