LG Flatron E2241t Owners Manual

							10
Control Panel Functions
INPUT Button
Use 
this  button to turn t he display  on or off.
T he  power  indicator stays  blue if the  display is  running
properly (On  Mode). If the display is  in Sleep  Mode
blue . Power Button &
Power Indicator
(SOURCE Hot key)
Exit 
the O SD(On Sc reen Display).
EXIT Button 
SUPER ENERGY 
SAVING ButtonUse this button to enter SUPER ENERGY SAVING 
menus.For more information, refer to page 15 .
, t
he 
power  indicator is blink
ing  
(For D- SUB 
and DVI  input)
(Only for  HDMI input)
E2241 V/E2341 V/E2341 VG/E 2441V: 1920 x 1080
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default setting is D-Sub. 
Use this button to select source from input. 
 
						

							e
n.
s.
     /  /
.
n
1
2
3
4
11
 
						

							12
On Screen Display(OSD) Selection and Adjustment 
The following table  indicates a ll the On S creen Display contr ol, adjustment,
a nd  sett ing menus.
To cust omize the  screen status
for a  users  operating
environment
COLOR TEMP
(PRESET/USER)
LANGUAGE
MENUTo  adjus t the bright ness of
the s creen
To  adjus t the contrast of the
 s creen
NOTE 
The order of icons may differ depending on the model (12~17).
BRIGHTNESS
OR IGINAL RATIO
To 
To adjust the black level of the
screen  adjus
t the image size
Main menu Sub-menu            Suppo rted inputDescription
To  cust omize the  color of the 
screen
SUPER
ENERGY
SAVINGT urn on the SUPER ENERGY
SAVING function. 
Initialize the SUPER ENERGY
SAVING and set to OFF mode.  
Turn off the SUPER ENERGY
SAVING function.
FACTORY R ESET
BLACK LEVEL
CONTRAST
ON
OFF
RESET
 
						

							13,
 
						

							14
(Only HDMI input)
 
						

							15
 
						

							16
Turn on the SUPER ENERGY SAV-
ING function.Turn off the SUPER ENERGY SAV-
ING function. Now the monitor is 
LED SAVING function.
Clear the TOTAL POWER REDUC-
TION and TOTAL CO2 REDUCTION 
values.
 
						

							Saving Data depends on the Panel. So, those values should be different from each 
panel and panel vendor.
LG accumulate those values using integrated function with 10 minutes broadcast v-
ideo signal.
LED Saving means that how much power can be saved using WLED Panel instead 
of CCFL panel. 
SUPER Saving means that how much power can be more saved using SUPER E-
NERGY SAVING function. 
17  22 inch   23 inch   24 inchSAVING DATA(W/h) : 
						

							18
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
 Is the power indicator
light on?
 Is the power indicator
flickering?
 Do you see an OUT OF
RANGE message on
the screen?
 Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings, so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the  MENUbutton for several
seconds: the message 
“OSD UNLOCKED” will appear.
Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							19
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
 On the screen
background, vertical
bars or stripes are
visible.
 Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO button to automatically adjust
your display image to the ideal setting. 
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommen\
d
resolution.
If the recommended resolution (optimal resolution) is not selected, le\
tters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to \
select
the recommend resolution. 
The setting method can differ by computer and O/S (Operation System), \
 and resolution mentioned above may not be supported by the video card   \
 
performance. In this case, please ask to the computer or the video card \
 
manufacturer.