LG Flatron L1730sf Users Guide

A10
On Screen Display(OSD) Selection and Adjustment 
NOTE
The order of icons may differ depending on the model (A10~A14). 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
PICTURE
COLOR
POSITION
TRACKING
SETUP
Main menu Sub menu                                  Reference
PRESET   sRGB
6500K
9300K
RED
GREEN
BLUE
To adjust the brightness,
contrast and gamma of the
screen
To adjust the position of the
screen To customize the color of the
screen
To customize the...

A11
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
:...

A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.PICTURE
PICTURE
PRESET
RED
GREEN
BLUESelect the screen color. 
• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
•...

A13
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING
If this does not improve the screen image, restore the factory default settings. 
If necessary,...

A14
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the SET Button
MOVIE
TEXT
NORMAL
BRIGHTNESS
ACE
1
2RCM
SAVE
USER
MENU SET
USER
When you execute F-ENGINE, two tone will appear
on the screen as shown in the picture. The applied
screen will appear on the left side, whereas the non-
applied screen will appear on the right side.Press the
SET button to use the adjusted screen.
FLATRON F-ENGINEScreen...

A15
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an "OUT
OF RANGE" message
on the screen?
Do you see a "CHECK
SIGNAL CABLE
"message on the
screen?
Do you see a OSD LOCKED message on the screen?
Check and see if the power cord is connected
properly to the power...

A16
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The screen color is
mono or abnormal.
The screen blinks.
Press the SET/AUTObutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check...

A17
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Make sure to check if the video card supports
Plug&Play function.
Touch screen does not work.
Install the touch screen driver on the...

A18
Specifications
NOTEInformation in this document is subject to change without notice.
17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating
Visible diagonal size : 43.2 cm
0.264 mm pixel pitch 
Horizontal Freq. 30 - 83kHz (Automatic)
Vertical Freq. 56 - 75Hz (Automatic)
Input Form Separate Sync, Positive / Negative
Composite Sync, Positive / Negative SOG (Sync On Green) 
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7Vp-p/75ohm)
Max VESA 1280 x 1024@75Hz 
Recommend...

A19
Specifications
Preset Modes (Resolution)
Indicator
On Mode
Sleep Mode
Off Modegreen
amber
off
LED Color MODE
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
*12
13640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 102431.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.97670
70
60
75
60
75
75
60
75
75
65
60
75 VGA
VGA
VGA
VESA
VESA
VESA...