LG Flatron L1760tr Users Guide

							A10
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET            : Enter
: Select another sub-menu
-+
 
						

							A11
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.PICTURE
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
POSITION
COLOR
POSITION
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
-+
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
-+
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
-+
 
						

							A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
SETUPTo choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.   
POWER
INDICATOR
Restore all factory default settings except
LANGUAGE. 
TRACKING
SETUP
MENU
-+
SET
SETUP
MENU-+
SETUse this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
Press the       button to reset immediately.+
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
-+
MENU: Exit
: Adjust
: Adjust
SET: Select another sub-menu
-+
 
						

							A13
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the  SET Button
MOVIE 
TEXT
NORMAL
BRIGHTNESS 
ACE
1
2RCM 
SAVE
USER
MENU SET
USER
When you execute F-ENGINE, two tones will appear 
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
FLATRON F-ENGINEScreen when applied Screen when not applied
The OSD screen will appear when you touch the                   button o\
n the  right side of the monitor.
TEXT: For text images (Word processing etc.)
Select the           sub-menu using the  SET button
and save the  YESvalue using the  buttons.SAVE
MOVIE: For animation images in videos or movies 
This is under normal operating conditions.
This feature lets you easily select the best desired 
image condition optimized to the environment
(ambient illumination, image types etc).
User
You can manually adjust brightness, ACE or RCM.  
You can save or restore the adjusted value even 
when using a different envir 
...(Brightness): Adjusts screen brightness....ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.
Not applied 
Green enhance 
Flesh tone
Color Enhance0
1
2
3
MENU : Exit
,     : Move
SET     : Select-+
MENU : Exit
: Decrease
: Increase
SET     : Select another sub-menu-+
 
						

							A14
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							A15
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The screen color is
mono or abnormal.
The screen blinks.• Press the SET/AUTObutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
• Press the SET/AUTObutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the SET/AUTObutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
 
						

							A16
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Do you see an
Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
 
						

							A17
Specifications                                                          \
          17 inch
Display 
Sync Input 
Video Input 
Resolution 
Plug&Play 
Power 
Consumption 
Dimensions&Weight
Tilt Range 
Power Input 
AC-DC Adapter 
Environmental 
Conditions 
Stand Base  
Power cord 
NOTE Information in this document is subject to change without notice.
17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating
Visible diagonal size : 43.2 cm
0.264 mm pixel pitch
Horizontal Freq.  Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form  
SOG (Sync On Green), Digital
Signal Input 15 pin D-Sub Connector DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital 
Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz
Recommend VESA 1280 x 1024 @60 Hz
DDC 2B 
On Mode : 30 W(Typ.)
Sleep Mode : 1 W(Typ.) 
Off Mode ≤1 W
Width x Height x Depth
[1] 39.21cm(15.44inches) x 39.10cm(15.39inches) x 22.60cm(8.90inche\
s)
[2] 39.21cm(15.44inches) x 44.19cm(17.40inches) x 9.62cm(3.78inches\
)
Net 3.7 kg (8.16 lbs) 
Tilt -5 ˚~20 ˚
12V         3.0A
DVE, DSA-0421S-12 1 42 or Lien Chang, LCAP07F 
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
Attached(    ), Detached ( O ) 
Wall-outlet type or PC-outlet type
S O U
R
CE
S O U
R
CE
M E
N U
M E
N U S
E
T/
A
U TO
S E
T/
A
U TOEn gi
n e
En gi
n e
(Width)
(Depth)(Height)
S
O UR
CE
S O UR
CE
M E
N U
M E
N U S
E
T/
A
U T
O
S E
T/
A
U T
OEn g
i
n e
En g
i
n e
(Width)
(Depth)(Height)
Separate Sync, Positive / Negative
 
						

							A18
Specifications                                                          \
          19 inch
NOTEInformation in this document is subject to change without notice.
Display 
Sync Input 
Video Input 
Resolution 
Plug&Play 
Power 
Consumption 
Dimensions&Weight
Tilt Range 
Power Input 
AC-DC Adapter 
Environmental 
Conditions 
Stand Base  
Power cord19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating
Visible diagonal size : 48.19 cm
0.294 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form SOG (Sync On Green), Digital
Signal Input 15 pin D-Sub Connector DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital 
Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz
Recommend VESA 1280 x 1024 @60 Hz
DDC 2B 
On Mode :      35 W(Typ.)
Sleep Mode : 1 W(Typ.) 
Off Mode ≤1 W
Width x Height x Depth
[1] 42.99cm(16.93inches) x 42.61cm(16.78inches) x 22.60cm(8.90inche\
s)
[2] 42.99cm(16.93inches) x 47.86cm(18.84inches) x 9.71cm(3.82inches\
)
Net 4.6 kg (10.14 lbs) 
Tilt -5 ˚~20 ˚
12V         3.0A
DVE, DSA-0421S-12 1 42 or Lien Chang, LCAP07F 
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
Attached(    ), Detached ( O ) 
Wall-outlet type or PC-outlet type
S O U
R
CE
S O U
R
CE
M E
N U
M E
N U S
E
T/
A
U T
O
S E
T/
A
U T
OEn g
i
n e
En g
i
n e
(Width)
(Depth)(Height)
S
O U
R
C E
S O U
R
C E
M E
N U
M E
N U S
E
T/
A
U TO
S E
T/
A
U TOEngi
n e
E ngi
n e
(Width)
(Depth)(Height)
Separate Sync, Positive / Negative
 
						

							A19
Specifications
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
*12
**13640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 102431.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.97670
70
60
75
60
75
75
60
75
75
65
60
75 VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
Indicator
On Mode
Sleep Mode
Off Modeblue
amber
Off
LED Color
MODE
Preset Modes (Resolution)
* Recommend Mode
**
Only Analog Mode