LG Flatron L245wp Users Guide

Make sure to read the Important Precautionsbefore using the product. 
Keep the Users Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
L245WP
L245WPM
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which...

Connecting the Display
A3
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand base or Removing the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2.Rotate the Stand Body as shown in figure      .
The tape and locking pin may only be removed from those monitors equipped
with a standing base when the base is pulled up.
Otherwise, you may be injured by the...

A4
Connecting the Display
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from 
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The pr\
oduct may
fall and get damaged or injure your foot.
5.Attach the monitor to the Stand Base by turning the screw to the right. \
  
Screw : Turn the screw by using the screw handle.
6.Lift and turn the monitor to face towards the front after the connection\
 is 
made to the...

A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer 
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range : -5˚~20˚                             Swivel :350˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing position,  
the forward tilt angle of the monitor should not exceed 5 degrees.
Slightly wipe...

A6
Connecting the Display
1.Lift the monitor to its highest height to utilize the Pivot function.
2.Landscape & Portrait : You can rotate the panel 90o  clockwise. 
Please be cautious and avoid contact between the monitor head and the St\
and 
Base when rotating the screen to access the Pivot function. If the monit\
or head  
touches the Stand Base, then the Stand Base could crack.
3.For detailed information, please refer to the Pivot Software CD provided\
.
Using the Pivot function
Stand sectionHead...

A7
Connecting  the speakers - The feature is only for speaker models - L245WPM
Connecting the speaker
1.Rotate the panel at an angle of 90 degrees as shown in the picture, after lifting 
the monitor to its highest height.
* Make sure the panel does not 
touch the floor when rotating.
2. Insert the projecting hook of the speaker in the direction of the monitor’s back
slot until you hear the clicking sound.  
3. After connecting the speaker, connect the Audio DC-IN cable to the DC-OUT 
socket on the back...

A8
Name and function of the Parts 
Rear View
DC-OUT HDMI/DVICOMPONENT
AUDIO
OUT
D-SUBYPRPBAC-IN
   1                          2
6
8
2
9
3451
7
AC-IN Connector : Connect the Power Cord     DC-OUT Jack 
HDMI/DVI  Signal Connector                                                            COMPONENT Input Terminal
D-SUB Analogue Signal Connector    
Kensington Security Slot
USB UP stream Port(1EA)
USB DOWN stream Port(2EA)
Audio out Jack(
Headset/Earphone/connecting terminal of the Speaker) 
12
34
5
7
8
6
9...

A9
Connecting to External Devices
1.Place the monitor in a convenient, well-ventilated location near your co\
mputer.  
To adjust height of your monitor, unlock the stand lock on top of the st\
and.
2.Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection. 
3.Connect the power cord into a proper power outlet  that is easily access\
ible and close      
to the display.
Wall-outlet type
4.Press        button on the front switch panel to turn the power on.
5.Press...