LG Flatron L227wtg Users Guide

							Make sure to read the Important Precautions before using the product. 
Keep the User's Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
L227WT
User’s Guide
 
						

							A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being
provided by the supplier. If the power cable is faulty in any way, pleas\
e contact the
manufacturer or the nearest authorized repair service provider for a rep\
lacement.
The power supply cord is used as the main disconnection device. Ensure t\
hat the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specificat\
ions of
this manual or listed on the display. If you are not sure what type of p\
ower supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed p\
ower
cords and broken plugs. They may result in a shock or fire hazard. Call \
your service
technician for replacement.
Do not Open the Display.There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw an\
y toys
or objects on the product screen. 
It can cause injury to human, problem to product and damage the display.\
  
To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short \
period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabine\
t
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time\
, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and\
 signal
cable because it can be very dangerous. It can cause electric shock. 
Important Precautions
 
						

							A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release of
heat generated during operation. If these openings are blocked, built-up\
 heat can
cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa\
, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is p\
rovided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Main power breaker is the power cord and this breaking device must be lo\
cated at
a location where it is easy to operate.  
Do not rub or strike the Active Matrix LCD with anything hard as this ma\
y scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may\
 cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. \
If possible, use the recommended resolution to obtain the best image qua\
lity for
your LCD display. If used under any mode except the recommended resoluti\
on,
some scaled or processed images may appear on the screen. However, this \
is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on\
 the display screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to anot\
her
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mer\
cury.
Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regula\
tions of
your local authority.
 
						

							A3
Connecting the Display
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The pr\
oduct may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.
Connecting the stand 
1.Place the monitor with its front facing downward on a soft cloth.
2.Assemble the Stand Body into the product in the correct direction as sho\
wn in the picture. 
3.Assemble the Stand Base(Front, Rear) into the Stand Body in the correc\
t direction.
Stand Body
Stand Base Stand Body
Hinge Body
5.Once assembled take the monitor up carefully and face the front side
4.Insert the Cable Deco Cover in the Stand Body in the correct direction.
Stand Body
Stand Base
Cable Deco Cover Cable Deco Cover
 
						

							A4
Connecting the Display
Disassembling the stand
1.Put a cushion or soft cloth on a flat
surface.
4.Nip Latch inside, Take off the stand base from stand body.
5.Please pull the stand body lightly to separate it from the hinge body. 
2.Place the monitor face down on
the cushion or soft cloth.
3.Slide the Cable Deco Cover out from the stand body.
 
						

							A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range: -5˚~20˚ 
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing
position, the forward tilt angle of the monitor should not exceed 5 degr\
ees.
Swivel : 358˚   
358
 
						

							A6
Using the Computer
1.Make sure to turn off the computer and  product. Connect the cable as be\
low sketch map
form to .1
3.Press        button on the front switch panel to turn the power on.
When monitor power is turned on, the Self Image Setting
Function is executed automatically.
(Only Analog Mode)
NOTE‘ Self Image Setting Function’?  This function provides the user with optimal display settings.When the u\
ser connects the monitor for
the first time, this function automatically adjusts the display to optim\
al settings for individual input signals. If you want t o adjust the
monitor while in use, or wish to manually run this function once again, \
push the ‘ AUTO/SET’ button on the front panel of the monitor.
Otherwise, you may execute the ‘ Factory reset’ option on the OSD \
adjustment menu. However, be aware that this option initializ es all
the menu items except ‘Language’.
2
Connecting the Display
Wall-outlet type
Power Cord
Analog signalD-sub Digital signal
DVI
A
B
C
Connect DVI Cable
Connect Dsub Cable (PC)
Connect Dsub Cable (Mac)
PC-outlet type
Mac adapter
For Apple Macintosh use, a  separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin  2 row connector.
DVI-D(This feature is not available in all countries.)
Signal Cable
Fix the power cord & signal cable
as shown in the picture.
2.Insert the Cable Deco Cover in the Stand Body in the correct direction.
 
						

							A7
Control Panel Functions
ZOOMINGAt the current display, Use 'ez Zooming' Key, then the display
resolution is transferred to the one step low resolution.
Use 'ez Zooming' Key one more, the display is back to the
original display.
*Only One touch of ez-zoom, you can fine the best resolution
you want and it is possible to magnify the size of characters and
pictures for the old not having good eye sight, housewives not
dealing with computer well and children.
Recommend resolution are  1680 x 1050, 1440 x 900, 1280  x 1024, 1024  x 768, 800  x 600.
The setting method can differ by O/S or video card. In this case, Please\
 ask to the
computer or the video card manufacturer.
Control Function
MENU ButtonUse this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the  MENU buttonfor several seconds.
The message  "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the  MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
Front Panel Controls
 
						

							A8
Control Panel Functions
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the  AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
22 inch monitor :  1680 x 1050
Control Function
-+ ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A15.
Use this button to make D-Sub or DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub.
 -
 +
 
						

							A9
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters \
of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button , then the main menu of the OSD appears.
To access a control, use the -  or + Buttons. When the icon you want
becomes highlighted, press the  AUTO/SET Button.
Use the   - /+ Buttons to adjust the image to the desired level. Use the
AUTO/SET Button  to select other sub-menu items.
Push the  MENU Button once to return to the main menu to select another
function. Push the  MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making ima\
ge adjustments.
- + - +