Home > LG > Monitor > LG Flatron E2340s Users Guide

LG Flatron E2340s Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual LG Flatron E2340s Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							20
    On Screen Display(OSD) Selection and Adjustment 
     
    Main menu Sub menu Description
    NORMALThe PhotoEffect function is disabled.
    GAUSSIAN
    BLURThis menu changes the screen to be more
    colorful and smoother. 
    SEPIAThis menu changes the screen to be
    Sepia tone (brown color). 
    MONOCH
    -ROMEThis menu changed the screen to be
    Gray tone (black-and-white Picture).
    Exit: Exit,    : Move
    : Select another sub-menu
    : Restart to select sub-menu
     
    						
    							21
    Troubleshooting
    No image appears
    Check the following before calling for service.
    No image appears
    Do you see a OSD LOCKED message on the screen?
    Is the power cord of the
    display connected?
    Is the power indicator
    light on?
    Is the power indicator
    flickering?
    Do you see an OUT OF
    RANGE message on
    the screen?
    Do you see a CHECK
    SIGNAL CABLE
    message on the
    screen?• Check and see if the power cord is connected
    properly to the power outlet.
    • Press the Power button.
    • If the display is in power saving mode, try moving
    the mouse or pressing any key on the keyboard to
    bring up the screen.
    • Try to turn on the PC.
    • This message appears when the signal from the
    PC (video card) is out of horizontal or vertical
    frequency range of the display. See the
    Specifications section of this manual and
    configure your display again.
    • This message appears when the signal cable
    between your PC and your display is not
    connected. Check the signal cable and try again.
    • You can secure the current control settings,
    so that they cannot be inadvertently changed.
    You can unlock the OSD controls at any time
    by pushing the MENUbutton for several
    seconds: the message 
    OSD UNLOCKEDwill appear. Do you see OSD
    LOCKED when you
    push MENU button?
     
    						
    							22
    Troubleshooting
    Display image is incorrect
    Display Position is
    incorrect.
    On the screen
    background, vertical
    bars or stripes are
    visible.
    Any horizontal noise
    appearing in any
    image or characters
    are not clearly
    portrayed.• Press the AUTObutton to automatically adjust
    your display image to the ideal setting. 
    If the results are unsatisfactory, adjust the image
    position using the H position and V positionicon
    in the on screen display.
    • Press the AUTObutton to automatically adjust
    your display image to the ideal setting.
    If the results are unsatisfactory, decrease the
    vertical bars or stripes using the CLOCKicon in
    the on screen display.
    • Press the AUTObutton to automatically adjust
    your display image to the ideal setting.
    If the results are unsatisfactory, decrease the 
    horizontal bars using the PHASEicon in the on 
    screen display.
    • Check Control Panel --> Display --> Settings
    and adjust the display to the recommended
    resolution or adjust the display image to the ideal
    setting. Set the color setting higher than 24 bits
    (true color).
    IMPORTANT
    Check Control Panel --> Display --> Settingsand see if the frequency or the
    resolution were changed. If yes, readjust the video card to the recommend
    resolution.
    If the recommended resolution (optimal resolution) is not selected, letters may be
    blurred and the screen may be dimmed, truncated or biased. Make sure to select
    the recommend resolution. 
    The setting method can differ by computer and O/S (Operation System), 
    and resolution mentioned above may not be supported by the video card    
    performance. In this case, please ask to the computer or the video card  
    manufacturer. 
     
    						
    							23
    Troubleshooting
    The Audio function is not working
    Display image is incorrect
    The screen color is
    mono or abnormal.
    The screen blinks.• Check if the signal cable is properly connected
    and use a screwdriver to fasten if necessary.
    • Make sure the video card is properly inserted in
    the slot.
    • Set the color setting higher than 24 bits (true color)
    at Control Panel - Settings.
    • Check if the screen is set to interlace mode and if
    yes, change it to the recommend resolution.
    Picture OK & No sound.• Check whether volume is 0.
    • Check sound muted.
    • HDMI cable installed properly.
    • Head phone cable installed properly.
    • Check sound format. Not supply to compressed
    sound format.
    Do you see an Unrecognized monitor, Plug&Play (VESA
    DDC) monitor found message?
    Have you installed the
    display driver?• Be sure to install the display driver from the display
    driver CD (or diskette) that comes with your
    display. Or, you can also download the driver from
    our web site: http://www.lge.com.
    • Make sure to check if the video card supports
    Plug&Play function.
     
    						
    							24
    Specifications                                                                 E2240V
    54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
    Visible diagonal size: 54.6cm
    0.248 x 0.248 mm (Pixel pitch)
    Display
    Horizontal Freq. 30 kHz to 83 kHz (Automatic)
    Vertical Freq. Analog,Digital : 56 Hz to 75 Hz (Automatic)
    HDMI : 56 Hz to 61 Hz (Automatic)
    Input Form Separate Sync.
    DigitalSync Input
    Signal Input 15 pin D-Sub Connector
    DVI - D Connector (Digital)
    19 pin HDMI Connector
    Input Form Analog (0.7 Vp-p/ 75 ohm), Digital, HDMIVideo Input
    Max VESA 1920 x 1080 @ 60 Hz
    Recommend VESA 1920 x 1080 @ 60 HzResolution
    Plug&Play
    On Mode:23 W (Typ.)Sleep Mode≤1 W
    Off Mode≤1 WPower
    Consumption
    Operating Conditions
    Temperature 10 ˚C to 35 ˚C
    Humidity 10 % to 80 % non-Condensing
    Storage Conditions
    Temperature -20 ˚C to 60 ˚C
    Humidity 5 % to 90 % non-CondensingEnvironment
    al Conditions
    With Stand
    Width    52.98 cm (20.85 inch) 
    Height 41.03 cm (16.15 inch)     
    Depth 20.20 cm (  7.95 inch)
    Weight (excl. packing) 2.9 kg (6.39 lb)Dimensions
    & Weight
    Tilt: -5˚ to 15˚Range
    12 V       3.0 A Power Input
    Attached (     ), Detached ( O )Stand Base 
    Wall-outlet typePower cord 
    DDC 2B (Digital, HDMI), DDC 2AB (Anlaog)
    Without Stand
    Width    52.98 cm (20.85 inch)
    Height 33.78 cm (13.29 inch)   
    Depth 4.30 cm (   1.69 inch)
    NOTE
    Information in this document is subject to change without notice.
    Type FSP036-DGAA1,manufactured by FSP Group
    or type LCAP07F,manufactured by Lienchange ElectronicsAC-DC Adapter
     
    						
    							25
    Specifications                                                                   E2340V
    58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
    Visible diagonal size: 58.4cm
    0.265 x 0.265 mm (Pixel pitch)
    Display
    Max VESA 1920 x 1080 @ 60 Hz
    Recommend VESA 1920 x 1080 @ 60 HzResolution
    Plug&Play
    On Mode:28 W (Typ.)Sleep Mode≤1 W
    Off Mode≤1 WPower
    Consumption
    Operating Conditions
    Temperature 10 ˚C to 35 ˚C
    Humidity 10 % to 80 % non-Condensing
    Storage Conditions
    Temperature -20 ˚C to 60 ˚C
    Humidity 5 % to 90 % non-CondensingEnvironment
    al Conditions
    With Stand
    Width    56.38 cm (22.19 inch)
    Height 43.00 cm (16.92 inch)     
    Depth 20.20 cm (  7.95 inch)
    Weight (excl. packing) 3.2 kg (7.05 lb)Dimensions
    & Weight
    Tilt: -5˚ to 15˚Range
    12 V       3.0 A Power Input
    Attached (     ), Detached ( O )Stand Base 
    Wall-outlet typePower cord 
    DDC 2B (Digital, HDMI), DDC 2AB (Anlaog)
    Without Stand
    Width    56.38 cm (22.19 inch) 
    Height 35.75 cm (14.07 inch)   
    Depth 4.30 cm (   1.69 inch)
    NOTE
    Information in this document is subject to change without notice.
    Horizontal Freq. 30 kHz to 83 kHz (Automatic)
    Vertical Freq. Analog,Digital : 56 Hz to 75 Hz (Automatic)
    HDMI : 56 Hz to 61 Hz (Automatic)
    Input Form Separate Sync.
    DigitalSync Input
    Signal Input 15 pin D-Sub Connector
    DVI - D Connector (Digital)
    19 pin HDMI Connector
    Input Form Analog (0.7 Vp-p/ 75 ohm), Digital, HDMIVideo Input
    Type FSP036-DGAA1,manufactured by FSP Group
    or type LCAP07F,manufactured by Lienchange ElectronicsAC-DC Adapter
     
    						
    							26
    Specifications
    Preset Modes (Resolution)
    Indicator
    On Mode
    Sleep Mode
    Off ModeWhite
    White Blinking
    Off
    LED Color
    MODE
    Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
    * Recommend Mode
    D-SUB/DVI-D Timing
    Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
    1
    2
    3
    4
    5
    6
    7
    8480P
    576P
    720P
    720P
    1080i
    1080i
    1080P
    1080P31.50
    31.25
    37.50
    45.00
    28.12
    33.75
    56.25
    67.5060
    50
    50
    60
    50
    60
    50
    60
    HDMI Timing
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    *12720 x 400
    640 x 480
    640 x 480
    800 x 600
    800 x 600
    1024 x 768
    1024 x 768
    1152 x 864
    1280 x 1024
    1280 x 1024
    1680 x 1050
    1920 x 108031.468
    31.469
    37.500
    37.879
    46.875
    48.363
    60.123
    67.500
    63.981
    79.976
    65.290
    67.50070
    60
    75
    60
    75
    60
    75
    75
    60
    75
    60
    60
     
    						
    All LG manuals Comments (0)

    Related Manuals for LG Flatron E2340s Users Guide