LG Flatron M1921a Safety Precautions

							
1
Please read these safety precautions carefully before using the product.\

Precautions in installing the Product

If you ignore the caution message, you may be slightly injured or the pr\
oduct may be damaged
If you ignore the warning message, you may be seriously injured or there\
 is a possibility of
accident or death.
Keep away from heat sources like electrical heaters.- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reac\
h of children. - Anti-moisture material is harmful if swallowed. If swallowed by mistake,\
 force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Kee\
p it out of the reach of children.
Do not put heavy objects on the product or sit upon it.  - If the product collapses or is dropped, you may be injured. Children mus\
t pay particular attention.
Do not leave the power or signal cable unattended on the pathway. - The passerby can falter, which can cause electrical shock, fire, product\
 breakdown or injury.
Install the product in a neat and dry place. - Dust or moisture can cause electrical shock, fire or product damage. 
If you can smell smoke or other odors or hear a strange sound unplug the\
 power cord and contact the
service center.  - If you continue to use without taking proper measures, electrical shock \
or fire can occur.
If you dropped the product or the case is broken, turn off the product a\
nd unplug the power cord.  - If you continue to use without taking proper measures, electrical shock \
or fire can occur. Contact the service center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wir\
e into the product, or inflammable
objects such as paper and matches. Children must pay particular attentio\
n. - Electrical shock, fire or injury can occur. If a foreign object is dropp\
ed into the product, unplug the power cord and contact the service center.

Make sure the product ventilation hole is not blocked. Install the produ\
ct in a suitably wide place (more
than 10cm from the wall) - If you install the product too close to the wall, it may be deformed or \
fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curt\
ain. - The product can be deformed or fire can break out due to overheating ins\
ide the product.
Install the product on a flat and stable place that has no risk of dropp\
ing the product. - If the product is dropped, you may be injured or the product may be brok\
en.
Install the product where no EMI occurs.
Keep the product away from direct sunlight. - The product can be damaged.
Safety Precautions
Warning
Warning
Caution
Caution
 
						

							
22

Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.- You may be electrocuted or injured.
Use the rated voltage only. - The product can be damaged, or you may be electrocuted.
During a thunder or lightning storm, unplug the power cable or signal ca\
ble. - You may be electrocuted or a fire can break out.
Do not connect several extension cords, electrical appliances or electri\
cal heaters to a single outlet. 
Use a power bar with a grounding terminal designed for exclusive use wit\
h the computer. - A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pi\
n is wet or covered with dust, dry
the power plug completely or wipe dust off. - You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the po\
wer cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause el\
ectric leakage, electric shock or fire.
Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power co\
rd with excessive force or put
heavy objects on the power cord. - The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the\
 power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch \
the power cable right after
plugging into the wall input terminal. - You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure t\
hat the socket-outlet is easily
accessible after installation.
Do not unplug the power cord while the product is in use. - Electrical shock can damage the product.

Warning

Caution

Precautions in Moving the Product

Warning
Make sure to turn off the product.- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged.
Safety Precautions
 
						

							
3
Safety Precautions

Caution

Precautions in Using the Product

Warning
Do not put or store inflammable substances near the product.- There is a danger of explosion or fire due to careless handling of the i\
nflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub wi\
th soft cloth to prevent
scratching. Do not clean with a wet cloth. - The water can sink into the product, which can cause electric shock or s\
erious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to r\
elax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as\
 nail, pencil or pen, or make
a scratch on it.
Keep the proper distance from the product. - Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s G\
uide. - Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use be\
nzene, thinner or alcohol.) - Product can be deformed.

Caution
Do not shock the product when moving it.- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged product can cause electric shock or\
 fire. Contact with the service center 
for repair.
Do not disassemble, repair or modify the product at your own discretion.\
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub wi\
th soft cloth to prevent
scratching. Do not clean with a wet cloth.
Keep the product away from water. - Fire or electric shock accident can occur.
The fluorescent lamp used in this product contains a small amount of mer\
cury. 
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regula\
tions of your local authority.

On Disposal
 
						

							
4
Before Connecting to the PC
Connecting the stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 
1.Place the monitor with its front facing downward on a soft cloth.
2. Connect the Stand Base to the Stand Body and press latches at the button\
 toward each end.
3.Connect the Stand, assembled in step 2, to the Monitor Panel until you h\
ear a Click.
4.Once assembled take the monitor up carefully and face the front side
ImportantOnce you connect the stand base, try not to disconnect it.Do not carry the product upside down holding only the stand base. The pr\
oduct may
fall and get damaged or injure your foot.

Stand
Slot

Stand BodyStand Base
2.
3.
 
						

							
5
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 

Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range : -5˚~15˚                             Swivel :320˚

Before Connecting to the PC

Warning:
When adjusting the angle of the screen, do not put
your finger(s) in between the head of the monitor and
the stand body. You can hurt your finger(s).
 
						

							
6
Name and Function of the Parts

Name of the Remote Control Buttons

PR
OKPOWER
MUTE
TVINPUT
LIST MENU Q.VIEW
PR
VOL
VOL
I/II

MUTE 
POWER
TV : TV button
[TV mode]
INPUT
I/II
: Bilingual choice and sound mode selection
Press this button
[TV]
to switch from  Stereoto Mono sound in case of stereo transmission,
or from  Nicam Stereo to Nicam Mono , in case of digital transmission.
to switch from  Nicam DualIto  Nicam Dual  IIor  Nicam Dual  I+IIin
case of Nicam Dual transmission.
to choose between  DualI,  Dual  IIor  Dual  I+IIin case of bilingual
transmission : 
Dual  I sends the primary broadcast language to the loudspeakers ;
Dual  II sends the secondary broadcast language to the loudspeakers ;
Dual  I+II sends a separate language to each loudspeakers.
[AV]
In AV mode, you can select output sound for the left and 
right loudspeakers. Repeatedly press the  I/IIbutton to 
select the sound output.
L+R : Audio signal from audio L input is sent to left  loud-speaker and audio signal from audio R input is 
sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right 
loud-speakers. R+R : Audio signal from audio R input is sent to left and  right loud-speakers.
NOTE :  In case of weak stereo
sound signals, with stereo or
Nicam stereo transmission,
select mono reception.
Each time you press the Input
button it will change to 
TV           AV1            AV2                 RGB-DTV            RGB-PC.
If nothing is inputted for several
seconds the screen will
automatically move to the selected
menu. Input 
TV
AV1
AV2
RGB-DTV
RGB-PC
MENU   OK
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap. • You can use a remote control 7 meter distance and 30 degree (left/righ\
t) within the receiving
unit scope.
•  Dispose of used batteries in the recycle bin to prevent environmental p\
ollution.

Inserting batteries into remote control.
 
						

							
7
PR (          ) Buttons
Able to change channel.
VOL (          ) Buttons 
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
SSM (Sound Status Memory) ButtonUse this button to select the sound tone. Press repeatedly to select Flat, Music , Movie , Sports , Usersound tone.
PSM (Picture Status Memory) Button
Press repeatedly to select  Dynamic, Standard , Mild ,
Game or User picture mode.
Number buttons
Able to directly select and change channel.

PR
OK POWER
MUTE
TVINPUT
LIST MENU Q.VIEW
SLEEP
UPDATE SIZESSM PSM
TEXT
TIME MIX
PR
VOL
VOL
X
I/II

LIST : Programme list
To display the programme list (0~ 99).
Q.VIEW : QUICK VIEW Button
To display the previously selected TV channel 
MENU Use this button to enter the On Screen Display menu.
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.

0 ----- 5 -----
1 ----- 6 -----
2 ----- 7 -----
3 ----- 8 -----
4 ----- 9 -----
MENU        OK
SLEEP : SLEEP TimerYou can set a time period after which the 
TV / AV /RGB(PC, DTV) should switch itself to
standby.  Press the key repeatedly to select the
number of minutes.
10 20 30
60
240 180 12090_ _ _ (off)
Name and Function of the Parts
 
						

							
8
Remote Control - Using the Teletext function
Please select your local teletext language. (page 23)
If you dont, the teletext may not appear correctly on the screen.

PR
OK
LIST MENUQ.VIEW
SLEEP
UPDATE SIZE
HOLD
INDEX SSM PSM
TEXT
TIME MIX
REVEAL MODE
PR
VOL
VOL
M
X
?
i

TEXT
To select the teletext on or off. The main index page
or the last selected page appears on the screen
together with an information headline and an option
line at the bottom of the screen.
TIME
Press this button to select a sub page number.  The sub page number is displayed at the 
bottom of the screen. To hold or change the 
sub page, press the RED/GREEN,          or 
NUMBER buttons. Press again to exit this 
function. 
MIX
Display the teletext pages superimposed on the
TV picture. To switch the TV picture off press this
button again.
REVEAL
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
MODE 
The mode will be switched in the Teletext mode.

Name and Function of the Parts
Yellow key 
Favourite Program On : Rotate favourite channel 
Favourite Program Off :  To display the previously    selected TV channel.
 
						

							
9
Remote Control - Using the Teletext function
UPDATE
Press the button to appear the TV programme. 
At the top of screen indicates that you are still in
the teletext mode. Before interrupting teletext,
you may select a page number. When the page
has been found, the information line appears
briefly on your screen. Press the button again to
reappear teletext.
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size. 
HOLD
Press the button to stop the automatically rotating
of the sub pages. Press the button again to
continue the automatic rotating again.
INDEX
To display the main index.

SLEEP
UPDATE SIZE
HOLD
INDEX SSM PSM
TEXT
TIME MIX
REVEAL MODE
M
X
?
i

Name and Function of the Parts
 
						

							
10
Name and Function of the Parts

RGB(PC/DTV) INANTENNA INAUDIO
(RGB) IN
H/P
S-VIDEO
AV IN 2
AV 1(Mono)VIDEO
AUDIOLR

RGB(PC/DTV) INANTENNA INAUDIO
(RGB) IN
H/P
S-VIDEO
AV IN 2
AV 1(Mono)VIDEO
AUDIOLR

Rear View

Power Connector : Connect the power cord.
SCART Input/Output Terminal
AV Input Terminal
D-Sub Analog Signal Connector 
TV Tuner Jack : Connect the antenna.
RGB Sound Jack : Connect to the jack in the PC sound card or D-TV sound \
Output  Jack. 
Headphone/Earphone Connection Terminal