LG Flatron E2241t Owners Manual

							20
Display image is incorrect
Troubleshooting
The screen color is
mono or abnormal.
 The screen blinks. • Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings
.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor found message?
Have you installed the
display driver?• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lg.com.
• Make sure to check if the video card supports
Plug&Play function.
The Audio function is not working
Picture OK & No sound.• Check whether volume is 0.
• Check sound muted.
• HDMI cable installed properly.
• Head phone cable installed properly.
• Check sound format. Not supply to compressed sound format.
 
						

							(TYPE-A)
 
						

							(TYPE-A)
 
						

							(TYPE-A)
 
						

							-/+
-/+ -/-
-/-
+/+
+/+
+/+   +/+-/-
+/+
+/+
+/+Polarity(H/V) 
						

							Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Place the  monitor with i
 ts
 front facing  downwardon a soft cloth.
2.Remove the Stand Body  and Stand Base from product in correct direct ion 
as  shown  in the picture. 25
 
						

							26
Installing the Wall mount plate
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.
Kensington Security Slot
Connected to a locking cable that can
be purchased separately at most
computer stores.
Hole spacing : 75 mm x 75 mm.
3.Install the Wall mount plate.
NOTEVESA compatible only with respect to screw mounting interface dimensions\
 and mounting screw      
specifications
Please use VESA standard as below. * 784.8 mm and under (30.9 inch)  - Wall Mount Pad Thickness :  2.6 mm
- Screw :   4.0 mm x Pitch 0.7 mm x Length 10 mm    
* 787.4 mm and above (31.0 inch)  - Please use VESA standard wall mount pad and screws. 
 
						

							Make  sure  to  read  the  Safet y  Precautions 
before using the product.
Ke e p   t h e   OW N E R ’ S   M A N UA L (C D)   i n   a n 
accessible place for furture reference.
The  model  and  serial  number  of  the  SET  is 
located  on  the  back  or  one  side  of  the  SET. 
Record it below should you ever need service.
MODEL
SERIALAs  an  ENERGY  STAR  Partner  LGE  U.  S. A.,Inc. 
has  determined  that  this  product  meets  the 
ENERGY STAR guidelines for energy efficiency.
E N E R G Y   S TA R   i s   a   s e t   o f   p o w e r - s a v i n g 
guidelines  issued  by  the  U.S.Environmental 
Protection Agency(EPA).