LG Flatron L227wtg Users Guide

A10
NOTEThe order of icons may differ depending on the model (A10~A15).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 
Main menu Sub-menu A      D                    Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a...

A11
On Screen Display(OSD) Selection and Adjustment 
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit : Adjust (Decrease/Increase)
SET        : Enter :...

A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.PICTURE
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish...

A13
MENU: Exit
: Decrease
: Increase
SET     : Select another sub-menu
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING
TRACKING
-+
MENU : Exit
:...

A14
On Screen Display(OSD) Selection and Adjustment 
Press the       button to reset immediately.
If this does not improve the screen image, restore the factory default s\
ettings. 
If necessary, perform the white balance function again. This function wi\
ll be enabled only when
the input signal is an analog signal. 
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of...

A15
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the  SET Button
MOVIE
TEXT
NORMAL
USER
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
FLATRON F-ENGINEScreen when applied Screen when not applied
The OSD screen will...

A16
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
●Is the power cord of the
display connected?
● Is the power indicator
light on?
● Is the power on and the
power indicator blue or
green?
● Is the power indicator
amber?
● Do you see an "OUT OF
RANGE" message on
the screen?
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?• Check and see if the power cord is connected
properly to the...

A17
Troubleshooting
Display image is incorrect
●Display Position is
incorrect.
● On the screen
background, vertical
bars or stripes are
visible.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the  H position and V position icon
in the on screen display.
• Press the  AUTO/SET button to automatically
adjust...

A18
Troubleshooting
Have you installed the display driver?
●Have you installed thedisplay driver?
●Do you see an"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
● The screen color is
mono or...

A19
Specifications                                                    
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
(without speaker)
Dimensions&Weight
Tilt Range
Swivel Range
Power Input
Environmental
Conditions
Stand Base 
Power cord 
22 inches (55.8 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
22 inches viewable
0.282*0.282 mm pixel pitch
Horizontal Freq. Analog : 28 - 83 kHz (Automatic) Digital : 28 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input...