LG Flatron L197wh Users Guide
Have a look at the manual LG Flatron L197wh Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A10 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the displays image size, position and operating parameters is quick and easy with the On Screen Display Control system(OSD). A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make by using the OSD. To make adjustments in the On Screen Display, follow these steps: Press the MENU button, then the main menu of the OSD appears. To select each item in the OSD menu, use the o r button. When the icon you want is highlighted, press the AUTO/SET Button. Use the / buttons to adjust the image to the desired level. Use the AUTO/SET button to select other sub-menu items. Press the MENU buttononce to return to the main menu to select another function. Press the MENU buttontwice to exit from the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making any image adjustments. AUTO/SET MENU MENU-+-+ -+ -+ On Screen Display (OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name Icons Button Tip PICTURE Sub-menus MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu -+ On Screen Display (OSD) Selection and Adjustment MENU: Exit : Decrease : Increase SET : Select another sub-menu Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To adjust the clearness of the screen. TRACKING TRACKING -+ MENU: Exit : Decrease : Increase SET : Select another sub-menu HORIZONTAL VERTICALTo move image left and right. To move image up and down. POSITION POSITION -+ Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.• Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V positionicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCKicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASEicon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Important Check Control Panel --> Display --> Settingsand see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. Reasons for Recommending Optimal Resolution: The aspect ratio is 16:10. If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter problems such as blurred letters, blurry screen, cut-off screen display or tilted screen. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer . Specifications Signal Connector Pin Assignment 18 9 1724 16 Pin Signal(DVI-D) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T. M. D. S. Data2- T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4- T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync. T. M. D. S. Data1- T. M. D. S. Data1+ T. M. D. S. Data1/3 Shield T. M. D. S. Data3- T. M. D. S. Data3+ +5V Power Ground (return for +5V, H. Sync. and V. Sync.) Pin Signal(DVI-D) 16 17 18 19 20 21 22 23 24Hot Plug Detect T. M. D. S. Data0- T. M. D. S. Data0+ T. M. D. S. Data0/5 Shield T. M. D. S. Data5- T. M. D. S. Data5+ T. M. D. S. Clock Shield T. M. D. S. Clock+ T. M. D. S. Clock- T. M. D. S. (Transition Minimized Differential Signaling) DVI-D Connector Specifications Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. 1 2
A11 On Screen Display (OSD) Selection and Adjustment NOTE The order of icons may differ depending on the model (A11~A16). The following table indicates all the On Screen Display control, adjustment, and setting menus. To adjust the brightness, contrast and gamma of the screenPICTURE COLOR POSITION TRACKING SETUP Main menu Sub-menu A D Reference PRESET RED GREEN BLUE To adjust the position of the screen To customize the color of the screen To customize the screen status for a users operating environment To improve the clarity and stability of the screen BRIGHTNESS CONTRAST GAMMA HORIZONTAL VERTICAL CLOCK PHASE SHARPNESS WHITE BALANCE POWER INDICATOR 4:3 IN WIDE FACTORY RESET LANGUAGE OSD HORIZONTAL POSITION VERTICAL sRGB 6500K 9300K : Adjustable A : Analog Input D : Digital Input To select or customize desired image settingsFLATRON F-ENGINEMOVIE / TEXT USER NORMAL On Screen Display (OSD) Selection and Adjustment Press the button to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal. SETUP To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen.LANGUAGE OSD POSITION WHITE BALANCE FACTORY RESET If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. POWER INDICATOR Restore all factory default settings except LANGUAGE. SETUP SETUP Use this function to set the power indicator on the front side of the monitor to ONor OFF. If you set OFF, it will go off. If you set ONat any time, the power indicator will automatically be turned on. MENU: Exit : Adjust : Adjust SET : Select another sub-menu-+ 4:3 IN WIDETo select the image size of the screen. Main menu Sub menu Description WIDE4:3 Resolution Screen ratio 1280x1024 1152x864 1024x768 800x600 640x480 720x4805 : 4 4 : 3 4 : 3 4 : 3 4 : 3 3 : 2 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. \(The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3.\) The input signal which the 4:3 IN WIDE does not support 4:3 is the following. -The 19 inch monitor is 720x400,1280x768,1360x768,1440x900 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?
A10 On Screen Display \(OSD\) Control Adjustment Screen Adjustment Making adjustments to the displays image size, position and operating parameters is quick and easy with the On Screen Display Control system(OSD). A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make by using the OSD. To make adjustments in the On Screen Display, follow these steps: Press the MENU button, then the main menu of the OSD appears. To select each item in the OSD menu, use the o r button. When the icon you want is highlighted, press the AUTO/SET Button. Use the / buttons to adjust the image to the desired level. Use the AUTO/SET button to select other sub-menu items. Press the MENU buttononce to return to the main menu to select another function. Press the MENU buttontwice to exit from the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making any image adjustments. AUTO/SET MENU MENU-+-+ -+ -+ On Screen Display (OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name Icons Button Tip PICTURE Sub-menus MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu -+ On Screen Display (OSD) Selection and Adjustment MENU: Exit : Decrease : Increase SET : Select another sub-menu Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To adjust the clearness of the screen. TRACKING TRACKING -+ MENU: Exit : Decrease : Increase SET : Select another sub-menu HORIZONTAL VERTICALTo move image left and right. To move image up and down. POSITION POSITION -+ Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.
On Screen Display (OSD) Selection and Adjustment A13 Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images.PICTURE PICTURE PRESET RED GREEN BLUE• sRGB: Set the screen color to fit the SRGB standard color specification. • 6500K: Slightly reddish white. • 9300K: Slightly bluish white. Set your own red color levels. Set your own green color levels. Set your own blue color levels. COLOR COLOR MENU: Exit : Decrease : Increase SET : Select another sub-menu-+ MENU: Exit : Decrease : Increase SET : Select another sub-menu-+
A10 On Screen Display \(OSD\) Control Adjustment Screen Adjustment Making adjustments to the displays image size, position and operating parameters is quick and easy with the On Screen Display Control system(OSD). A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make by using the OSD. To make adjustments in the On Screen Display, follow these steps: Press the MENU buttonthen the main menu of the OSD appears. To select each item in the OSD menu, use the buttonWhen the icon you want is highlighted, press the AUTO/SET Button Use buttonsadjust the image to the desired level. Use the AUTO/SET button select other sub-menu items. Press the MENU buttononce to return to the main menu to select another function. Press the MENU buttontwice to exit from the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making any image adjustments. AUTO/SET MENU MENU-+-+ -+ -+ On Screen Display (OSD) Selection and Adjustment NOTE OSD \(On Screen Display\) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name Icons Button Tip PICTURE Sub-menus MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu -+ On Screen Display (OSD) Selection and Adjustment MENU: Exit : Decrease : Increase SET : Select another sub-menu Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To adjust the clearness of the screen. TRACKING TRACKING -+ MENU: Exit : Decrease : Increase SET : Select another sub-menu HORIZONTAL VERTICALTo move image left and right. To move image up and down. POSITION POSITION -+ Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.
A11 On Screen Display (OSD) Selection and Adjustment NOTE The order of icons may differ depending on the model \(A11~A16\). The following table indicates all the On Screen Display control, adjustment, and setting menus. To adjust the brightness, contrast and gamma of the screenPICTURE COLOR POSITION TRACKING SETUP Main menu Sub-menu A D Reference PRESET RED GREEN BLUE To adjust the position of the screen To customize the color of the screen To customize the screen status for a users operating environment To improve the clarity and stability of the screen BRIGHTNESS CONTRAST GAMMA HORIZONTAL VERTICAL CLOCK PHASE SHARPNESS WHITE BALANCE POWER INDICATOR 4:3 IN WIDE FACTORY RESET LANGUAGE OSD HORIZONTAL POSITION VERTICAL sRGB 6500K 9300K : Adjustable A : Analog Input D : Digital Input To select or customize desired image settingsFLATRON F-ENGINEMOVIE / TEXT USER NORMAL On Screen Display (OSD) Selection and Adjustment Press the button to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal. SETUP To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen.LANGUAGE OSD POSITION WHITE BALANCE FACTORY RESET If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. POWER INDICATOR Restore all factory default settings except LANGUAGE. SETUP SETUP Use this function to set the power indicator on the front side of the monitor to ONor OFF. If you set OFF, it will go off. If you set ONat any time, the power indicator will automatically be turned on. - MENU: Exit : Adjust : Adjust SET : Select another sub-menu-+ 4:3 IN WIDETo select the image size of the screen. Main menu Sub menu Description WIDE4:3 Resolution Screen ratio 1280x1024 1152x864 1024x768 800x600 640x480 720x4805 : 4 4 : 3 4 : 3 4 : 3 4 : 3 3 : 2 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. (The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3.) The input signal which the 4:3 IN WIDE does not support 4:3 is the following. -The 19 inch monitor is 720x400,1280x768,1360x768,1440x900 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?
A16 On Screen Display (OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description To adjust the USER sub-menu function, Press the SET Button MOVIE TEXT NORMAL USER When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied screen will appear on the right side.Touch the SET button to use the adjusted screen. FLATRON F-ENGINEScreen when applied Screen when not applied The OSD screen will appear when you touch the (-) \ button on the front o f the monitor. TEXT: For text images (Word processing etc.) Select the sub-menu using the SET button and save the YESvalue using the buttons.SAVE MOVIE: For animation images in videos or movies This is under normal operating conditions. This feature lets you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc). User You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different environment. ...(Brightness): Adjusts screen brightness....ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode. Not applied Green enhance Flesh tone Color Enhance0 1 2 3 MENU : Exit , : Move SET : Select-+ MENU : Exit : Decrease : Increase SET : Select another sub-menu-+
A11 On Screen Display (OSD) Selection and Adjustment NOTE The order of icons may differ depending on the model \(A11~A16\). The following table indicates all the On Screen Display control, adjustment, and setting menus. To adjust the brightness, contrast and gamma of the screenPICTURE COLOR POSITION TRACKING SETUP Main menu Sub-menu A D Reference PRESET RED GREEN BLUE To adjust the position of the screen To customize the color of the screen To customize the screen status for a users operating environment To improve the clarity and stability of the screen BRIGHTNESS CONTRAST GAMMA HORIZONTAL VERTICAL CLOCK PHASE SHARPNESS WHITE BALANCE POWER INDICATOR 4:3 IN WIDE FACTORY RESET LANGUAGE OSD HORIZONTAL POSITION VERTICAL sRGB 6500K 9300K : Adjustable A : Analog Input D : Digital Input To select or customize desired image settingsFLATRON F-ENGINEMOVIE / TEXT USER NORMAL On Screen Display (OSD) Selection and Adjustment Press the button to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal. SETUP To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen.LANGUAGE OSD POSITION WHITE BALANCE FACTORY RESET If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. POWER INDICATOR Restore all factory default settings except LANGUAGE. SETUP SETUP Use this function to set the power indicator on the front side of the monitor to ONor OFF. If you set OFF, it will go off. If you set ONat any time, the power indicator will automatically be turned on. MENU: Exit : Adjust : Adjust SET : Select another sub-menu-+ 4:3 IN WIDETo select the image size of the screen. Main menu Sub menu Description WIDE4:3 Resolution Screen ratio 1280x1024 1152x864 1024x768 800x600 640x480 720x4805 : 4 4 : 3 4 : 3 4 : 3 4 : 3 3 : 2 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. \(The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3.\) The input signal which the 4:3 IN WIDE does not support 4:3 is the following. -The 19 inch monitor is 720x400,1280x768,1360x768,1440x900 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?• Check and see if the power cord is connected properly to the power outlet. • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the Specifications section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENUbutton for several seconds: the message “OSD UNLOCKED”will appear. Do you see “OSD LOCKED” when you push MENU button? A19 Troubleshooting Have you installed the display driver? Have you installed the display driver? Do you see an Unrecognized monitor, Plug&Play (VESA DDC) monitor found message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. • Make sure to check if the video card supports Plug&Play function. Display image is incorrect The screen color is mono or abnormal. The screen blinks.• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Specifications Indicator On Mode Sleep Mode Off Modeblue amber Off LED Color MODE Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 *15 **16640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 1440 x 900 1440 x 900 1440 x 90031.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 68.681 61.805 63.981 79.976 55.500 55.935 70.63570 70 60 75 60 75 75 60 75 75 65 60 75 60 60 75 *Recommend Mode **Only Analog Mode
A10 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the displays image size, position and operating parameters is quick and easy with the On Scr system\(OSD\). A short example is given below to familiarize you with the use of the contr adjustments and selections you can make by using the OSD. To make adjustments in the On Screen Display, follow these steps: Press the MENU buttonthen the main menu of the OSD appears. To select each item in the OSD menu, use the buttonWhen the icon you want is highlighted, press the AUTO/SET Button Use buttonsadjust the image to the desired level. Use the AUTO/SET button select other sub-menu items. Press the MENU buttononce to return to the main menu to select another function. Press the MENU buttontwice to exit from the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making any image adjustments. AUTO/SET MENU MENU-+-+ -+ -+ On Screen Display (OSD) Selection and Adjustment NOTE OSD \(On Screen Display\) menu languages on the monitor may differ from the manual. Y using the OSD system. Listed below ar descriptions of the all items shown on the Menu. Pr Menu Name Icons Button T PICTURE Sub-menus MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu -+ On Screen Display (OSD) Selection and Adjustment MENU: Exit : Decrease : Increase SET : Select another sub-menu Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To adjust the clearness of the screen. TRACKING TRACKING -+ MENU: Exit : Decrease : Increase SET : Select another sub-menu HORIZONTAL VERTICALTo move image left and right. To move image up and down. POSITION POSITION -+ Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.• Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V positionicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCKicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASEicon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Important Check Control Panel --> Display --> Settingsand see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. Reasons for Recommending Optimal Resolution: The aspect ratio is 16:10. If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter problems such as blurred letters, blurry screen, cut-off screen display or tilted screen. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer . Specifications Signal Connector Pin Assignment 18 9 1724 16 Pin Signal(DVI-D) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T. M. D. S. Data2- T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4- T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync. T. M. D. S. Data1- T. M. D. S. Data1+ T. M. D. S. Data1/3 Shield T. M. D. S. Data3- T. M. D. S. Data3+ +5V Power Ground \(return for +5V, H. Sync. and V. Sync.\) Pin Signal(DVI-D) 16 17 18 19 20 21 22 23 24Hot Plug Detect T. M. D. S. Data0- T. M. D. S. Data0+ T. M. D. S. Data0/5 Shield T. M. D. S. Data5- T. M. D. S. Data5+ T. M. D. S. Clock Shield T. M. D. S. Clock+ T. M. D. S. Clock- T. M. D. S. (Transition Minimized Differential Signaling) DVI-D Connector Specifications Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. 1 2
A11 On Screen Display (OSD) Selection and Adjustment NOTE The order of icons may differ depending on the model \(A11~A16\). The following table indicates all the On Scr and setting menus. To adjust the brightness, contrast and gamma of the screenPICTURE COLOR POSITION TRACKING SETUP Main menu Sub-menu A D Reference PRESET RED GREEN BLUE To adjust the position of the screen To customize the color of the screen To customize the screen status for a users operating environment To improve the clarity and stability of the screen BRIGHTNESS CONTRAST GAMMA HORIZONTAL VERTICAL CLOCK PHASE SHARPNESS WHITE BALANCE POWER INDICATOR 4:3 IN WIDE FACTORY RESET LANGUAGE OSD HORIZONTAL POSITION VERTICAL sRGB 6500K 9300K : Adjustable A : Analog Input D : Digital Input To select or customize desired image settingsFLATRON F-ENGINEMOVIE / TEXT USER NORMAL On Screen Display (OSD) Selection and Adjustment Press the button to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal. SETUP To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen.LANGUAGE OSD POSITION WHITE BALANCE FACTORY RESET If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. POWER INDICATOR Restore all factory default settings except LANGUAGE. SETUP SETUP Use this function to set the power indicator on the front side of the monitor to ONor OFF. If you set OFF, it will go off. If you set ONat any time, the power indicator will automatically be turned on. MENU: Exit : Adjust : Adjust SET : Select another sub-menu-+ 4:3 IN WIDETo select the image size of the screen. Main menu Sub menu Description WIDE4:3 Resolution Screen ratio 1280x1024 1152x864 1024x768 800x600 640x480 720x4805 : 4 4 : 3 4 : 3 4 : 3 4 : 3 3 : 2 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. \(The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3.\) The input signal which the 4:3 IN WIDE does not support 4:3 is the following. -The 19 inch monitor is 720x400,1280x768,1360x768,1440x900 Troubleshooting No image appears Check the following befor No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?• Check and see if the power cord is connected properly to the power outlet. • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the Specifications section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENUbutton for several seconds: the message “OSD UNLOCKED”will appear. Do you see “OSD LOCKED” when you push MENU button? A19 Troubleshooting Have you installed the display driver? Have you installed the display driver? Do you see an Unrecognized monitor, Plug&Play (VESA DDC) monitor found message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. • Make sure to check if the video card supports Plug&Play function. Display image is incorrect The screen color is mono or abnormal. The screen blinks.• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Specifications Indicator On Mode Sleep Mode Off Modeblue amber Off LED Color MODE Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 *15 **16640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 1440 x 900 1440 x 900 1440 x 90031.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 68.681 61.805 63.981 79.976 55.500 55.935 70.63570 70 60 75 60 75 75 60 75 75 65 60 75 60 60 75 *Recommend Mode **Only Analog Mode