LG Flatron E2340s Users Guide

							10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     Buttonsto adjust the image to the desired level. 
Use the       Button to select other sub-menu items.
Press the EXIT Buttonto exit from the OSD. 1
2
3
4
 
						

							11
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustm\
ent, 
and setting menus.
F-ENGINE NORMALMOVIE 
INTERNET
DEMO
STANDARD
MOVIE
GAME
SPORTS
ORIGINAL WIDE
RATIO             ORIGINAL 
PHOTO           NORMAL 
EFFECT           
GAUSSIAN BL UR
SEPIA
MONOCHROME
MODETo select or customize desired 
image settings
: D-SUB(Analog signal) input  
: DVI-D(Digital signal) input
: HDMI signalDSUB
DVI-D
DSUBDVI-D
LANGUAGE  
POWER INDICATOR 
WHITE BALANCE 
FACTORY RESETTo customize the screen status 
for a users operating
environmentOTHERS
HORIZONTAL 
VERTICAL 
CLOCK 
PHASE 
OVERSCANDISPLAYTo adjust the position of the 
screen  
COLOR TEMP  (PRESET / USER)
GAMMACOLORTo customize the color of the 
screen
BRIGHTNESS 
CONTRAST
SHARPNESS 
BLACK LEVELPICTURETo adjust the brightness, contrast 
and sharpness of the screen
NOTE  The order of icons may differ depending on the model (11~20).
DSUB
DSUB
DSUB
Main menu Sub-menu            Supported inputDescription
To improve the clarity and 
stability of the screen 
VOLUMETo adjust the volume
To adjust the image size 
To adjust the image size
HDMI
HDMI
HDMI
HDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUB
DVI-D
HDMI
DSUB
DVI-DHDMI
DSUB
DVI-D
 
						

							12
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MENUButton, then the main menu of the OSD appears.
 
						

							13
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
PRESETSelect the screen color. 
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
REDSet your own red color levels.
GREENSet your own green color levels.
BLUESet your own blue color levels.
GAMMA
Set your own gamma value. : 0 / 1 / 2
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.
COLOR TEMP
USER
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
BRIGHTNESS
CONTRAST 
SHARPNESS
BLACK LEVELTo adjust the brightness of the screen. 
To adjust the contrast of the screen.
To adjust the clearness of the screen.
You can set the offset level. If you select
HIGH, the screen will be bright and if you
select ‘LOW’, the screen will be dark. 
(only for HDMI input)
* Offset?As the criteria for video signal, it
is the darkest screen the monitor can
show.
 
						

							14
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
OVERSCAN
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To select the range of output image
for DTV timing in HDMI input.
(only for HDMI input)
Recommend overscanfunction to
turn on when connect AVequipment.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
VOLUME
To adjust the volume of headphone/
Earphone.
(Only for HDMI input)
Exit: Exit
: Decrease
: Increase
: Mute
: Restart to select sub-menu
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
Press the      ,       buttons to reset
immediately.
Main menu Sub menu Description
To choose the language in which the
control names are displayed.LANGUAGE
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal. 
Exit : Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Sub-
menus Menu Name
Icons
Button
Tip Press the MODEButton, then the main menu of the OSD appears.
Exit: Exit,    : Move
: Select another sub-menu
: Restart to select sub-menu
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Exit: Exit
,    : Move
: Select another sub-menu
: Restart to select sub-menu
NORMAL
STANDARD
MOVIE
Select this when you want to use the product
in the most general using environment. 
Select this when you are watching a video or
movie.Select this when you want to use the original
standard video.
* In the General (Standard) mode, the                        
is turned off.
D-SUB/DVI-D input
HDMI input
D-SUB/DVI-D input
HDMI input
 
						

							18
INTERNET
GAME
DEMO
SPORTS
On Screen Display(OSD) Selection and Adjustment 
D-SUB/DVI-D inputSelect this when you are working on the
document (Word etc.)
Select this when you are playing a game.
This is used for advertising in the store. The
screen will be divided to show the standard
mode on the left and video mode on the right so
that the consumers can check the difference
after applying the video mode. 
Select this when you watching general sports.
Main menu Sub menu Description
HDMI input
D-SUB/DVI-D input
HDMI input
Exit: Exit,    : Move
: Select another sub-menu
: Restart to select sub-menu
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Change the input image signal ratio to
original. 
WIDE
ORIGINALSwitch to full screen mode according to
input image signal.  
* This function works only if input
resolution is lower than monitor ratio
(16:9).
Exit: Exit,    : Move
: Select another sub-menu
: Restart to select sub-menu