LG Flatron L1760tr Users Guide

Make sure to read the Important Precautionsbefore using the monitor. 
Keep the Users Guide(CD) in an accessible place for furture reference.
See the label attached on the monitor and give the information to your
dealer when you ask for service.
L1760TQ
L1960TQ
L1760TG
L1960TG
L1760TR
L1960TR
L1960TC
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which...

Connecting the Display
A3
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Once you connect the stand base, try not to disconnect it.
Do not carry the monitor upside down holding only the stand base. The monitor may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Attaching/Separating the stand base...

A4
Connecting the Display
To attach or separate the back cap
1. To attach the back cap, fix into the 3 holes first then slide it up to fit to the upper 
groove.
2. To separate the back cap, hold the bottom part and pull it out.
Kensington Security SlotConnected to a locking 
cable that can be purchased
separately at most computer stores
Back Cap
NOTE
- Cover the back cap after connecting the cables before use.
(To connect the cable, see page A5 for reference.)
 

DVI-D DC-IN D-SUB
A5
Connecting the Display
Connecting with the PC
1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
2.Connect the signal cable      . When attached, tighten the thumbscrews to secure the 
connection.
3.Connect the power cable      with the AC-DC adapter (AC-DC power supply)     , and
then plug the cable in the outlet.
Wall-outlet type
DVI-D(This feature is not available in all countries.)
Mac adapterFor...

A6
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
+   - ButtonsUse these buttons to select or adjust...

A7
Control Panel Functions
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber. Touching on the    button for several seconds will
power up the unit and touching on it again for
several seconds will power off.
Power Button
Power Indicator
Use this button to enter a selection in the On Screen 
Display.SET/AUTO
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the...

A8
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu...

A9
NOTE
The order of icons may differ depending on the model (A9~A13).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 
Main menu Sub-menu A      D                    Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a users...