LG Flatron L197wh Users Guide

							A20
Specifications                                                          \
          
Display 
Sync Input 
Video Input 
Resolution 
Plug&Play 
Power 
Consumption 
Dimensions&Weight
Tilt/Height Range 
Power Input 
Environmental 
Conditions19 inches (48.1 4 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating 
19 inches viewable
0.294 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On Green), Digital(HDCP)
Signal Input 15 pin D-Sub Connector DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital 
Max   Analog : VESA 1440 x 900 @ 75 Hz
Digital : VESA 1440 x 900 @60 Hz
Recommend VESA 1440 x 900 @60 Hz
DDC 2B 
On Mode :      36 W(Typ.)
Sleep Mode ≤1 W
Off Mode ≤1 W
Width x Height x Depth
[1] 43.96 cm(17.31 inches) x 43.60 cm(16.95 inches) x 23.74 cm(9.35\
 inches) 
[2] 43.96 cm(17.31 inches) x 29.56 cm(11.64 inches) x 9.82 cm(3.86 \
inches)
Net 5.7 kg (12.57 lbs) 
Tilt range 0˚~30˚
Height range             121 mm / 4.76 inches
AC 100-240V~ 50/60Hz 0.8A  
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
(Width) (Depth)(Height)(Width)
(Depth)(Height)
Attached ( O ), Detached (     ) 
Wall-outlet type or PC-outlet typeStand Base 
Power cord
NOTE
Information in this document is subject to change without notice.
 
						

							A11
On Screen Display (OSD) Selection and Adjustment 
NOTE
The order of icons may differ depending on the model \(A11~A16\).
The following table indicates all the On Scr
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 
Main menu
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a users operating
environment To improve the clarity and
stability of the screen 
BRIGHTNESS
CONTRAST
GAMMA
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
WHITE BALANCE
POWER INDICATOR
4:3 IN WIDE
FACTORY RESET
LANGUAGE
OSD         
HORIZONTAL
POSITION  VERTICAL
sRGB
6500K
9300K
: Adjustable
A : Analog Input
D : Digital Input
To select or customize 
desired image settingsFLATRON 
F-ENGINEMOVIE / TEXT
USER
NORMAL

On Screen Display (OSD) Selection and Adjustment 
Press the       button to reset immediately.
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color level
may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and
black colors are present in the screen.   
POWER
INDICATOR
Restore all factory default settings except
LANGUAGE. 
SETUP
SETUP
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.


MENU: Exit
: Adjust
: Adjust
SET    : Select another  
sub-menu-+
4:3 IN WIDETo select the image size of the screen.
Main menu Sub menu Description
WIDE4:3
Resolution        Screen ratio
1280x1024
1152x864
1024x768
800x600
640x480
720x4805 : 4
4 : 3
4 : 3
4 : 3
4 : 3
3 : 2
4:3 : Depending on the input video signal ratio,    
it is automatically changed to an optimized screen 
ratio. \(The 1280X1024 input signal is changed 
to 5:4 ratio and 1024X768 to 4:3.\)
The input signal which the 4:3 IN WIDE does not support  4:3   
is the following.   
-The 19 inch monitor is 720x400,1280x768,1360x768,1440x900

Troubleshooting
No image appears
Check the following befor
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?
						

							A10
On Screen Display \(OSD\) Control Adjustment
Screen Adjustment
Making adjustments to the displays image size, position and operating
parameters is quick and easy with the On Scr
system\(OSD\). A short example is given below to familiarize you with the use
of the contr
adjustments and selections you can make by using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU button, then the main menu of the OSD appears.
To select each item in the OSD menu, use the    o r  button. When the
icon you want is highlighted, press the AUTO/SET Button.
Use the   /      buttons to adjust the image to the desired level. Use the
AUTO/SET button to select other sub-menu items.
Press the MENU buttononce to return to the main menu to select another
function. Press the MENU buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making any  image
adjustments.
A
MENU-+-+
-+
-+

On Screen Display (OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Y
using the OSD system.  Listed below ar
descriptions of the all items shown on the Menu.
Pr
Menu Name
Icons
Button T
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET            : Enter
: Select another sub-menu
-+

On Screen Display (OSD) Selection and Adjustment 
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING
TRACKING
-+
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
POSITION
POSITION
-+

Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
						

							A23
Installing the Wall mount plate
Wall mount plate(Separate purchase) 
This is stand-type or wall mount type and is 
connectable with Wall mount plate.
Please refer to the installation guide for more details,
which is provided when Wall mount plate is purchased.
This monitor satisfies the specifications of the  Wall mount plate or the 
interchange device.
1.Place  the monitor with its front facing downward on a soft cloth or a c\
ushion.
Gently hold Cover Hinge Cap with hands as shown in the picture. Then, li\
ft it up andseparate from the body.
2.Separate the stand base by using a screwdriver.
Cover Hinge Cap
3.Install the Wall mount plate.
1
212
1212
12
 
						

							A10
On Screen Display \(OSD\) Control Adjustment
Screen Adjustment
Making adjustments to the displays image size, position and operating
parameters is quick and easy with the On Screen Display Control
system(OSD). A short example is given below to familiarize you with the use
of the controls. The following section is an outline of the available
adjustments and selections you can make by using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU buttonthen the main menu of the OSD appears.
To select each item in the OSD menu, use the   buttonWhen the
icon you want is highlighted, press the AUTO/SET Button
Use buttonsadjust the image to the desired level. Use the
AUTO/SET button select other sub-menu items.
Press the MENU buttononce to return to the main menu to select another
function. Press the MENU buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making any  image
adjustments.
AUTO/SET
MENU MENU-+-+
-+
-+

On Screen Display (OSD) Selection and Adjustment 
NOTE
OSD \(On Screen Display\) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET            : Enter
: Select another sub-menu
-+

On Screen Display (OSD) Selection and Adjustment 
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING
TRACKING
-+
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
POSITION
POSITION
-+

Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
						

							Digitally yours