LG Flatron L1730sf Users Guide

Make sure to read the Important Precautionsbefore using the product. 
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the back cover and quote this information to your
dealer when you require service.
User’s Guide
L1730SF
kownloadedsfromsManualMonitorRcomsManuals 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which...

A3
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off. 
Positioning your display
1.Remove the tape.
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
Height Range : maximum 2.41inch (61.3mm)
Landscape & Portrait : You can rotate the panel 90o  clockwise. 
(* For detailed information,...

A4
Connecting the Display
Using the Computer
1.Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection. 
2.Connect the power cord into a proper power outlet that is easily accessible and
close to the display.
3.Press        button on the front switch panel to turn the
power on. When monitor power is turned on, the Self
Image Setting Function is executed automatically.
(Only analog mode)
NOTEThis is a simplified representation of the rear view.
This rear view represents a...

A5
Conne\fting the Displ\u\by
To Use Touch Screen
Sele\ft \bnd Inst\bll the\u driver CD provide\ud.
* Do not select install PS/2 interface driver  while
installing the touch screen driver for the Hantouch.
1) Insert the driver installation CD for the ITM touch screen. 
2) See the touch screen software installation CD for more  information and assistance.
3) Connect the USB cable or the RS-232C cable for the touch screen  after the driver installation. 
* The software drivers support the following...

A6
Connecting the Display
Touch Screen
RS-232C
< USB cable for the touch screen>
Signal 
Cable Power 
CordRS-232C
Touch Screen
USB
< RS-232C cable for the touch screen>
Touch
Screen
USB
Signal 
Cable Power 
CordRS-232CTouch
Screen
RS-232C
NOTE
Your purchased product and its accessories may look different from the items
illustrated in this manual.
 

A7
Control Panel Functions
MENUSET/AUTO-+
Front Panel Controls
Bottom
ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
MENU ButtonUse this button to enter or exit the On Screen Display.
-+
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor 5 seconds. The
message "OSD LOCKED"should appear.
You can unlock the OSD controls at any time by...

A8
Control Panel Functions
Use this button to turn the display on or off.Power Button
Use this button to enter a selection in the On Screen 
Display.SET/AUTO
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the SET/AUTObutton before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
1280x1024
Control Function
This Indicator lights up...

A9
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu...