LG Flatron L204wt Users Guide

							A8
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5
						

							A11
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A19.
Use this button to make D-Sub or DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub. SOURCE Hot key
:
Front Panel ControlsBack

On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Scr
A short example is given below to familiarize you with the use of the contr
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Buttonthen the main menu of the OSD appears.
To access a control, use the   ButtonsWhen the icon you want
becomes highlighted, press the AUTO/SET Button
Use Buttonsadjust the image to the desired level. Use the
AUTO/SET Button select other sub-menu items.
Push the MENU Buttononce to return to the main menu to select another
function. Push the MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.

On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD \(On Screen Display\) menu languages on the monitor may differ from the manual.
Y
using the OSD system.  Listed below ar
descriptions of the all items shown on the Menu.
Pr
Menu Name
Icons
Button T
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu

T
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
\(true color\).
Important
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
The setting method can differ by computer and O/S \(Operation System\), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer
. 

Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
*11
**12720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 105031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.29070
60
75
60
75
60
75
75
60
75
60
60
* 
Digital Recommend Mode
**Analog Recommend Mode
Indicator
On Mode
Sleep Mode
Off Modeblue
amber
Off
LED Color
MODE

Installing the W
This monitor satisfies the specifications of the  W
the inter
1.Put a cushion or soft cloth on a flat surface.2. Place the monitor face down on
the cushion or soft cloth.     
3.Hold the product as it follows and lift up the Stand slightly.
4.Change your hold on the product as it follows and turn the Stand Base in the arrow
direction.
5.Pull out the Stand to remove.
The Head part
The Stand 
base part
 
						

							A8
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5
						

							A11
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A19.
Use this button to make D-Sub or DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub. SOURCE Hot key
:
Front Panel ControlsBack

On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the    o r  Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the   /      Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Buttononce to return to the main menu to select another
function. Push the MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.

On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu

T
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
\(true color\).
Important
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
The setting method can differ by computer and O/S \(Operation System\), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer
. 

Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
*11
**12720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 105031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.29070
60
75
60
75
60
75
75
60
75
60
60
* 
Digital Recommend Mode
**Analog Recommend Mode
Indicator
On Mode
Sleep Mode
Off Modeblue
amber
Off
LED Color
MODE

Installing the W
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Put a cushion or soft cloth on a flat surface.2. Place the monitor face down on
the cushion or soft cloth.     
3.Hold the product as it follows and lift up the Stand slightly.
4.Change your hold on the product as it follows and turn the Stand Base in the arrow
direction.
5.Pull out the Stand to remove.
The Head part
The Stand 
base part
 
						

							A14
On Screen Display(OSD) Selection and Adjustment 
NOTE
The order of icons may differ depending on the model (A14~A19 ).
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 
Main menu Sub-menu A      D                    Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a user's operating
environment To improve the clarity and
stability of the screen 
BRIGHTNESS
CONTRAST
GAMMA
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
WHITE BALANCE
POWER INDICATOR
4:3 IN WIDE
FACTORY RESET
LANGUAGE
OSD         
HORIZONTAL
POSITION  VERTICAL
sRGB
6500K
9300K
: Adjustable
A : Analog Input
D : Digital Input
To select or customize 
desired image settingsFLATRON 
F-ENGINEMOVIE / TEXT
USER
NORMAL
3ownloadedAfromA@anual@onitorEcomA@anuals 
						

							A11
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A19.
Use this button to make D-Sub or DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub. SOURCE Hot key
:
Front Panel ControlsBack

On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the    o r  Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the   /      Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Buttononce to return to the main menu to select another
function. Push the MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.

On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu

T
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
\(true color\).
Important
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
The setting method can differ by computer and O/S \(Operation System\), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer
. 

Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
*11
**12720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 105031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.29070
60
75
60
75
60
75
75
60
75
60
60
* 
Digital Recommend Mode
**Analog Recommend Mode
Indicator
On Mode
Sleep Mode
Off Modeblue
amber
Off
LED Color
MODE

Installing the W
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Put a cushion or soft cloth on a flat surface.2. Place the monitor face down on
the cushion or soft cloth.     
3.Hold the product as it follows and lift up the Stand slightly.
4.Change your hold on the product as it follows and turn the Stand Base in the arrow
direction.
5.Pull out the Stand to remove.
The Head part
The Stand 
base part
 
						

							A8
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5
						

							On Screen Display(OSD) Selection and Adjustment 
A17
CLOCK 
PHASE
SHARPNESS
To minimize any vertical bars or stripes 
visible on the screen background.
The horizontal screen size will also
change. 
To adjust the focus of the display.  
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters. 
To adjust the clearness of the screen.
TRACKING
TRACKING
MENU: Exit
: Decrease
: Increase
SET     : Select another sub-menu
HORIZONTAL 
VERTICALTo move image left and right.
To move image up and down.
POSITION
POSITION
MENU : Exit
: Decrease
: Increase
SET     : Select another sub-menu
Main menu Sub menu Description
 
						

							A18
On S\freen Displ\by(OSD) Sele\u\ftion \bnd Adjustment 
Main menu Sub menu Description
If this does not im\uprove the s\freen im\bg\ue, restore the f\b\fto\ury def\bult settings. \u 
If ne\fess\bry, perform\u the white b\bl\bn\fe fun\f\ution \bg\bin. This fun\fti\uon will be en\bbled only\u when
the input sign\bl is \u\bn \bn\blog sign\bl. 
SETUPTo \fhoose the l\bngu\bg\ue in whi\fh the 
\fontrol n\bmes \bre dis\upl\byed. 
To \bdjust position o\uf the OSD window 
on the s\freen.LANGUAGE 
OSD 
POSITION 
WHITE 
BALANCE
FACTORY 
RESET
If the output of th\ue video \f\brd is diff\uerent 
the required spe\fifi\u\f\btions, the \folor
level m\by deterior\bt\ue due to video
sign\bl distortion. Us\uing this fun\ftion, the\u
sign\bl level is \bdjust\ued to fit into the
st\bnd\brd output level \uof the video \f\brd
in order to provide \uthe optim\bl im\bge.
A\ftiv\bte this fun\ftion \uwhen white \bnd
bl\b\fk \folors \bre pres\uent in the s\freen.   \u
POWER 
INDICATOR
Restore \bll f\b\ftory d\uef\bult settings ex\fep\ut 
"LANGUAGE." 
SETUP
SETUP
Use this fun\ftion to \uset the power 
indi\f\btor on the fro\unt side of the moni\utor
to  ON or OFF .
If you set  OFF, it will go off. 
If you set  ON\bt \bny time, the powe\ur
indi\f\btor will \butom\bt\ui\f\blly be turned on.
Press the       butt\uon to reset immedi\b\utely.
\bENU : Exit
: Adjust
: Adjust
SET     : Sele\ft \bnother sub-me\unu
4:3 IN WIDETo sele\ft the im\bge\u size of the s\freen.
WIDE4:3
Resolution        S\fr\ueen r\btio
1280x1024 1152x864 
1024x768800x600
640x480
720x480 5 : 4
4 : 3
4 : 3
4 : 3
4 : 3
3 : 2
* 4:3 : Depending on the input video signal ratio,    
it is automatically changed to an optimized screen  
ratio. (The 1280X1024 input signal is changed 
to 5:4 ratio and 1024X768 to 4:3.)
The input sign\bl whi\fh\u the 4:3 IN WIDE does \unot support  ' 4:3'  is the
following.   
- The 20,1 in\fh monitor is \u720x400,1280x768,1360x768, 1680x1050
3ownloadedAfromA@anual@onitorEcomA@anuals 
						

							A19
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the  SET Button
MOVIE
TEXT
NORMAL
USER
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
FLATRON F-ENGINEScreen when applied Screen when not applied
The OSD screen will appear when you touch the                         bu\
tton 
on the   right side of the monitor.
TEXT: For text images (Word processing etc.)
Select the           sub-menu using the  SET button
and save the  YESvalue using the  buttons.SAVE
MOVIE: For animation images in videos or movies 
This is under normal operating conditions.
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
User
You can manually adjust brightness, ACE or RCM. 
You can save or restore the adjusted value even 
when using a different environment. 
...(Brightness): Adjusts screen brightness....ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.
Not applied
Green enhance 
Flesh tone
Color Enhance0
1
2
3