LG Flatron L1982u Users Guide

A10
Control Panel Functions
This Indicator lights up as blue when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color will
changes to amber. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to selection an icon in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SETbutton prior to entering the On
Screen Display(OSD). This will...

A11
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the displays image size, position and operating
parameters is quick and easy with the On Screen Display Control
system(OSD). A short example is given below to familiarize you with the use
of the controls. The following section is an outline of the available
adjustments and selections you can make by using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU button, then the main...

A12
NOTE
The order of icons may differ depending on the model (A12~A16).
On Screen Display (OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 
Main menu Sub-menu A      D                    Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a...

A13
On Screen Display (OSD) Selection and Adjustment 
NOTE
The On Screen Display (OSD) menu languages displayed on the monitor may differ from
the manual.
Earlier you were introduced to the procedure for selecting and adjusting an
item using the OSD system.  Listed below are the icons, icon names, and
icon descriptions of every items that displays on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust...

A14
On Screen Display (OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
on the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.PICTURE
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish...

A15
On Screen Display (OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
This also allows you horizontal screen
size.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clarity of the screen.
TRACKING
If this does not improve the screen image, restore the factory default settings. 
If necessary,...

A16
On Screen Display (OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the SET Button
MOVIE
TEXT
NORMAL
BRIGHTNESS
ACE
1
2RCM
SAVE
USER
MENU SET
USER
When you execute F-ENGINE, two tone will appear
on the screen as shown in the picture. The applied
screen will appear on the left side, whereas the non-
applied screen will appear on the right side.Press the
SET button to use the adjusted screen.
FLATRON F-ENGINEScreen...

A17
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see an OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Adjust the brightness and the contrast.
•...

A18
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The screen color is
mono or abnormal.
The screen blinks.• Press the AUTO/SETbutton to automatically
adjust the display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
on the On Screen Display.
•...

A19
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Do you see an
Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
Monitor. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports the
Plug&Play function.